Remove jstest copy of nopt, which will not run on Node <= v12

Set close timer before closing the driver.

.github/workflows/test.yml

@@ -0,0 +1,41 @@
+on:
+  - push
+  - pull_request
+
+jobs:
+  test:
+    strategy:
+      fail-fast: false
+      matrix:
+        node:
+          - '0.8'
+          - '0.10'
+          - '0.12'
+          - '4'
+          - '6'
+          - '8'
+          - '10'
+          - '12'
+          - '14'
+          - '16'
+          - '18'
+          - '20'
+    name: node.js v${{ matrix.node }}
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+
+      - uses: actions/setup-node@v2
+        with:
+          node-version: ${{ matrix.node }}
+
+      - if: matrix.node == '0.8'
+        run: npm conf set strict-ssl false
+
+      - run: node --version
+      - run: npm install
+
+      - run: npm install 'nopt@5'
+      - run: rm -rf node_modules/jstest/node_modules/nopt
+
+      - run: npm test

.gitignore

@@ -1 +1,2 @@
 node_modules
+package-lock.json

.npmignore

@@ -1,6 +0,0 @@
-.git
-.gitignore
-.npmignore
-.travis.yml
-node_modules
-spec

.travis.yml

@@ -1,17 +0,0 @@
-sudo: false
-language: node_js
-
-node_js:
-  - "0.8"
-  - "0.10"
-  - "0.12"
-  - "iojs-1"
-  - "iojs-2"
-  - "iojs-3"
-  - "4"
-  - "5"
-  - "6"
-  - "7"
-
-before_install:
-  - '[ "${TRAVIS_NODE_VERSION}" != "0.8" ] || npm install -g npm@~1.4.0'

CHANGELOG.md

@@ -1,124 +1,139 @@
+### 0.11.4 / 2021-05-24
+
+- Prevent the client hanging if `close()` is called when already closing
+
+### 0.11.3 / 2019-06-10
+
+- Fix a race condition that caused a timeout not to be cancelled immediately
+  when the WebSocket is closed
+- Change license from MIT to Apache 2.0
+
+### 0.11.2 / 2019-06-10
+
+(This version was pulled due to an error when publishing)
+
 ### 0.11.1 / 2017-01-22
 
-* Forcibly close the I/O stream after a timeout if the peer does not respond
+- Forcibly close the I/O stream after a timeout if the peer does not respond
   after calling `close()`
 
 ### 0.11.0 / 2016-02-24
 
-* Introduce a `net` option to the `Client` class for setting things like, say, `servername`
+- Introduce a `net` option to the `Client` class for setting things like, say,
+  `servername`
 
 ### 0.10.0 / 2015-07-08
 
-* Add the standard `code` and `reason` parameters to the `close` method
+- Add the standard `code` and `reason` parameters to the `close` method
 
 ### 0.9.4 / 2015-03-08
 
-* Don't send input to the driver before `start()` is called
+- Don't send input to the driver before `start()` is called
 
 ### 0.9.3 / 2015-02-19
 
-* Make sure the TCP socket is not left open when closing the connection
+- Make sure the TCP socket is not left open when closing the connection
 
 ### 0.9.2 / 2014-12-21
 
-* Only emit `error` once, and don't emit it after `close`
+- Only emit `error` once, and don't emit it after `close`
 
 ### 0.9.1 / 2014-12-18
 
-* Check that all options to the WebSocket constructor are recognized
+- Check that all options to the WebSocket constructor are recognized
 
 ### 0.9.0 / 2014-12-13
 
-* Allow protocol extensions to be passed into websocket-extensions
+- Allow protocol extensions to be passed into websocket-extensions
 
 ### 0.8.1 / 2014-11-12
 
-* Send the correct hostname when upgrading a connection to TLS
+- Send the correct hostname when upgrading a connection to TLS
 
 ### 0.8.0 / 2014-11-08
 
-* Support connections via HTTP proxies
-* Close the connection cleanly if we're still waiting for a handshake response
+- Support connections via HTTP proxies
+- Close the connection cleanly if we're still waiting for a handshake response
 
 ### 0.7.3 / 2014-10-04
 
-* Allow sockets to be closed when they are in any state other than `CLOSED`
+- Allow sockets to be closed when they are in any state other than `CLOSED`
 
 ### 0.7.2 / 2013-12-29
 
-* Make sure the `close` event is emitted by clients on Node v0.10
+- Make sure the `close` event is emitted by clients on Node v0.10
 
 ### 0.7.1 / 2013-12-03
 
-* Support the `maxLength` websocket-driver option
-* Make the client emit `error` events on network errors
+- Support the `maxLength` websocket-driver option
+- Make the client emit `error` events on network errors
 
 ### 0.7.0 / 2013-09-09
 
-* Allow the server to send custom headers with EventSource responses
+- Allow the server to send custom headers with EventSource responses
 
 ### 0.6.1 / 2013-07-05
 
-* Add `ca` option to the client for specifying certificate authorities
-* Start the server driver asynchronously so that `onopen` handlers can be added
+- Add `ca` option to the client for specifying certificate authorities
+- Start the server driver asynchronously so that `onopen` handlers can be added
 
 ### 0.6.0 / 2013-05-12
 
-* Add support for custom headers
+- Add support for custom headers
 
 ### 0.5.0 / 2013-05-05
 
-* Extract the protocol handlers into the `websocket-driver` library
-* Support the Node streaming API
+- Extract the protocol handlers into the `websocket-driver` library
+- Support the Node streaming API
 
 ### 0.4.4 / 2013-02-14
 
-* Emit the `close` event if TCP is closed before CLOSE frame is acked
+- Emit the `close` event if TCP is closed before CLOSE frame is acked
 
 ### 0.4.3 / 2012-07-09
 
-* Add `Connection: close` to EventSource response
-* Handle situations where `request.socket` is undefined
+- Add `Connection: close` to EventSource response
+- Handle situations where `request.socket` is undefined
 
 ### 0.4.2 / 2012-04-06
 
-* Add WebSocket error code `1011`.
-* Handle URLs with no path correctly by sending `GET /`
+- Add WebSocket error code `1011`.
+- Handle URLs with no path correctly by sending `GET /`
 
 ### 0.4.1 / 2012-02-26
 
-* Treat anything other than a `Buffer` as a string when calling `send()`
+- Treat anything other than a `Buffer` as a string when calling `send()`
 
 ### 0.4.0 / 2012-02-13
 
-* Add `ping()` method to server-side `WebSocket` and `EventSource`
-* Buffer `send()` calls until the draft-76 handshake is complete
-* Fix HTTPS problems on Node 0.7
+- Add `ping()` method to server-side `WebSocket` and `EventSource`
+- Buffer `send()` calls until the draft-76 handshake is complete
+- Fix HTTPS problems on Node 0.7
 
 ### 0.3.1 / 2012-01-16
 
-* Call `setNoDelay(true)` on `net.Socket` objects to reduce latency
+- Call `setNoDelay(true)` on `net.Socket` objects to reduce latency
 
 ### 0.3.0 / 2012-01-13
 
-* Add support for `EventSource` connections
+- Add support for `EventSource` connections
 
 ### 0.2.0 / 2011-12-21
 
-* Add support for `Sec-WebSocket-Protocol` negotiation
-* Support `hixie-76` close frames and 75/76 ignored segments
-* Improve performance of HyBi parsing/framing functions
-* Decouple parsers from TCP and reduce write volume
+- Add support for `Sec-WebSocket-Protocol` negotiation
+- Support `hixie-76` close frames and 75/76 ignored segments
+- Improve performance of HyBi parsing/framing functions
+- Decouple parsers from TCP and reduce write volume
 
 ### 0.1.2 / 2011-12-05
 
-* Detect closed sockets on the server side when TCP connection breaks
-* Make `hixie-76` sockets work through HAProxy
+- Detect closed sockets on the server side when TCP connection breaks
+- Make `hixie-76` sockets work through HAProxy
 
 ### 0.1.1 / 2011-11-30
 
-* Fix `addEventListener()` interface methods
+- Fix `addEventListener()` interface methods
 
 ### 0.1.0 / 2011-11-27
 
-* Initial release, based on WebSocket components from Faye
+- Initial release, based on WebSocket components from Faye

LICENSE.md

@@ -0,0 +1,12 @@
+Copyright 2010-2021 James Coglan
+
+Licensed under the Apache License, Version 2.0 (the "License"); you may not use
+this file except in compliance with the License. You may obtain a copy of the
+License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software distributed
+under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
+CONDITIONS OF ANY KIND, either express or implied. See the License for the
+specific language governing permissions and limitations under the License.

README.md

@@ -1,10 +1,5 @@
 # faye-websocket
 
-* Travis CI build: [![Build
-  status](https://secure.travis-ci.org/faye/faye-websocket-node.svg)](http://travis-ci.org/faye/faye-websocket-node)
-* Autobahn tests: [server](http://faye.jcoglan.com/autobahn/servers/),
-  [client](http://faye.jcoglan.com/autobahn/clients/)
-
 This is a general-purpose WebSocket implementation extracted from the
 [Faye](http://faye.jcoglan.com) project. It provides classes for easily building
 WebSocket servers and clients in Node. It does not provide a server itself, but
@@ -43,11 +38,11 @@ var server = http.createServer();
 server.on('upgrade', function(request, socket, body) {
   if (WebSocket.isWebSocket(request)) {
     var ws = new WebSocket(request, socket, body);
-    
+
     ws.on('message', function(event) {
       ws.send(event.data);
     });
-    
+
     ws.on('close', function(event) {
       console.log('close', event.code, event.reason);
       ws = null;
@@ -125,8 +120,8 @@ require. Only the `origin` setting is required.
 var ws = new WebSocket.Client('ws://www.example.com/', [], {
   proxy: {
     origin:  'http://username:password@proxy.example.com',
-    headers: {'User-Agent': 'node'},
-    tls:     {cert: fs.readFileSync('client.crt')}
+    headers: { 'User-Agent': 'node' },
+    tls:     { cert: fs.readFileSync('client.crt') }
   }
 });
 ```
@@ -169,7 +164,7 @@ array of extensions to the `:extensions` option. For example, to add
 ```js
 var deflate = require('permessage-deflate');
 
-var ws = new WebSocket(request, socket, body, [], {extensions: [deflate]});
+var ws = new WebSocket(request, socket, body, [], { extensions: [deflate] });
 ```
 
 
@@ -186,53 +181,53 @@ var ws = new WebSocket.Client(url, protocols, options);
 `protocols` is an array of subprotocols as described above, or `null`.
 `options` is an optional object containing any of these fields:
 
-* `extensions` - an array of
+- `extensions` - an array of
   [websocket-extensions](https://github.com/faye/websocket-extensions-node)
   compatible extensions, as described above
-* `headers` - an object containing key-value pairs representing HTTP headers to
+- `headers` - an object containing key-value pairs representing HTTP headers to
   be sent during the handshake process
-* `maxLength` - the maximum allowed size of incoming message frames, in bytes.
+- `maxLength` - the maximum allowed size of incoming message frames, in bytes.
   The default value is `2^26 - 1`, or 1 byte short of 64 MiB.
-* `ping` - an integer that sets how often the WebSocket should send ping frames,
+- `ping` - an integer that sets how often the WebSocket should send ping frames,
   measured in seconds
 
 The client accepts some additional options:
 
-* `proxy` - settings for a proxy as described above
-* `net` - an object containing settings for the origin server that will be
+- `proxy` - settings for a proxy as described above
+- `net` - an object containing settings for the origin server that will be
   passed to
   [`net.connect()`](https://nodejs.org/api/net.html#net_socket_connect_options_connectlistener)
-* `tls` - an object containing TLS settings for the origin server, this will be
+- `tls` - an object containing TLS settings for the origin server, this will be
   passed to
   [`tls.connect()`](https://nodejs.org/api/tls.html#tls_tls_connect_options_callback)
-* `ca` - (legacy) a shorthand for passing `{tls: {ca: value}}`
+- `ca` - (legacy) a shorthand for passing `{ tls: { ca: value } }`
 
 
 ## WebSocket API
 
 Both server- and client-side `WebSocket` objects support the following API.
 
-* <b>`on('open', function(event) {})`</b> fires when the socket connection is
+- **`on('open', function(event) {})`** fires when the socket connection is
   established. Event has no attributes.
-* <b>`on('message', function(event) {})`</b> fires when the socket receives a
-  message. Event has one attribute, <b>`data`</b>, which is either a `String`
-  (for text frames) or a `Buffer` (for binary frames).
-* <b>`on('error', function(event) {})`</b> fires when there is a protocol error
-  due to bad data sent by the other peer. This event is purely informational,
-  you do not need to implement error recover.
-* <b>`on('close', function(event) {})`</b> fires when either the client or the
-  server closes the connection. Event has two optional attributes, <b>`code`</b>
-  and <b>`reason`</b>, that expose the status code and message sent by the peer
+- **`on('message', function(event) {})`** fires when the socket receives a
+  message. Event has one attribute, **`data`**, which is either a `String` (for
+  text frames) or a `Buffer` (for binary frames).
+- **`on('error', function(event) {})`** fires when there is a protocol error due
+  to bad data sent by the other peer. This event is purely informational, you do
+  not need to implement error recover.
+- **`on('close', function(event) {})`** fires when either the client or the
+  server closes the connection. Event has two optional attributes, **`code`**
+  and **`reason`**, that expose the status code and message sent by the peer
   that closed the connection.
-* <b>`send(message)`</b> accepts either a `String` or a `Buffer` and sends a
-  text or binary message over the connection to the other peer.
-* <b>`ping(message, function() {})`</b> sends a ping frame with an optional
-  message and fires the callback when a matching pong is received.
-* <b>`close(code, reason)`</b> closes the connection, sending the given status
-  code and reason text, both of which are optional.
-* <b>`version`</b> is a string containing the version of the `WebSocket`
-  protocol the connection is using.
-* <b>`protocol`</b> is a string (which may be empty) identifying the subprotocol
+- **`send(message)`** accepts either a `String` or a `Buffer` and sends a text
+  or binary message over the connection to the other peer.
+- **`ping(message, function() {})`** sends a ping frame with an optional message
+  and fires the callback when a matching pong is received.
+- **`close(code, reason)`** closes the connection, sending the given status code
+  and reason text, both of which are optional.
+- **`version`** is a string containing the version of the `WebSocket` protocol
+  the connection is using.
+- **`protocol`** is a string (which may be empty) identifying the subprotocol
   the socket is using.
 
 
@@ -254,18 +249,18 @@ server.on('request', function(request, response) {
   if (EventSource.isEventSource(request)) {
     var es = new EventSource(request, response);
     console.log('open', es.url, es.lastEventId);
-    
+
     // Periodically send messages
     var loop = setInterval(function() { es.send('Hello') }, 1000);
-    
+
     es.on('close', function() {
       clearInterval(loop);
       es = null;
     });
-  
+
   } else {
     // Normal HTTP request
-    response.writeHead(200, {'Content-Type': 'text/plain'});
+    response.writeHead(200, { 'Content-Type': 'text/plain' });
     response.end('Hello');
   }
 });
@@ -278,25 +273,25 @@ event-type is `'message'` with no ID. For example, to send a `notification`
 event with ID `99`:
 
 ```js
-es.send('Breaking News!', {event: 'notification', id: '99'});
+es.send('Breaking News!', { event: 'notification', id: '99' });
 ```
 
 The `EventSource` object exposes the following properties:
 
-* <b>`url`</b> is a string containing the URL the client used to create the
+- **`url`** is a string containing the URL the client used to create the
   EventSource.
-* <b>`lastEventId`</b> is a string containing the last event ID received by the
+- **`lastEventId`** is a string containing the last event ID received by the
   client. You can use this when the client reconnects after a dropped connection
   to determine which messages need resending.
 
 When you initialize an EventSource with ` new EventSource()`, you can pass
 configuration options after the `response` parameter. Available options are:
 
-* <b>`headers`</b> is an object containing custom headers to be set on the
+- **`headers`** is an object containing custom headers to be set on the
   EventSource response.
-* <b>`retry`</b> is a number that tells the client how long (in seconds) it
-  should wait after a dropped connection before attempting to reconnect.
-* <b>`ping`</b> is a number that tells the server how often (in seconds) to send
+- **`retry`** is a number that tells the client how long (in seconds) it should
+  wait after a dropped connection before attempting to reconnect.
+- **`ping`** is a number that tells the server how often (in seconds) to send
   'ping' packets to the client to keep the connection open, to defeat timeouts
   set by proxies. The client will ignore these messages.
 
@@ -305,7 +300,7 @@ every 15 seconds and is retryable every 10 seconds if the connection is broken:
 
 ```js
 var es = new EventSource(request, response, {
-  headers: {'Access-Control-Allow-Origin': '*'},
+  headers: { 'Access-Control-Allow-Origin': '*' },
   ping:    15,
   retry:   10
 });
@@ -314,27 +309,3 @@ var es = new EventSource(request, response, {
 You can send a ping message at any time by calling `es.ping()`. Unlike
 WebSocket, the client does not send a response to this; it is merely to send
 some data over the wire to keep the connection alive.
-
-
-## License
-
-(The MIT License)
-
-Copyright (c) 2010-2017 James Coglan
-
-Permission is hereby granted, free of charge, to any person obtaining a copy of
-this software and associated documentation files (the 'Software'), to deal in
-the Software without restriction, including without limitation the rights to
-use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
-the Software, and to permit persons to whom the Software is furnished to do so,
-subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
-FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
-COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
-IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

examples/autobahn_client.js

@@ -2,10 +2,10 @@ var WebSocket = require('..').Client,
     deflate   = require('permessage-deflate'),
     pace      = require('pace');
 
-var host    = 'ws://localhost:9001',
+var host    = 'ws://0.0.0.0:9001',
     agent   = encodeURIComponent('node-' + process.version),
     cases   = 0,
-    options = {extensions: [deflate]};
+    options = { extensions: [deflate] };
 
 var socket = new WebSocket(host + '/getCaseCount'),
     url, progress;
@@ -20,7 +20,7 @@ var runCase = function(n) {
   if (n > cases) {
     url = host + '/updateReports?agent=' + agent;
     socket = new WebSocket(url);
-    socket.onclose = process.exit;
+    socket.onclose = function() { process.exit() };
     return;
   }
 

examples/client.js

@@ -5,12 +5,12 @@ var WebSocket = require('..').Client,
 var url   = process.argv[2],
     proxy = process.argv[3],
     ca    = fs.readFileSync(__dirname + '/../spec/server.crt'),
-    tls   = {ca: ca};
+    tls   = { ca: ca };
 
 var ws = new WebSocket(url, [], {
-  proxy:      {origin: proxy, headers: {'User-Agent': 'Echo'}, tls: tls},
+  proxy:      { origin: proxy, headers: { 'User-Agent': 'Echo' }, tls: tls },
   tls:        tls,
-  headers:    {Origin: 'http://faye.jcoglan.com'},
+  headers:    { Origin: 'http://faye.jcoglan.com' },
   extensions: [deflate]
 });
 

examples/proxy_server.js

@@ -2,6 +2,6 @@ var ProxyServer = require('../spec/proxy_server');
 
 var port   = process.argv[2],
     secure = process.argv[3] === 'tls',
-    proxy  = new ProxyServer({debug: true, tls: secure});
+    proxy  = new ProxyServer({ debug: true, tls: secure });
 
 proxy.listen(port);

examples/server.js

@@ -6,7 +6,7 @@ var WebSocket = require('..'),
 
 var port    = process.argv[2] || 7000,
     secure  = process.argv[3] === 'tls',
-    options = {extensions: [deflate], ping: 5};
+    options = { extensions: [deflate], ping: 5 };
 
 var upgradeHandler = function(request, socket, head) {
   var ws = new WebSocket(request, socket, head, ['irc', 'xmpp'], options);
@@ -33,11 +33,11 @@ var requestHandler = function(request, response) {
     time += 1;
     es.send('Time: ' + time);
     setTimeout(function() {
-      if (es) es.send('Update!!', {event: 'update', id: time});
+      if (es) es.send('Update!!', { event: 'update', id: time });
     }, 1000);
   }, 2000);
 
-  fs.createReadStream(__dirname + '/haproxy.conf').pipe(es, {end: false});
+  fs.createReadStream(__dirname + '/haproxy.conf').pipe(es, { end: false });
 
   es.onclose = function() {
     clearInterval(loop);
@@ -51,7 +51,7 @@ var staticHandler = function(request, response) {
 
   fs.readFile(__dirname + path, function(err, content) {
     var status = err ? 404 : 200;
-    response.writeHead(status, {'Content-Type': 'text/html'});
+    response.writeHead(status, { 'Content-Type': 'text/html' });
     response.write(content || 'Not found');
     response.end();
   });

lib/faye/eventsource.js

@@ -1,3 +1,5 @@
+'use strict';
+
 var Stream      = require('stream').Stream,
     util        = require('util'),
     driver      = require('websocket-driver'),

lib/faye/websocket.js

@@ -4,6 +4,8 @@
 // * https://dom.spec.whatwg.org/#interface-eventtarget
 // * https://dom.spec.whatwg.org/#interface-event
 
+'use strict';
+
 var util   = require('util'),
     driver = require('websocket-driver'),
     API    = require('./websocket/api');
@@ -12,7 +14,7 @@ var WebSocket = function(request, socket, body, protocols, options) {
   options = options || {};
 
   this._stream = socket;
-  this._driver = driver.http(request, {maxLength: options.maxLength, protocols: protocols});
+  this._driver = driver.http(request, { maxLength: options.maxLength, protocols: protocols });
 
   var self = this;
   if (!this._stream || !this._stream.writable) return;

lib/faye/websocket/api.js

@@ -1,3 +1,5 @@
+'use strict';
+
 var Stream      = require('stream').Stream,
     util        = require('util'),
     driver      = require('websocket-driver'),
@@ -103,14 +105,16 @@ var instance = {
                       "The code must be either 1000, or between 3000 and 4999. " +
                       code + " is neither.");
 
+    if (this.readyState < API.CLOSING) {
+      var self = this;
+      this._closeTimer = setTimeout(function() {
+        self._beginClose('', 1006);
+      }, API.CLOSE_TIMEOUT);
+    }
+
     if (this.readyState !== API.CLOSED) this.readyState = API.CLOSING;
+
     this._driver.close(reason, code);
-
-    var self = this;
-
-    this._closeTimer = setTimeout(function() {
-      self._beginClose('', 1006);
-    }, API.CLOSE_TIMEOUT);
   },
 
   _configureStream: function() {
@@ -129,7 +133,7 @@ var instance = {
     });
   },
 
- _open: function() {
+  _open: function() {
     if (this.readyState !== API.CONNECTING) return;
 
     this.readyState = API.OPEN;
@@ -145,7 +149,7 @@ var instance = {
 
     if (this.readable) this.emit('data', data);
 
-    var event = new Event('message', {data: data});
+    var event = new Event('message', { data: data });
     event.initEvent('message', false, false);
     this.dispatchEvent(event);
   },
@@ -153,7 +157,7 @@ var instance = {
   _emitError: function(message) {
     if (this.readyState >= API.CLOSING) return;
 
-    var event = new Event('error', {message: message});
+    var event = new Event('error', { message: message });
     event.initEvent('error', false, false);
     this.dispatchEvent(event);
   },
@@ -183,7 +187,7 @@ var instance = {
     var reason = this._closeParams ? this._closeParams[0] : '',
         code   = this._closeParams ? this._closeParams[1] : 1006;
 
-    var event = new Event('close', {code: code, reason: reason});
+    var event = new Event('close', { code: code, reason: reason });
     event.initEvent('close', false, false);
     this.dispatchEvent(event);
   }

lib/faye/websocket/api/event.js

@@ -1,3 +1,5 @@
+'use strict';
+
 var Event = function(eventType, options) {
   this.type = eventType;
   for (var key in options)

lib/faye/websocket/api/event_target.js

@@ -1,3 +1,5 @@
+'use strict';
+
 var Event = require('./event');
 
 var EventTarget = {

lib/faye/websocket/client.js

@@ -1,3 +1,5 @@
+'use strict';
+
 var util   = require('util'),
     net    = require('net'),
     tls    = require('tls'),
@@ -6,14 +8,14 @@ var util   = require('util'),
     API    = require('./api'),
     Event  = require('./api/event');
 
-var DEFAULT_PORTS    = {'http:': 80, 'https:': 443, 'ws:':80, 'wss:': 443},
+var DEFAULT_PORTS    = { 'http:': 80, 'https:': 443, 'ws:':80, 'wss:': 443 },
     SECURE_PROTOCOLS = ['https:', 'wss:'];
 
 var Client = function(_url, protocols, options) {
   options = options || {};
 
   this.url     = _url;
-  this._driver = driver.client(this.url, {maxLength: options.maxLength, protocols: protocols});
+  this._driver = driver.client(this.url, { maxLength: options.maxLength, protocols: protocols });
 
   ['open', 'error'].forEach(function(event) {
     this._driver.on(event, function() {
@@ -65,12 +67,12 @@ Client.prototype._configureProxy = function(proxy, originTLS) {
     for (name in proxy.headers) this._proxy.setHeader(name, proxy.headers[name]);
   }
 
-  this._proxy.pipe(this._stream, {end: false});
+  this._proxy.pipe(this._stream, { end: false });
   this._stream.pipe(this._proxy);
 
   this._proxy.on('connect', function() {
     if (secure) {
-      var options = {socket: self._stream, servername: uri.hostname};
+      var options = { socket: self._stream, servername: uri.hostname };
       for (name in originTLS) options[name] = originTLS[name];
       self._stream = tls.connect(options);
       self._configureStream();

package.json

@@ -1,21 +1,35 @@
-{ "name"            : "faye-websocket"
-, "description"     : "Standards-compliant WebSocket server and client"
-, "homepage"        : "https://github.com/faye/faye-websocket-node"
-, "author"          : "James Coglan <jcoglan@gmail.com> (http://jcoglan.com/)"
-, "keywords"        : ["websocket", "eventsource"]
-, "license"         : "MIT"
-
-, "version"         : "0.11.1"
-, "engines"         : {"node": ">=0.8.0"}
-, "main"            : "./lib/faye/websocket"
-, "dependencies"    : {"websocket-driver": ">=0.5.1"}
-, "devDependencies" : {"jstest": "", "pace": "", "permessage-deflate": ""}
-
-, "scripts"         : {"test": "jstest spec/runner.js"}
-
-, "repository"      : { "type"  : "git"
-                      , "url"   : "git://github.com/faye/faye-websocket-node.git"
-                      }
-
-, "bugs"            : "https://github.com/faye/faye-websocket-node/issues"
+{
+          "name": "faye-websocket",
+          "description": "Standards-compliant WebSocket server and client",
+          "homepage": "https://github.com/faye/faye-websocket-node",
+          "author": "James Coglan <jcoglan@gmail.com> (http://jcoglan.com/)",
+          "keywords": [
+                    "websocket",
+                    "eventsource"
+          ],
+          "license": "Apache-2.0",
+          "version": "0.11.4",
+          "engines": {
+                    "node": ">=0.8.0"
+          },
+          "files": [
+                    "lib"
+          ],
+          "main": "./lib/faye/websocket",
+          "dependencies": {
+                    "websocket-driver": ">=0.5.1"
+          },
+          "devDependencies": {
+                    "jstest": "*",
+                    "pace": "*",
+                    "permessage-deflate": "*"
+          },
+          "scripts": {
+                    "test": "jstest spec/runner.js"
+          },
+          "repository": {
+                    "type": "git",
+                    "url": "git://github.com/faye/faye-websocket-node.git"
+          },
+          "bugs": "https://github.com/faye/faye-websocket-node/issues"
 }

spec/faye/websocket/client_spec.js

@@ -17,7 +17,7 @@ var WebSocketSteps = test.asyncSteps({
   },
 
   proxy: function(port, secure, callback) {
-    this._proxyServer = new ProxyServer({tls: secure})
+    this._proxyServer = new ProxyServer({ tls: secure })
     this._proxyServer.listen(port)
     process.nextTick(callback)
   },
@@ -157,7 +157,7 @@ test.describe("Client", function() { with(this) {
   sharedBehavior("socket client", function() { with(this) {
     it("can open a connection", function() { with(this) {
       open_socket(socket_url, protocols)
-      check_open(101, {"Upgrade": "websocket"})
+      check_open(101, { "Upgrade": "websocket" })
       check_protocol("echo")
     }})
 

spec/proxy_server.js

@@ -4,8 +4,8 @@ var fs    = require('fs'),
     net   = require('net'),
     url   = require('url');
 
-var AGENTS = {'http:': http, 'https:': https},
-    PORTS  = {'http:': 80,   'https:': 443};
+var AGENTS = { 'http:': http, 'https:': https },
+    PORTS  = { 'http:': 80,   'https:': 443 };
 
 var ProxyServer = function(options) {
   var proxy = options.tls

spec/server.crt

@@ -1,13 +1,19 @@
 -----BEGIN CERTIFICATE-----
-MIIB+TCCAWICCQDr4AAn4L7GeDANBgkqhkiG9w0BAQUFADBBMQswCQYDVQQGEwJV
-SzEPMA0GA1UECBMGTG9uZG9uMQ0wCwYDVQQKEwRGYXllMRIwEAYDVQQDEwlsb2Nh
-bGhvc3QwHhcNMTYxMjI5MTEyNTA2WhcNMTcxMjI5MTEyNTA2WjBBMQswCQYDVQQG
-EwJVSzEPMA0GA1UECBMGTG9uZG9uMQ0wCwYDVQQKEwRGYXllMRIwEAYDVQQDEwls
-b2NhbGhvc3QwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBALqXLvze/oYkelPw
-uT+eI2bkk6QDyB9h3pRW5m53F4W7rZybRT+NvzlTWU27K6XxbMA6V50hVU7evIgk
-Mh3vsFIXNFHFW0Li/hZdmgE7Tle853cxB9uVI3WtP5ju14m2knCPKVvbhsy089cb
-ptD8fO2CXm+54AsCUkAheUSVTU11AgMBAAEwDQYJKoZIhvcNAQEFBQADgYEAA9Vn
-zJ5gyhLnVdcJnvBzBvGebRvfCf91HbZdbQ+J8ySRqNr8KYc1RZg1xAmSnpc7/Uvu
-QWh2/Z/zVLnHvhtTHngSbNHX2FGBYS0Ticrvc2sV1l+MYubPfG/k6fyW0hZenY6R
-Dur664VQ7whZ+l2Nf2Gj1beM7iBNehiWu1bPpW8=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 -----END CERTIFICATE-----

spec/server.key

@@ -1,15 +1,28 @@
------BEGIN RSA PRIVATE KEY-----
-MIICXgIBAAKBgQC6ly783v6GJHpT8Lk/niNm5JOkA8gfYd6UVuZudxeFu62cm0U/
-jb85U1lNuyul8WzAOledIVVO3ryIJDId77BSFzRRxVtC4v4WXZoBO05XvOd3MQfb
-lSN1rT+Y7teJtpJwjylb24bMtPPXG6bQ/Hztgl5vueALAlJAIXlElU1NdQIDAQAB
-AoGBAKwv476bEgo8E17u4CSjDExhVxWeH8lGCZ6eats5r01MGjRQ3SB+8B44mkqv
-FOJ33kGuFTf9kLnNtfF0ZYNWs0AaDZ6c2Bfom3VtP3YzoTfZHcyHRNCt00Pp79Pt
-Gc0HSeq3SvsnJZxgtQOItEvzbaaSFETefJ2iJZrLymDlh5XBAkEA5rbb+J/r37mX
-56ZH9SG4cHhF2EIn86NgihRMMhcHWkuGDM0j0H1jaKwDkLtvGqacXpiiiUAgl0eo
-AZZ4+XnNXQJBAM8KWL4q3/IPH/hQgx8mJeefwS19LLUQsq62phuWiOiPrirvLSfK
-yokreRpOkwt1CRIeI5kauKtZ+7ycJQRv5vkCQQCfYnZGpVxTO6j4jIQrkbcUY9KE
-mvd0tkpsOaeF9yjKNWCPGW0DjIwPdL4lz4bq120xYKrwvI+HUyZ6qlQ6rO21AkEA
-nAU1COGwb24cbnjlxtRtnhXScqAwz6XssSKtHH8dXvvfiTVCNwloBWSAV2W9A9ZH
-ZqLVuqvbXC1sOh8E+koFqQJAWynSNx9Hm1zLRp9XtpE80ZBytBL/BR9We6cg0HB+
-c1cv3HhZj3gyN197k33/sok+1wY4HgxAimFhgoxamdM/zg==
------END RSA PRIVATE KEY-----
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----