* Bugfix: Expiring a partially completed tree (#17926)
* Failing test: Expiring a partially completed tree
We should not throw out a partially completed tree if it expires in the
middle of rendering. We should finish the rest of the tree without
yielding, then finish any remaining expired levels in a single batch.
* Check if there's a partial tree before restarting
If a partial render expires, we should stay in the concurrent path
(performConcurrentWorkOnRoot); we'll stop yielding, but the rest of the
behavior remains the same.
We will only revert to the sync path (performSyncWorkOnRoot) when
starting on a new level.
This approach prevents partially completed concurrent work from
being discarded.
* New test: retry after error during expired render
* Regression: Expired partial tree infinite loops
Adds regression tests that reproduce a scenario where a partially
completed tree expired then fell into an infinite loop.
The code change that exposed this bug made the assumption that if you
call Scheduler's `shouldYield` from inside an expired task, Scheduler
will always return `false`. But in fact, Scheduler sometimes returns
`true` in that scenario, which is a bug.
The reason it worked before is that once a task timed out, React would
always switch to a synchronous work loop without checking `shouldYield`.
My rationale for relying on `shouldYield` was to unify the code paths
between a partially concurrent render (i.e. expires midway through) and
a fully concurrent render, as opposed to a render that was synchronous
the whole time. However, this bug indicates that we need a stronger
guarantee within React for when tasks expire, given that the failure
case is so catastrophic. Instead of relying on the result of a dynamic
method call, we should use control flow to guarantee that the work is
synchronously executed.
(We should also fix the Scheduler bug so that `shouldYield` always
returns false inside an expired task, but I'll address that separately.)
* Always switch to sync work loop when task expires
Refactors the `didTimeout` check so that it always switches to the
synchronous work loop, like it did before the regression.
This breaks the error handling behavior that I added in 5f7361f (an
error during a partially concurrent render should retry once,
synchronously). I'll fix this next. I need to change that behavior,
anyway, to support retries that occur as a result of `flushSync`.
* Retry once after error even for sync renders
Except in legacy mode.
This is to support the `useOpaqueReference` hook, which uses an error
to trigger a retry at lower priority.
* Move partial tree check to performSyncWorkOnRoot
* Factor out render phase
Splits the work loop and its surrounding enter/exit code into their own
functions. Now we can do perform multiple render phase passes within a
single call to performConcurrentWorkOnRoot or performSyncWorkOnRoot.
This lets us get rid of the `didError` field.
* Added missing @flow pragma to React.js
* Fixed useContext() return type definition
* Fixed previously masked Flow errors in DevTools and react-interactions packages
* Added displayName to internal Context Flow type
* Removed Flow generic annotations for createResponder
This seems to cause a parsing error. (Not sure why.) The API is deprecated anyway so I'm being lazy for now and just adding a .
* Only use Rollup's CommonJS plugin for "react-art"
We still need it for the "art" UMD builds but nothing else should have
CommonJS dependencies anymore.
* react-debug-tools and jest-react should leave object-assign as an external dep
This avoids it being compiled into the output.
* Check in a forked version of object-assign
This one uses ES modules so that we can inline it into UMD builds.
We could wait for object-assign to make an ESM export but we're going to
remove this dependency and assume global polyfills in the next version
anyway. However, we'd have to figure out how to keep the copyright header
and it'll get counted in terms of byte size (even if other tooling removes
it).
A lot of headache when we have our own implementation anyway. So I'll just
use that.
Ours is not resilient to checking certain browser bugs but those browsers
are mostly unused anyway. (Even FB breaks on them presumably.)
We also don't need to be resilient to Symbols since the way React uses it
we shouldn't need to copy symbols
* Don't transpile Object.assign to object-assign in object-assign
The polyfill needs to be able to feature detect Object.assign.
* improve findByType error message
* fix flow typing
* Adding a test for the "Unknown" branch when `getComponentName()` returns a falsy value. The error message in this case not the most descriptive but seems consistent with the `getComponentName(type) || 'Unknown'` pattern seen in multiple places in this code base.
* Move remaining things to named exports
The interesting case here is the noop renderers. The wrappers around the
reconciler now changed to use a local export that gets mutated.
ReactNoop and ReactNoopPersistent now have to destructure the object to
list out the names it's going to export. We should probably refactor
ReactNoop away from createReactNoop. Especially since it's also not Flow
typed.
* Switch interactions to star exports
This will have esModule compatibility flag on them. They should ideally
export default instead.
Nothing interesting here except that ReactShallowRenderer currently exports
a class with a static method instead of an object.
I think the public API is probably just meant to be createRenderer but
currently the whole class is exposed. So this means that we have to keep
it as default export. We could potentially also expose a named export for
createRenderer but that's going to cause compatibility issues.
So I'm just going to make that export default.
Unfortunately Rollup and Babel (which powers Jest) disagree on how to
import this. So to make it work I had to move the jest tests to imports.
This doesn't work with module resetting. Some tests weren't doing that
anyway and the rest is just testing ReactShallowRenderer so meh.
The useState hook has always composed the useReducer hook. 1:1 composition like this is fine.
But some more recent hooks (e.g. useTransition, useDeferredValue) compose multiple hooks internally. This breaks react-debug-tools because it causes off-by-N errors when the debug tools re-renders the function.
For example, if a component were to use the useTransition and useMemo hooks, the normal hooks dispatcher would create a list of first state, then callback, then memo hooks, but the debug tools package would expect a list of transition then memo. This can break user code and cause runtime errors in both the react-debug-tools package and in product code.
This PR fixes the currently broken hooks by updating debug tools to be aware of the composite hooks (how many times it should call nextHook essentially) and adds tests to make sure they don't get out of sync again. We'll need to add similar tests for future composite hooks (like useMutableSource #18000).
The testing build versions of react-dom are included in the builds right now, but we're not ready to share them yet. This PR removes them for now (back soon for the next release)
We're not actually building this entry point. I can't think of a reason
we'd need to fork the isomorphic one. We don't really fork it for
anything since it's so generic to work with all renderers.
Since /profiling doesn't have this, it might confuse the story if we made
people alias two things for testing but not profiling.
* Add options for forked entry points
We currently fork .fb.js entry points. This adds a few more options.
.modern.fb.js - experimental FB builds
.classic.fb.js - stable FB builds
.fb.js - if no other FB build, use this for FB builds
.experimental.js - experimental builds
.stable.js - stable builds
.js - used if no other override exists
This will be used to have different ES exports for different builds.
* Switch React to named exports
* Export named exports from the export point itself
We need to re-export the Flow exported types so we can use them in our code.
We don't want to use the Flow types from upstream since it doesn't have the non-public APIs that we have.
This should be able to use export * but I don't know why it doesn't work.
This actually enables Flow typing of React which was just "any" before.
This exposed some Flow errors that needs fixing.
* Create forks for the react entrypoint
None of our builds expose all exports and they all differ in at least one
way, so we need four forks.
* Set esModule flag to false
We don't want to emit the esModule compatibility flag on our CommonJS
output. For now we treat our named exports as if they're CommonJS.
This is a potentially breaking change for scheduler (but all those apis
are unstable), react-is and use-subscription. However, it seems unlikely
that anyone would rely on this since these only have named exports.
* Remove unused Feature Flags
* Let jest observe the stable fork for stable tests
This lets it do the negative test by ensuring that the right tests fail.
However, this in turn will make other tests that are not behind
__EXPERIMENTAL__ fail. So I need to do that next.
* Put all tests that depend on exports behind __EXPERIMENTAL__
Since there's no way to override the exports using feature flags
in .intern.js anymore we can't use these APIs in stable.
The tradeoff here is that we can either enable the negative tests on
"stable" that means experimental are expected to fail, or we can disable
tests on stable. This is unfortunate since some of these APIs now run on
a "stable" config at FB instead of the experimental.
* Switch ReactDOM to named exports
Same strategy as React.
I moved the ReactDOMFB runtime injection to classic.fb.js
Since we only fork the entrypoint, the `/testing` entrypoint needs to
be forked too to re-export the same things plus `act`. This is a bit
unfortunate. If it becomes a pattern we can consider forking in the
module resolution deeply.
fix flow
* Fix ReactDOM Flow Types
Now that ReactDOM is Flow type checked we need to fix up its types.
* Configure jest to use stable entry for ReactDOM in non-experimental
* Remove additional FeatureFlags that are no longer needed
These are only flagging the exports and no implementation details so we
can control them fully through the export overrides.
* [eslint-plugin-react-hooks] Fix cyclic caching for loops containing a condition
* [eslint-plugin-react-hooks] prettier write
* [eslint-plugin-react-hooks] Fix set for tests
* Update packages/eslint-plugin-react-hooks/src/RulesOfHooks.js
Co-Authored-By: Luke Kang <kidkkr@icloud.com>
Co-authored-by: Luke Kang <kidkkr@icloud.com>
* Test automation for edge dev tools extension
* Linter changes
* Load extension automatically.
* Fixed path in `test` command
Co-authored-by: Brian Vaughn <brian.david.vaughn@gmail.com>
Exports from ReactDOM represents React's public API. This include types
exported by React. At some point we'll start building Flow types from
these files.
The duplicate name between DOMContainer and Container seems confusing too
since it was used in the same files even though they're the same.
* import * as React from "react";
This is the correct way to import React from an ES module since the ES
module will not have a default export. Only named exports.
* import * as ReactDOM from "react-dom"
I recently landed a change to the timing of passive effect cleanup functions during unmount (see #17925). This change defers flushing of passive effects for unmounted components until later (whenever we next flush pending passive effects).
Since this change increases the likelihood of a (not actionable) state update warning for unmounted components, I've suppressed that warning for Fibers that have scheduled passive effect unmounts pending.
Andrew ClarkandGitHub
Brian VaughnandGitHub
Dominic GannawayandGitHub
Luna RuanandGitHub
Sebastian MarkbågeandGitHub
Minh NguyenandGitHub
Eli WhiteandGitHub
Henry Q. DineenandGitHub
Dan AbramovandGitHub
Sophie AlpertandGitHub
Simen BekkhusandGitHub
Sunil PaiandGitHub
Steve HarrisonandGitHub
adasqandGitHub