A long standing issue for React has been that if you reorder stateful
nodes, they may lose their state and reload. The thing moving loses its
state. There's no way to solve this in general where two stateful nodes
swap.
The [`moveBefore()`
proposal](https://chromestatus.com/feature/5135990159835136?gate=5177450351558656)
has now moved to
[intent-to-ship](https://groups.google.com/a/chromium.org/g/blink-dev/c/YE_xLH6MkRs/m/_7CD0NYMAAAJ).
This function is kind of like `insertBefore` but preserves state.
There's [a demo here](https://state-preserving-atomic-move.glitch.me/).
Ideally we'd port this demo to a fixture so we can try it.
Currently this flag is always off - even in experimental. That's because
this is still behind a Chrome flag so it's a little early to turn it on
even in experimental. So you need a custom build. It's on in RN but only
because it doesn't apply there which makes it easier to tell that it's
safe to ship once it's on everywhere else.
The other reason it's still off is because there's currently a semantic
breaking change. `moveBefore()` errors if both nodes are disconnected.
That happens if we're inside a completely disconnected React root.
That's not usually how you should use React because it means effects
can't read layout etc. However, it is currently supported. To handle
this we'd have to try/catch the `moveBefore` to handle this case but we
hope this semantic will change before it ships. Before we turn this on
in experimental we either have to wait for the implementation to not
error in the disconnected-disconnected case in Chrome or we'd have to
add try/catch.
In preparation for the next RC, I set this feature flag to true
everywhere. I did not delete the feature flag yet, in case there are yet
more bugs to be discovered.
I also didn't remove the dynamic feature flag from the Meta builds; I'll
let the Meta folks handle that.
We don't actually want the source mapped version of `.stack` from errors
because that would cause us to not be able to associate it with a source
map in the UIs that need it. The strategy in browsers is more correct
where the display is responsible for source maps.
That's why we disable any custom `prepareStackTrace` like the ones added
by `source-map`. We reset it to `undefined`.
However, when running node with `--enable-source-maps` the default for
`prepareStackTrace` which is a V8 feature (but may exist elsewhere too
like Bun) is a source mapped version of the stack. In those environments
we need to reset it to a default implementation that doesn't apply
source maps.
We already did this in Flight using the `ReactFlightStackConfigV8.js`
config. However, we need this more generally in the
`shared/ReactComponentStackFrame` implementation.
We could always set it to the default implementation instead of
`undefined` but that's unnecessary code in browser builds and it might
lead to slightly different results. For safety and code size, this PR
does it with a fork instead.
All builds specific to `node` or `edge` (or `markup` which is a server
feature) gets the default implementation where as everything else (e.g.
browsers) get `undefined` since it's expected that this is not source
mapped. We don't have to do anything about the equivalent in React
DevTools since React DevTools doesn't run on the server.
We're seeing issues with this feature internally including bugs with
sibling prerendering and errors that are difficult for developers to
action on. We'll turn off the feature for the time being until we can
improve the stability and ergonomics.
This PR does two things:
- Turn off `enableInfiniteLoopDetection` everywhere while leaving it as
a variant on www so we can do further experimentation.
- Revert https://github.com/facebook/react/pull/31061 which was a
temporary change for debugging. This brings the feature back to
baseline.
This flag will be used to gate a new timeline profiler that's integrate
with the Performance Tab and the new performance.measure extensions in
Chrome.
It replaces the existing DevTools feature so this disables
enableSchedulingProfiler when it is enabled since they can interplay in
weird ways potentially.
This means that experimental React now disable scheduling profiler and
enables this new approach.
Insertion effects do not unmount when a subtree is removed while
offscreen.
Current behavior for an insertion effect is if the component goes
- *visible -> removed:* calls insertion effect cleanup
- *visible -> offscreen -> removed:* insertion effect cleanup is never
called
This makes it so we always call insertion effect cleanup when removing
the component.
Likely also fixes https://github.com/facebook/react/issues/26670
---------
Co-authored-by: Rick Hanlon <rickhanlonii@fb.com>
## Summary
suspenseCallback feature has proved to be useful for FB Web. Let's look
at enabling the feature for the React Native build.
## How did you test this change?
Will sync the react changes with a React Native build and will verify
that performance logging is correctly notified of suspense promises
during the suspense callback.
enableHalt turns on a mode for flight prerenders where aborts are
treated like infinitely stalled outcomes while still completing the
prerender. For regular tasks we simply serialize the slot as a promise
that never settles. For ReadableStream, Blob, and Async Iterators we
just never advance the serialization so they remain unfinished when
consumed on the client.
When enableHalt is turned on aborts of prerenders will halt rather than
error. The abort reason is forwarded to the upstream produces of the
aforementioned async iterators, blobs, and ReadableStreams. In the
future if we expose a signal that you can consume from within a render
to cancel additional work the abort reason will also be forwarded there
Persistent renderers used the `Update` effect flag to check if a subtree
needs to be cloned. In some cases, that causes extra renders, such as
when a layout effect is triggered which only has an effect on the JS
side, but doesn't update the host components.
It's been a bit tricky to find the right places where this needs to be
set and I'm not 100% sure I got all the cases even though the tests
passed.
There is currently a mismatch in how the persistent mode JS API and the
Fabric native code interpret `completeRoot`.
This is a short-lived experiment to see the effect of moving the Fabric
`completeRoot` call from `finalizeContainerChildren` to
`replaceContainerChildren` which in some cases does not get called.
**This API is not intended to ship. This is a temporary unstable hook
for internal performance profiling.**
This PR exposes `unstable_useContextWithBailout`, which takes a compare
function in addition to Context. The comparison function is run to
determine if Context propagation and render should bail out earlier.
`unstable_useContextWithBailout` returns the full Context value, same as
`useContext`.
We can profile this API against `useContext` to better measure the cost
of Context value updates and gather more data around propagation and
render performance.
The bailout logic and test cases are based on
https://github.com/facebook/react/pull/20646
Additionally, this implementation allows multiple values to be compared
in one hook by returning a tuple to avoid requiring additional Context
consumer hooks.
Following https://github.com/facebook/react/pull/30436
Concurrent by default strategy has been unshipped. Here we clean up the
`allowConcurrentByDefault` path and related logic/tests.
For now, this keeps the `concurrentUpdatesByDefaultOverride` argument in
`createContainer` and `createHydrationContainer` and ignores the value
to prevent more breaking changes to `react-reconciler` in the RC stage.
Concurrent by default has been unshipped! Let's clean it up.
Here we remove `forceConcurrentByDefaultForTesting`, which allows us to
run tests against both concurrent strategies. In the next PR, we'll
remove the actual concurrent by default code path.
React transpiles some of its own `console.error` calls into a helper
that appends component stacks to those calls. However, this doesn't
cover user space `console.error` calls - which includes React helpers
that React has moved into third parties like createClass and prop-types.
The idea is that any user space component can add a warning just like
React can which is why React DevTools adds them too if they don't
already exist. Having them appended in both places is tricky because now
you have to know whether to remove them from React's logs.
Similarly it's often common for server-side frameworks to forget to
cover the `console.error` logs from other sources since React DevTools
isn't active there. However, it's also annoying to get component stacks
clogging the terminal - depending on where the log came from.
In the future `console.createTask()` will cover this use case natively
and when available we don't append them at all.
The new strategy relies on either:
- React DevTools existing to add them to React logs as well as third
parties.
- `console.createTask` being supported and surfaced.
- A third party framework showing the component stack either in an Error
Dialog or appended to terminal output.
For a third party to be able to implement this they need to be able to
get the component stack. To get the component stack from within a
`console.error` call you need to use the `React.captureOwnerStack()`
helper which is only available in `enableOwnerStacks` flag. However,
it's possible to polyfill with parent stacks using internals as a stop
gap. There's a question of whether React 19 should just go out with
`enableOwnerStacks` to expose this but regardless I think it's best it
doesn't include component stacks from the runtime for consistency.
In practice it's not really a regression though because typically either
of the other options exists and error dialogs don't implement
`console.error` overrides anyway yet. SSR terminals might miss them but
they'd only have them in DEV warnings to begin with an a subset of React
warnings. Typically those are either going to happen on the client
anyway or replayed.
Our tests are written to assert that component stacks work in various
scenarios all over the place. To ensure that this keeps working I
implement a "polyfill" that is similar to that expected a server
framework might do - in `assertConsoleErrorDev` and `toErrorDev`.
This PR doesn't yet change www or RN since they have their own forks of
consoleWithStackDev for now.
In www, the experimental versions get a .modern.js or .classic.js prefix
and get copied into the same folder. In RN, they don't seem to have
.modern.js and .classic.js versions so they end up getting the same
name.
sebmarkbage's theory is that what happens is that they then override
the file that was already there. So depending on if experimental or
stable build finishes first you get a different version at the end.
It doesn't make sense to use `__EXPERIMENTAL__` for flags in native-fb
since there's no modern/classic split there. So that flag should just be
hardcoded to true or false and then it doesn't matter which one finishes
first.
We don't support experimental builds in OSS RN neither so the same thing
could happen with
[`enableOwnerStacks`](https://github.com/facebook/react/blob/5dcf3ca8d45a276a8b4cee0cedd234967661ca35/packages/shared/forks/ReactFeatureFlags.native-oss.js#L60).
You can see that the build errors in the previous PR but passes after
these flag changes.
ghstack-source-id: d10f37bcea
Pull Request resolved: https://github.com/facebook/react/pull/30322
The full stack is the current execution stack (`new Error().stack`) +
the current owner stack (`React.captureOwnerStack()`).
The idea with the top frame was that when we append it to console.error
we'd include both since otherwise the true reason would be obscured
behind the little `>` to expand. So we'd just put both stack front and
center. By adding this into getCurrentStack it was easy to use the same
filtering. I never implemented in Fizz or Flight though.
However, with the public API `React.captureOwnerStack()` it's not
necessary to include the current stack since you already have it and
you'd have filtering capabilities in user space too.
Since I'm removing the component stacks from React itself we no longer
need this. It's expected that maybe RDT or framework polyfill would
include this same technique though.
While the goal is to remove legacy context completely, I think we can
already land the removal of legacy context for function components. I
didn't even know this feature existed until reading the code recently.
The win is just a couple of property lookups on function renders, but it
trims down the API already as the full removal will likely still take a
bit more time.
www: Starting with enabled test renderer and a feature flag for
production rollout.
RN: Not enabled, will follow up on this.
Object literals should be faster at least on React Native with Hermes as
the JS engine.
It might also be interesting to confirm the old comments in this file
from years ago are even still valid. Creating an object from a literal
should be a simpler operation.
It's a bit unfortunate that this introduces a bunch of copied code, but
since we rearely update the fields on fibers, this seems like an okay
tradeoff for a hot code path. An alternative would be some sort of macro
system, but that doesn't seem worth the extra complexity.
We're removing this wrapper from the mainline but RN is still using
component stacks to filter out warnings.
This is unfortunate since it'll be hard to keep track of the interplay
with these, DevTools and how you're supposed to implement error dialogs
in userspace.
## Summary
Configures the React Native open source feature flags in preparation for
React Native 0.75, which will be upgraded to React 19.
## How did you test this change?
```
$ yarn test
$ yarn flow fabric
```
## Summary
We currently do deep diffing for object props, and also use custom
differs, if they are defined, for props with custom attribute config.
The idea is to simply do a `===` comparison instead of all that work. We
will do less computation on the JS side, but send more data to native.
The hypothesis is that this change should be neutral in terms of
performance. If that's the case, we'll be able to get rid of custom
differs, and be one step closer to deleting view configs.
This PR adds the `enableShallowPropDiffing` feature flag to support this
experiment.
## How did you test this change?
With `enableShallowPropDiffing` hardcoded to `true`:
```
yarn test packages/react-native-renderer
```
This fails on the following test cases:
- should use the diff attribute
- should do deep diffs of Objects by default
- should skip deeply-nested changed functions
Which makes sense with this change. These test cases should be deleted
if the experiment is shipped.
This information is available in the regular stack but since that's
hidden behind an expando and our appended stack to logs is not hidden,
it hides the most important frames like the name of the current
component.
This is closer to what happens to the native stack.
We only include stacks if they're within a ReactFiberCallUserSpace call
frame. This should be most that have a current fiber but this is
critical to filtering out most React frames if the regular node_modules
filter doesn't work.
Most React warnings fire during the rendering phase and not inside a
user space function but some do like hooks warnings and setState in
render. This feature is more important if we port this to React DevTools
appending stacks to all logs where it's likely to originate from inside
a component and you want the line within that component to immediately
part of the visible stack.
One thing that kind sucks is that we don't have a reliable way to
exclude React internal stack frames. We filter node_modules but it might
not match. For other cases I try hard to only track the stack frame at
the root of React (e.g. immediately inside createElement) until the
ReactFiberCallUserSpace so we don't need the filtering to work. In this
case it's hard to achieve the same thing though. This is easier in RDT
because we have the start/end line and parsing of stack traces so we can
use that to exclude internals but that's a lot of code/complexity for
shipping within the library.
For example in Safari:
<img width="590" alt="Screenshot 2024-05-31 at 6 15 27 PM"
src="https://github.com/facebook/react/assets/63648/2820c8c0-8a03-42e9-8678-8348f66b051a">
Ideally warnOnUseFormStateInDev and useFormState wouldn't be included
since they're React internals. Before this change, the Counter.js line
also wasn't included though which points to exactly where the error is
within the user code.
(Note Server Components have V8 formatted lines and Client Components
have JSC formatted lines.)