This PR:
Adds a transform-react-version-pragma that transforms // @reactVersion SEMVER_VERSION into _test_react_version(...) and _test_react_version_focus(...) that lets us only run a test if it satisfies the right react version.
Adds _test_react_version and _test_react_version_focus to the devtools setupEnv file
Add a devtools preprocessor file for devtools specific plugins
* Support Document as a container for hydration and rendering
Previously Document was not handled effectively as a container. in particual when hydrating if there was a fallback to client rendering React would attempt to append a new <html> element into the document before clearing out the existing one which errored leaving the application in brokent state.
The initial approach I took was to recycle the documentElement and never remove or append it, always just moving it to the right fiber and appending the right children (heady/body) as needed. However in testing a simple approach in modern browsers it seems like treating the documentElement like any other element works fine. This change modifies the clearContainer method to remove the documentElement if the container is a DOCUMENT_NODE. Once the container is cleared React can append a new documentElement via normal means.
* Allow Document as container for createRoot
previously rendering into Document was broken and only hydration worked because React did not properly deal with the documentElement and would error in a broken state if used that way. With the previous commit addressing this limitation this change re-adds Document as a valid container for createRoot.
It should be noted that if you use document with createRoot it will drop anything a 3rd party scripts adds the page before rendering for the first time.
When we delete fibers, we will call onCommitFiberUnmount on every deleted fiber to also remove them from the element tree. However, there are some cases where fibers aren't deleted but we still want to remove them from the element tree (ex. offscreen). In the second case, we recursively remove these children during handleCommitFiberRoot.
When we remove an element, we will untrack its corresponding fiber ID. However, because of fast refresh, we don't do this immediately, opting to instead add the value to a set to process later. However, before the set has been processed, we unmount that fiber again, we will get duplicate unmounts.
To fix this, handleCommitFiberRoot explicitly flushes all the fibers in the set before starting the deletion process. We also need to do this in handleCommitFiberUnmount in case handleCommitFiberRoot gets called first.
Resolves#24428
---
For fiber types that render user code, we check the PerformedWork flag rather than the props, ref, and state to see if the fiber rendered (rather than bailing out/etc.) so we know whether we need to do things like record profile durations. ForwardRef wasn't added to this list, which caused #24428.
The previous regex to detect string substitutions is not quite right, this PR fixes it by:
Check to make sure we are starting either at the beginning of the line or we match a character that's not % to make sure we capture all the % in a row.
Make sure there are an odd number of % (the first X pairs are escaped % characters. The odd % followed by a letter is the string substitution)
When hydrating a suspense boundary an error or a suspending fiber can often lead to a cascade of hydration errors. While in many cases these errors are simply discarded (e.g. when teh root does not commit and we fall back to client rendering) the use of invokeGuardedCallback can lead to many of these errors appearing as uncaught in the browser console. This change avoids error replaying using invokeGuardedCallback when we are hydrating a suspense boundary and have either already suspended or we have one previous error which was replayed.
The `version` field exported by the React package currently corresponds
to the `@next` release for that build. This updates the build script
to output the same version that is used in the package.json file.
It works by doing a find-and-replace of the React version after the
build has completed. This is a bit weird but it saves us from having
to build the `@next` and `@latest` releases separately; they are
identical except for the version numbers.
We don't have strong guarantees that the props object is referentially
equal during updates where we can't bail out anyway — like if the props
are shallowly equal, but there's a local state or context update in the
same batch.
However, as a principle, we should aim to make the behavior consistent
across different ways of memoizing a component. For example, React.memo
has a different internal Fiber layout if you pass a normal function
component (SimpleMemoComponent) versus if you pass a different type like
forwardRef (MemoComponent). But this is an implementation detail.
Wrapping a component in forwardRef (or React.lazy, etc) shouldn't affect
whether the props object is reused during a bailout.
Co-authored-by: Mateusz Burzyński <mateuszburzynski@gmail.com>
During an urgent update, useDeferredValue should reuse the previous
value. The regression test I added shows that it was reverting to
the initial value instead.
The cause of the bug was trivial: the update path doesn't update the
hook's `memoizedState` field. Only the mount path.
None of the existing tests happened to catch this because to trigger the
bug, you have to do an urgent update that isn't the first update after
initial render. In all of the existing tests that included an urgent
update, it was the first update, so the "previous" value and the initial
value happened to be the same thing.
* Add failing test case for #24384
If a components suspends during hydration we expect there to be mismatches with server rendered HTML but we were not always supressing warning messages related to these expected mismatches
* Mark hydration as suspending on every thrownException
previously hydration would only be marked as supsending when a genuine error was thrown. This created an opportunity for a hydration mismatch that would warn after which later hydration mismatches would not lead to warnings. By moving the marker check earlier in the thrownException function we get the hydration context to enter the didSuspend state on both error and thrown promise cases which eliminates this gap.
* Fix failing test related to client render fallbacks
This test was actually subject to the project identified in the issue fixed in this branch. After fixing the underlying issue the assertion logic needed to change to pick the right warning which now emits after hydration successfully completes on promise resolution. I changed the container type to 'section' to make the error message slightly easier to read/understand (for me)
* Only mark didSuspend on suspense path
For unknown reasons the didSuspend was being set only on the error path and nto the suspense path. The original change hoisted this to happen on both paths. This change moves the didSuspend call to the suspense path only. This appears to be a noop because if the error path marked didSuspend it would suppress later warnings but if it does not the warning functions themsevles do that suppression (after the first one which necessarily already happened)
* gate test on hydration fallback flags
* refactor didSuspend to didSuspendOrError
the orignial behavior applied the hydration warning bailout to error paths only. originally I moved it to Suspense paths only but this commit restores it to both paths and renames the marker function as didThrow rather than didSuspend
The logic here is that for either case if we get a mismatch in hydration we want to warm up components but effectively consider the hydration for this boundary halted
* factor tests to assert different behavior between prod and dev
* add DEV suffix to didSuspendOrError to better indicate this feature should only affect dev behavior
* move tests back to ReactDOMFizzServer-test
* fix comment casing
* drop extra flag gates in tests
* add test for user error case
* remove unnecessary gate
* Make test better
it now has an intentional client mismatch that would error if there wasn't suppression brought about by the earlier error. when it client renders it has the updated value not found in the server response but we do not see a hydration warning because it was superseded by the thrown error in that render
* Bug: Missing unmount when suspended tree deleted
When a suspended tree switches to a fallback, we unmount the effects.
If the suspended tree is then deleted, there's a guard to prevent us
from unmounting the effects again.
However, in legacy mode, we don't unmount effects when a tree suspends.
So if the suspended tree is then deleted, we do need to unmount
the effects.
We're missing a check for legacy/concurrent mode.
* Fix: Unmount suspended tree when it is deleted
The previous escape was for Text into HTML and breaks script contents. The new escaping ensures that the script contents cannot prematurely close the host script tag by escaping script open and close string sequences using a unicode escape substitution.
Fixes#24302 based on #24306.
---
The current implementation for strict mode double logging stringiness and dims the second log. However, because we stringify everything, including objects, this causes objects to be logged as `[object Object]` etc.
This PR creates a new function that formats console log arguments with a specified style. It does this by:
1. The first param is a string that contains %c: Bail out and return the args without modifying the styles. We don't want to affect styles that the developer deliberately set.
2. The first param is a string that doesn't contain %c but contains string formatting: `[`%c${args[0]}`, style, ...args.slice(1)]` Note: we assume that the string formatting that the developer uses is correct.
3. The first param is a string that doesn't contain string formatting OR is not a string: Create a formatting string where:
- boolean, string, symbol -> %s
- number -> %f OR %i depending on if it's an int or float
- default -> %o
---
Co-authored-by: Billy Janitsch <billy@kensho.com>
The shell package wasn't compiling because yarn build-for-devtools was incorrect. The react-dom/test package was renamed to react-dom/unstable_testing. This PR fixes this in the package.json.
Note: Adding packages to the yarn build-for-devtools command isn't great in the long run. Eventually we should make devtools have its own build script.
I changed the type of this functions returned value but forgot to change
the check.
It happens to work before anyway, because eventually the interleaved
updates will get transferred at the beginning of the next render phase.
But this is more logically consistent.
* Regression test: Interleaved update race condition
Demonstrates the bug reported in #24350.
* Bugfix: Last update wins, even if interleaved
"Interleaved" updates are updates that are scheduled while a render is
already in progress. We put these on a special queue so that they don't
get processed during the current render. Then we transfer them to
the "real" queue after the render has finished.
There was a race condition where an update is received after the render
has finished but before the interleaved update queue had been
transferred, causing the updates to be queued in the wrong order.
The fix I chose is to check if the interleaved updates queue is empty
before adding any update to the real queue. If it's not empty, then
the new update must also be treated as interleaved.
Adds an Offscreen Queue. We use the offscreen queue to store not yet processed transitions. During the commit phase, we will add these transitions to the transitions field in memoizedState (in the subsequent PR) and clear the transitions field in the updateQueue
danandGitHub
RickyandGitHub
Mengdi "Monday" ChenandGitHub
Luna RuanandGitHub
Josh StoryandGitHub
Timothy YungandGitHub
Brian VaughnandGitHub
Sebastian MarkbågeandGitHub
Andrew ClarkandGitHub
Michael サイトー 中村 BashurovandGitHub
Billy JanitschandGitHub
