This treats workInProgressRoot work and rootWithPendingPassiveEffects
the same way. Basically as long as there's some work on the root, yield
the current task. Including passive effects. This means that passive
effects are now a continuation instead of a separate callback. This can
mean they're earlier or later than before. Later for Idle in case
there's other non-React work. Earlier for same Default if there's other
Default priority work.
This makes sense since increasing priority of the passive effects beyond
Idle doesn't really make sense for an Idle render.
However, for any given render at same priority it's more important to
complete this work than start something new.
Since we special case continuations to always yield to the browser, this
has the same effect as #31784 without implementing `requestPaint`. At
least assuming nothing else calls `requestPaint`.
<img width="587" alt="Screenshot 2024-12-14 at 5 37 37 PM"
src="https://github.com/user-attachments/assets/8641b172-8842-4191-8bf0-50cbe263a30c"
/>
This flag controls the strict mode double invoke render/lifecycles/etc
behavior in Strict Mode.
The only place this flag is off is the test renderers, which it should
be on for.
If we can land this, we can follow up to remove the flag.
We introduced the `unstable_useContextWithBailout` API to run compiler
based experiments. This API was designed to be an experiment proxy for
alternative approaches which would be heavier to implement. The
experiment turned out to be inconclusive. Since most of our performance
critical usage is already optimized, we weren't able to find a clear win
with this approach.
Since we don't have further plans for this API, let's clean it up.
When scheduling the initial root and when using
`unstable_scheduleHydration` we should use the Hydration Lanes rather
than the raw update lane. This ensures that we're always hydrating using
a Hydration Lane or the Offscreen Lane rather than other lanes getting
some random hydration in it.
This fixes an issue where updating a root while it is still hydrating
causes it to trigger client rendering when it could just hydrate and
then apply the update on top of that.
It also fixes a potential performance issue where
`unstable_scheduleHydration` gets batched with an update that then ends
up forcing an update of a boundary that requires it to rewind to do the
hydration lane anyway. Might as well just start with the hydration
without the update applied first.
I added a kill switch (`enableHydrationLaneScheduling`) just in case but
seems very safe given that using `unstable_scheduleHydration` at all is
very rare and updating the root before the shell hydrates is extremely
rare (and used to trigger a recoverable error).
A long standing issue for React has been that if you reorder stateful
nodes, they may lose their state and reload. The thing moving loses its
state. There's no way to solve this in general where two stateful nodes
swap.
The [`moveBefore()`
proposal](https://chromestatus.com/feature/5135990159835136?gate=5177450351558656)
has now moved to
[intent-to-ship](https://groups.google.com/a/chromium.org/g/blink-dev/c/YE_xLH6MkRs/m/_7CD0NYMAAAJ).
This function is kind of like `insertBefore` but preserves state.
There's [a demo here](https://state-preserving-atomic-move.glitch.me/).
Ideally we'd port this demo to a fixture so we can try it.
Currently this flag is always off - even in experimental. That's because
this is still behind a Chrome flag so it's a little early to turn it on
even in experimental. So you need a custom build. It's on in RN but only
because it doesn't apply there which makes it easier to tell that it's
safe to ship once it's on everywhere else.
The other reason it's still off is because there's currently a semantic
breaking change. `moveBefore()` errors if both nodes are disconnected.
That happens if we're inside a completely disconnected React root.
That's not usually how you should use React because it means effects
can't read layout etc. However, it is currently supported. To handle
this we'd have to try/catch the `moveBefore` to handle this case but we
hope this semantic will change before it ships. Before we turn this on
in experimental we either have to wait for the implementation to not
error in the disconnected-disconnected case in Chrome or we'd have to
add try/catch.
In preparation for the next RC, I set this feature flag to true
everywhere. I did not delete the feature flag yet, in case there are yet
more bugs to be discovered.
I also didn't remove the dynamic feature flag from the Meta builds; I'll
let the Meta folks handle that.
We don't actually want the source mapped version of `.stack` from errors
because that would cause us to not be able to associate it with a source
map in the UIs that need it. The strategy in browsers is more correct
where the display is responsible for source maps.
That's why we disable any custom `prepareStackTrace` like the ones added
by `source-map`. We reset it to `undefined`.
However, when running node with `--enable-source-maps` the default for
`prepareStackTrace` which is a V8 feature (but may exist elsewhere too
like Bun) is a source mapped version of the stack. In those environments
we need to reset it to a default implementation that doesn't apply
source maps.
We already did this in Flight using the `ReactFlightStackConfigV8.js`
config. However, we need this more generally in the
`shared/ReactComponentStackFrame` implementation.
We could always set it to the default implementation instead of
`undefined` but that's unnecessary code in browser builds and it might
lead to slightly different results. For safety and code size, this PR
does it with a fork instead.
All builds specific to `node` or `edge` (or `markup` which is a server
feature) gets the default implementation where as everything else (e.g.
browsers) get `undefined` since it's expected that this is not source
mapped. We don't have to do anything about the equivalent in React
DevTools since React DevTools doesn't run on the server.
We're seeing issues with this feature internally including bugs with
sibling prerendering and errors that are difficult for developers to
action on. We'll turn off the feature for the time being until we can
improve the stability and ergonomics.
This PR does two things:
- Turn off `enableInfiniteLoopDetection` everywhere while leaving it as
a variant on www so we can do further experimentation.
- Revert https://github.com/facebook/react/pull/31061 which was a
temporary change for debugging. This brings the feature back to
baseline.
This flag will be used to gate a new timeline profiler that's integrate
with the Performance Tab and the new performance.measure extensions in
Chrome.
It replaces the existing DevTools feature so this disables
enableSchedulingProfiler when it is enabled since they can interplay in
weird ways potentially.
This means that experimental React now disable scheduling profiler and
enables this new approach.
Insertion effects do not unmount when a subtree is removed while
offscreen.
Current behavior for an insertion effect is if the component goes
- *visible -> removed:* calls insertion effect cleanup
- *visible -> offscreen -> removed:* insertion effect cleanup is never
called
This makes it so we always call insertion effect cleanup when removing
the component.
Likely also fixes https://github.com/facebook/react/issues/26670
---------
Co-authored-by: Rick Hanlon <rickhanlonii@fb.com>
## Summary
suspenseCallback feature has proved to be useful for FB Web. Let's look
at enabling the feature for the React Native build.
## How did you test this change?
Will sync the react changes with a React Native build and will verify
that performance logging is correctly notified of suspense promises
during the suspense callback.
enableHalt turns on a mode for flight prerenders where aborts are
treated like infinitely stalled outcomes while still completing the
prerender. For regular tasks we simply serialize the slot as a promise
that never settles. For ReadableStream, Blob, and Async Iterators we
just never advance the serialization so they remain unfinished when
consumed on the client.
When enableHalt is turned on aborts of prerenders will halt rather than
error. The abort reason is forwarded to the upstream produces of the
aforementioned async iterators, blobs, and ReadableStreams. In the
future if we expose a signal that you can consume from within a render
to cancel additional work the abort reason will also be forwarded there
Persistent renderers used the `Update` effect flag to check if a subtree
needs to be cloned. In some cases, that causes extra renders, such as
when a layout effect is triggered which only has an effect on the JS
side, but doesn't update the host components.
It's been a bit tricky to find the right places where this needs to be
set and I'm not 100% sure I got all the cases even though the tests
passed.
There is currently a mismatch in how the persistent mode JS API and the
Fabric native code interpret `completeRoot`.
This is a short-lived experiment to see the effect of moving the Fabric
`completeRoot` call from `finalizeContainerChildren` to
`replaceContainerChildren` which in some cases does not get called.
**This API is not intended to ship. This is a temporary unstable hook
for internal performance profiling.**
This PR exposes `unstable_useContextWithBailout`, which takes a compare
function in addition to Context. The comparison function is run to
determine if Context propagation and render should bail out earlier.
`unstable_useContextWithBailout` returns the full Context value, same as
`useContext`.
We can profile this API against `useContext` to better measure the cost
of Context value updates and gather more data around propagation and
render performance.
The bailout logic and test cases are based on
https://github.com/facebook/react/pull/20646
Additionally, this implementation allows multiple values to be compared
in one hook by returning a tuple to avoid requiring additional Context
consumer hooks.
Following https://github.com/facebook/react/pull/30436
Concurrent by default strategy has been unshipped. Here we clean up the
`allowConcurrentByDefault` path and related logic/tests.
For now, this keeps the `concurrentUpdatesByDefaultOverride` argument in
`createContainer` and `createHydrationContainer` and ignores the value
to prevent more breaking changes to `react-reconciler` in the RC stage.
Concurrent by default has been unshipped! Let's clean it up.
Here we remove `forceConcurrentByDefaultForTesting`, which allows us to
run tests against both concurrent strategies. In the next PR, we'll
remove the actual concurrent by default code path.
Sebastian Markbåge
Jack Pope
Ricky
Noah LemenandRick Hanlon
lauren
Andrew Clark
Jan Kassens
Josh Story
Benoit Girard