* Use the server src files as entry points for the builds/tests
We need one top level entry point to target two builds so we can't have
the top level one be the entry point for the builds.
* Same thing but with the modern entry point
* Clean up partial renderer entry points
I made a mistake by leaving server.browser.stable in which is the partial
renderer for the browser build of stable. That should use the legacy fizz
one.
Since the only usage of the partial renderer now is at FB and we don't use
it with Node, I removed the Node build of partial renderer too.
* Remove GC test
No code is running this path anymore. Ideally this should be ported to
a Fizz form.
This makes it a lot easier to render the whole document using React without
needing to patch into the stream.
We expect that currently people will still have to patch into the stream
to do advanced things but eventually the goal is that you shouldn't
need to.
* Wire up DOM legacy build
* Hack to filter extra comments for testing purposes
* Use string concat in renderToString
I think this might be faster. We could probably use a combination of this
technique in the stream too to lower the overhead.
* Error if we can't complete the root synchronously
Maybe this should always error but in the async forms we can just delay
the stream until it resolves so it does have some useful semantics.
In the synchronous form it's never useful though. I'm mostly adding the
error because we're testing this behavior for renderToString specifically.
* Gate memory leak tests of internals
These tests don't translate as is to the new implementation and have been
ported to the Fizz tests separately.
* Enable Fizz legacy mode in stable
* Add wrapper around the ServerFormatConfig for legacy mode
This ensures that we can inject custom overrides without negatively
affecting the new implementation.
This adds another field for static mark up for example.
* Wrap pushTextInstance to avoid emitting comments for text in static markup
* Don't emit static mark up for completed suspense boundaries
Completed and client rendered boundaries are only marked for the client
to take over.
Pending boundaries are still supported in case you stream non-hydratable
mark up.
* Wire up generateStaticMarkup to static API entry points
* Mark as renderer for stable
This shouldn't affect the FB one ideally but it's done with the same build
so let's hope this works.
This was used to implicitly hydrate if you call ReactDOM.render.
We've had a warning to explicitly use ReactDOM.hydrate(...) instead of
ReactDOM.render(...). We can now remove this from the generated markup.
(And avoid adding it to Fizz.)
This is a little strange to do now since we're trying hard to make the
root API work the same.
But if we kept it, we'd need to keep it in the generated output which adds
unnecessary bytes. It also risks people relying on it, in the Fizz world
where as this is an opportunity to create that clean state.
We could possibly only keep it in the old server rendering APIs but then
that creates an implicit dependency between which server API and which
client API that you use. Currently you can really mix and match either way.
This may not be the first root element if the root is a fragment and the
second one unsuspends first. But this tag doesn't work well for root
fragments anyway.
* Add NewContext module
This implements a reverse linked list tree containing the previous
contexts.
* Implement recursive algorithm
This algorithm pops the contexts back to a shared ancestor on the way down
the stack and then pushes new contexts in reverse order up the stack.
* Move isPrimaryRenderer to ServerFormatConfig
This is primarily intended to be used to support renderToString with a
separate build than the main one. This allows them to be nested.
* Wire up more element type matchers
* Wire up Context Provider type
* Wire up Context Consumer
* Test
* Implement reader in class
* Update error codez
* Remove redundant initial of isArray (#21163)
* Reapply prettier
* Type the isArray function with refinement support
This ensures that an argument gets refined just like it does if isArray is
used directly.
I'm not sure how to express with just a direct reference so I added a
function wrapper and confirmed that this does get inlined properly by
closure compiler.
* A few more
* Rename unit test to internal
This is not testing a bundle.
Co-authored-by: Behnam Mohammadi <itten@live.com>
* Implement DOM format config structure
* Styles
* Input warnings
* Textarea special cases
* Select special cases
* Option special cases
We read the currently selected value from the FormatContext.
* Warning for non-lower case HTML
We don't change to lower case at runtime anymore but keep the warning.
* Pre tags innerHTML needs to be prefixed
This is because if you do the equivalent on the client using innerHTML,
this is the effect you'd get.
* Extract errors
* Encode tables as a special insertion mode
The table modes are special in that its children can't be created outside
a table context so we need the segment container to be wrapped in a table.
* Move formatContext from Task to Segment
It works the same otherwise. It's just that this context needs to outlive
the task so that I can use it when writing the segment.
* Use template tag for placeholders and inserted dummy nodes with IDs
These can be used in any parent. At least outside IE11. Not sure yet what
happens in IE11 to these.
Not sure if these are bad for perf since they're special nodes.
* Add special wrappers around inserted segments depending on their insertion mode
* Allow the root namespace to be configured
This allows us to insert the correct wrappers when streaming into an
existing non-HTML tree.
* Add comment
* Add format context
* Let the Work node hold all working state for the recursive loop
Stacks are nice and all but there's a cost to maintaining each frame
both in terms of stack size usage and writing to it.
* Move current format context into work
* Synchronously render children of a Suspense boundary
We don't have to spawn work and snapshot the context. Instead we can try
to render the boundary immediately in case it works.
* Lazily create the fallback work
Instead of eagerly create the fallback work and then immediately abort it.
We can just avoid creating it if we finish synchronously.
This is needed to avoid mutating the DOM during hydration. This *always*
adds it even when it's just text children.
We need to avoid this overhead but it's a somewhat tricky problem to solve
so we defer the optimization to later.
* Report errors to a global handler
This allows you to log errors or set things like status codes.
* Add complete callback
* onReadyToStream callback
This is typically not needed because if you want to stream when the
root is ready you can just start writing immediately.
* Rename onComplete -> onCompleteAll
* Use identifierPrefix to avoid conflicts within the same response
identifierPrefix as an option exists to avoid useOpaqueIdentifier conflicting
when different renders are used within one HTML response.
This lets this be configured for the DOM renderer specifically since it's DOM
specific whether they will conflict across trees or not.
* Add test for using multiple containers in one HTML document
We added this unstable feature a few years ago, as a way to opt out of
context updates, but it didn't prove useful in practice.
We have other proposals for how to address the same problem, like
context selectors.
Since it was prefixed with `unstable_`, we should be able to remove it
without consequence. The hook API already warned if you used it.
Even if someone is using it somewhere, it's meant to be an optimization
only, so if they are using the API properly, it should not have any
semantic impact.
* Track all suspended work while it's still pending
This allows us to abort work and put everything into client rendered mode
if we don't want to wait for further I/O.
It also allows us to cancel fallbacks if we complete the main content
before the fallback.
* Expose abort API to the browser streams
Since this API already returns a value, we need to use destructuring to
expose more options.
* Add a test including the client actually client rendering it
* Use AbortSignal option for W3C streams instead of external control
* Clean up listener after it's used once
Some legacy environments can not encode non-strings. Those would specify
both as strings. They'll throw for binary data.
Some environments have to encode strings (like web streams). Those would
encode both as uint8array.
Some environments (like Node) can do either. It can be beneficial to leave
things as strings in case the native stream can do something smart with it.
* Move DOM/Native format configs to their respective packages
The streaming configs (Node/Browser) are different because they operate at
another dimension that exists in each package.
* Use escapeTextForBrowser to encode dynamic strings
We can now use local dependencies
* Remove react/unstable_cache
We're probably going to make it available via the dispatcher. Let's remove this for now.
* Add readContext() to the dispatcher
On the server, it will be per-request.
On the client, there will be some way to shadow it.
For now, I provide it on the server, and throw on the client.
* Use readContext() from react-fetch
This makes it work on the server (but not on the client until we implement it there.)
Updated the test to use Server Components. Now it passes.
* Fixture: Add fetch from a Server Component
* readCache -> getCacheForType<T>
* Add React.unstable_getCacheForType
* Add a feature flag
* Fix Flow
* Add react-suspense-test-utils and port tests
* Remove extra Map lookup
* Unroll async/await because build system
* Add some error coverage and retry
* Add unstable_getCacheForType to Flight entry
And `useDeferredValue`.
The options were already disabled in previous commits, so this doesn't
change any behavior. I upated type signatures and cleaned up the hook
implementation a bit — no longer have to wrap the `start` method with
`useCallback`, because its only remaining dependency is a `setState`
method, which never changes. Instead, we can store the `start` method
on a ref.
Now that the options in SuspenseConfig are no longer supported, the
only thing we use it for is to track whether an update is part of
a transition.
I've renamed `ReactCurrentBatchConfig.suspense` to
`ReactCurrentBatchConfig.transition`, and changed the type to a number.
The number is always either 0 or 1. I could have made it a boolean;
however, most likely this will eventually be either a Lane or an
incrementing identifier.
The `withSuspenseConfig` export still exists until we've removed
all the callers from www.
Sebastian Markbåge
Ricky
Behnam Mohammadi
Andrew Clark
Brian Vaughn
Dan Abramov