In
https://github.com/facebook/react/pull/26573/commits/2019ddc75f448292ffa6429d7625514af192631b,
we changed to set .defaultValue before .value on updates. In some cases,
setting .defaultValue causes .value to change, and since we only set
.value if it has the wrong value, this resulted in us not assigning to
.value, which resulted in inputValueTracking not knowing the right
value. See new test added.
My fix here is to (a) move the value setting back up first and (b)
narrowing the fix in the aforementioned PR to newly remove the value
attribute only if it defaultValue was previously present in props.
The second half is necessary because for types where the value property
and attribute are indelibly linked (hidden checkbox radio submit image
reset button, i.e. spec modes default or default/on from
https://html.spec.whatwg.org/multipage/input.html#dom-input-value-default),
we can't remove the value attribute after setting .value, because that
will undo the assignment we just did! That is, not having (b) makes all
of those types fail to handle updating props.value.
This code is incredibly hard to think about but I think this is right
(or at least, as right as the old code was) because we set .value here
only if the nextProps.value != null, and we now remove defaultValue only
if lastProps.defaultValue != null. These can't happen at the same time
because we have long warned if value and defaultValue are simultaneously
specified, and also if a component switches between controlled and
uncontrolled.
Also, it fixes the test in https://github.com/facebook/react/pull/26626.
In the extension, currently we do the following:
1. check whether there's at least one React renderer on the page
2. if yes, load the backend to the page
3. initialize the backend
To support multiple versions of backends, we are changing it to:
1. check the versions of React renders on the page
2. load corresponding React DevTools backends that are shipped with the
extension; if they are not contained (usually prod builds of
prereleases), show a UI to allow users to load them from UI
3. initialize each of the backends
To enable this workflow, a backend will ignore React renderers that does
not match its version
This PR adds a new file "backendManager" in the extension for this
purpose.
------
I've tested it on Chrome, Edge and Firefox extensions
Updates our Babel plugin to add an import to React if we succesfully compiled a
function and cached one or more values. For now this logic is entirely in the
Babel plugin itself, but long term we should move this into codegen and teach
Forget to start the pipeline by lowering the whole Program node to an HIR (which
would also allow us to understand imports and other module scope values being
used). Right now it's not possible to add in codegen (without some ugly code) as
a file containing multiple components would result in duplicate imports being
generated
Previously useMemo inlining created a new StoreLocal assignment (not
reassignment!) instruction for every return value. This breaks when the return
is inside a block (like an if-block) as the scope is tied to the block.
For example: ``` let x = useMemo(() => { if (...) { return { ... }; } })
``` would become: ``` if (...) { const temp = { ... }; } const x = temp; ```
This PR instead changes the inlining to declare a temporary in the function
prologue and then reassign values to it when replacing return statements.
``` let x = useMemo(() => { if (...) { return { ... }; } }) ```
becomes
``` let temp; if (...) { temp = { ... }; } const x = temp; ```
This lets the client bundle encode Server References without them first
being passed from an RSC payload. Like if you just import `"use server"`
from the client. A bundler could already emit these proxies to be called
on the client but the subtle difference is that those proxies couldn't
be passed back into the server by reference. They have to be registered
with React.
We don't currently implement importing `"use server"` from client
components in the reference implementation. It'd need to expand the
Webpack plugin with a loader that rewrites files with the `"use server"`
in the client bundle.
```
"use server";
export async function action() {
...
}
```
->
```
import {createServerReference} from "react-server-dom-webpack/client";
import {callServer} from "some-router/call-server";
export const action = createServerReference('1234#action', callServer);
```
The technique I use here is that the compiled output has to call
`createServerReference(id, callServer)` with the `$$id` and proxy
implementation. We then return a proxy function that is registered with
a WeakMap to the particular instance of the Flight Client.
This might be hard to implement because it requires emitting module
imports to a specific stateful runtime module in the compiler. A benefit
is that this ensures that this particular reference is locked to a
specific client if there are multiple - e.g. talking to different
servers.
It's fairly arbitrary whether we use a WeakMap technique (like we do on
the client) vs an `$$id` (like we do on the server). Not sure what's
best overall. The WeakMap is nice because it doesn't leak implementation
details that might be abused to consumers. We should probably pick one
and unify.
We currently don't just "require" a module by its module id/path. We
encode the pair of module id/path AND its export name. That's because
with module splitting, a single original module can end up in two or
more separate modules by name. Therefore the manifest files need to
encode how to require the whole module as well as how to require each
export name.
In practice, we don't currently use this because we end up forcing
Webpack to deopt and keep it together as a single module, and we don't
even have the code in the Webpack plugin to write separate values for
each export name.
The problem is with CJS we don't statically know what all the export
names will be. Since these cases will never be module split, we don't
really need to know.
This changes the Flight requires to first look for the specific name
we're loading and then if that name doesn't exist in the manifest we
fallback to looking for the `"*"` name containing the entire module and
look for the name in there at runtime.
We could probably optimize this a bit if we assume that CJS modules on
the server never get built with a name. That way we don't have to do the
failed lookup.
Additionally, since we've recently merged filepath + name into a single
string instead of two values, we now have to split those back out by
parsing the string. This is especially unfortunate for server references
since those should really not reveal what they are but be a hash or
something. The solution might just be to split them back out into two
separate fields again.
cc @shuding
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn debug-test --watch TestName`, open
`chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
Browsers restore state like forms and scroll position right after the
popstate event. To make sure the page work as expected on back or
forward button, we need to flush transitions scheduled in a popstate
synchronously, and only yields if it suspends.
This PR adds a new HostConfig method to check if `window.event ===
'popstate'`, and `scheduleMicrotask` if a transition is scheduled in a
`PopStateEvent`.
## How did you test this change?
yarn test
If a Suspense fallback is shown, and the data finishes loading really
quickly after that, we throttle the content from appearing for 500ms to
reduce thrash.
This already works for successive fallback states (like if one fallback
is nested inside another) but it wasn't being applied to the final step
in the sequence: if there were no more unresolved Suspense boundaries in
the tree, the content would appear immediately.
This fixes the throttling behavior so that it applies to all renders
that are the result of suspended data being loaded. (Our internal jargon
term for this is a "retry".)
Many of our Suspense-related tests were written before the `act` API was
introduced, and use the lower level `waitFor` helpers instead. So they
are less resilient to changes in implementation details than they could
be.
This converts some of our test suite to use `act` in more places. I
found these while working on a PR to expand our fallback throttling
mechanism to include all renders that result from a promise resolving,
even if there are no more fallbacks in the tree.
I think this covers all the remaining tests that are affected.
Fixes https://github.com/facebook/react/issues/26500
## Summary
- No more using `clipboard-js` from the backend side, now emitting
custom `saveToClipboard` event, also adding corresponding listener in
`store.js`
- Not migrating to `navigator.clipboard` api yet, there were some issues
with using it on Chrome, will add more details to
https://github.com/facebook/react/pull/26539
## How did you test this change?
- Tested on Chrome, Firefox, Edge
- Tested on standalone electron app: seems like context menu is not
expected to work there (cannot right-click on value, the menu is not
appearing), other logic (pressing on copy icon) was not changed
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
Addresses #26352.
This PR explicitly passes an icon to `chrome.devtools.panels.create()`,
so that edge devtools will display the icon when in [Focus
Mode](https://learn.microsoft.com/en-us/microsoft-edge/devtools-guide-chromium/experimental-features/focus-mode).
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
## How did you test this change?
Passing test suite (`yarn test` & `yarn test --prod`) ✅
Passing lint (`yarn linc`) ✅
Passing type checks (`yarn flow`) ✅
**Visual Testing**
Before Changes | After Changes
:-------------------------:|:-------------------------:
|
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
Many of our Suspense-related tests were written before the `act` API was
introduced, and use the lower level `waitFor` helpers instead. So they
are less resilient to changes in implementation details than they could
be.
This converts some of our test suite to use `act` in more places. I
found these while working on a PR to expand our fallback throttling
mechanism to include all renders that result from a promise resolving,
even if there are no more fallbacks in the tree. This isn't all the
affected tests, just some of them — I'll be sharding the changes across
multiple PRs.
Since `props.x` is a possibly megamorphic access, it can be slow to
access and trigger recompilation.
When we are looping over the props and pattern matching every key,
anyway, we've already done this work. We can just reuse the same value
by stashing it outside the loop in the stack.
This only makes sense for updates in diffInCommitPhase since otherwise
we don't have the full set of props in that loop.
We also have to be careful not to skip over equal values since we need
to extract them anyway.
This traces back to https://github.com/facebook/react/pull/6449 and then
another before that.
I think that back then we favored the property over the attribute, and
setting the property wouldn't be enough. However, the default path for
these are now using attributes if we don't special case it. So we don't
need it.
The only difference is that we currently have a divergence for
symbol/function behavior between controlled values that use the
getToStringValue helpers which treat them as empty string, where as
everywhere else they're treated as null/missing.
Since this comes with a warning and is a weird error case, it's probably
fine to change.
Updates that are marked as part of a transition are allowed to block a
render from committing. Generally, other updates cannot — however,
there's one exception that's leftover from a previous iteration of our
Suspense architecture. If an update is not the result of a known urgent
event type — known as "Default" updates — then we allow it to suspend
briefly, as long as the delay is short enough that the user won't
notice. We refer to this delay as a "Just Noticable Difference" (JND)
delay. To illustrate, if the user has already waited 400ms for an update
to be reflected on the screen, the theory is that they won't notice if
you wait an additional 100ms. So React can suspend for a bit longer in
case more data comes in. The longer the user has already waited, the
longer the JND.
While we still believe this theory is sound from a UX perspective, we no
longer think the implementation complexity is worth it. The main thing
that's changed is how we handle Default updates. We used to render
Default updates concurrently (i.e. they were time sliced, and were
scheduled with postTask), but now they are blocking. Soon, they will
also be scheduled with rAF, too, which means by the end of the next rAF,
they will have either finished rendering or the main thread will be
blocked until they do. There are various motivations for this but part
of the rationale is that anything that can be made non-blocking should
be marked as a Transition, anyway, so it's not worth adding
implementation complexity to Default.
This commit removes the JND delay for Default updates. They will now
commit immediately once the render phase is complete, even if a
component suspends.
This removes the concept of `prepareUpdate()`, behind a flag.
React Native already does everything in the commit phase, but generates
a temporary update payload before applying it.
React Fabric does it both in the render phase. Now it just moves it to a
single host config.
For DOM I forked updateProperties into one that does diffing and
updating in one pass vs just applying a pre-diffed updatePayload.
There are a few downsides of this approach:
- If only "children" has changed, we end up scheduling an update to be
done in the commit phase. Since we traverse through it anyway, it's
probably not much extra.
- It does more work in the commit phase so for a large tree that is
mostly unchanged, it'll stall longer.
- It does some extra work for special cases since that work happens if
anything has changed. We no longer have a deep bailout.
- The special cases now have to each replicate the "clean up old props"
loop, leading to extra code.
The benefit is that this doesn't allocate temporary extra objects
(possibly multiple per element if the array has to resize). It's less
work overall. It also gives us an option to reuse this function for a
sync render optimization.
Another benefit is that if we do the loop in the commit phase I can do
further optimizations by reading all props that I need for special cases
in that loop instead of polymorphic reads from props. This is what I'd
like to do in future refactors that would be stacked on top of this
change.
We have moved away from HostConfig since the name does not fully
describe the configs we customize per runtime like FlightClient,
FlightServer, Fizz, and Fiber. This commit generalizes $$$hostconfig to
$$$config
part of https://github.com/facebook/react/pull/26571
merging separately to improve tracking of files renames in git
Rename HostConfig files to FiberConfig to clarify they are configs for
Fiber and not Fizz/Flight. This better conforms to the naming used in
Flight and now Fizz of `ReactFlightServerConfig` and `ReactFizzConfig`
Part of https://github.com/facebook/react/pull/26571
Implements wiring for Flight to have it's own "HostConfig" from Fizz.
Historically the ServerFormatConfigs were supposed to be generic enough
to be used by Fizz and Flight. However with the addition of features
like Float the configs have evolved to be more specific to the renderer.
We may want to get back to a place where there is a pure FormatConfig
which can be shared but for now we are embracing the fact that these
runtimes need very different things and DCE cannot adequately remove the
unused stuff for Fizz when pulling this dep into Flight so we are going
to fork the configs and just maintain separate ones.
At first the Flight config will be almost empty but once Float support
in Flight lands it will have a more complex implementation
Additionally this commit normalizes the component files which make up
FlightServerConfig and FlightClientConfig. Now each file that
participates starts with ReactFlightServerConfig... and
ReactFlightClientConfig...
## Summary
This pull request aims to improve the maintainability of the codebase by
consolidating types and constants that are shared between the backend
and frontend. This consolidation will allow us to maintain backwards
compatibility in the frontend in the future.
To achieve this, we have moved the shared types and constants to the
following blessed files:
- react-devtools-shared/src/constants
- react-devtools-shared/src/types
- react-devtools-shared/src/backend/types
- react-devtools-shared/src/backend/NativeStyleEditor/types
Please note that the inclusion of NativeStyleEditor in this list is
temporary, and we plan to remove it once we have a better plugin system
in place.
## How did you test this change?
I have tested it by running `yarn flow dom-node`, which reports no
errors.
`act` uses the `didScheduleLegacyUpdate` field to simulate the behavior
of batching in React <17 and below. It's a quirk leftover from a
previous implementation, not intentionally designed.
This sets `didScheduleLegacyUpdate` every time a legacy root receives an
update as opposed to only when the `executionContext` is empty. There's
no real reason to do it this way over some other way except that it's
how it used to work before #26512 and we should try our best to maintain
the existing behavior, quirks and all, since existing tests may have
come to accidentally rely on it.
This should fix some (though not all) of the internal Meta tests that
started failing after #26512 landed.
Will add a regression test before merging.
In #26573 I changed it so that textareas get their defaultValue reset if
you don't specify one.
However, the way that was implemented, it always set it for any update
even if it hasn't changed.
We have a test for that, but that test only works if no properties
update at all so that no update was scheduled. This fixes the test so
that it updates some unrelated prop.
I also found a test for `checked` that needed a similar fix.
Interestingly, we don't do this deduping for `defaultValue` or
`defaultChecked` on inputs and there's no test for that.
This is mainly renaming some stuff. The behavior change is
hasOwnProperty to nullish check.
I had a bigger refactor that was a dead-end but might as well land this
part and see if I can pick it up later.
This is a simplified version of #1454. The goal of this PR is to inline the
contents of `useMemo()` callbacks, rather than just immediately invoke the
lambda. Turning useMemo() into an IIFE works, but it means that we can't
optimize within the lambda block. Our investigations showed that there's a lot
of room to optimize at a finer granularity than manually written useMemo calls.
For example, one product instance had a useMemo that created a list of child JSX
elements. Most of those elements only relied on a single variable (`a`), but a
few relied on a second variable (`b). Thus _all_ elements were invalidated
whenever `b` changed. If Forget retains the original lambda, we have no choice
but to keep that (coarse) granularity for memoization. When we inline, we can
optimize to make e.g. individual JSX elements depend on their precise
dependencies.
The rough idea is:
* Keep track of all function expressions
* When we find a useMemo, lookup its function expression, and add its CFG to the
main function (the previous PR ensures that BlockIds won't collide)
* Replace any return statements with a StoreLocal to save the result and a Goto
to the code following the useMemo call.
* Then we run the usual set of passes to patch the HIR back up again.
Example:
```javascript
// Before
function Component(props) {
const x = useMemo(() => {
if (props.cond) {
return null;
}
return foo(props.x);
}, [props.x]);
return x + props.y;
}
// Intended - **before** memoization
function Component(props) {
let x;
if (props.cond) {
x = null;
} else {
x = foo(props.x);
}
return x + props.y;
}
```
Currently, `waitForThrow` tries to diff the expected value against the
thrown value if it doesn't match. However if the expectation is a
string, we are not diffing against the thrown message. This commit makes
it so if we are matching against message we also diff against message.
## Summary
- #26234 is reverted and replaced with a better approach
- introduce a new global devtools variable to decouple the global hook's
dependency on backend/console.js, and add it to react-devtools-inline
and react-devtools-standalone
With this PR, I want to introduce a new principle to hook.js: we should
always be alert when editing this file and avoid importing from other
files.
In the past, we try to inline a lot of the implementation because we use
`.toString()` to inject this function from the extension (we still have
some old comments left). Although it is no longer inlined that way, it
has became now more important to keep it clean as it is a de facto
global API people are using (9.9K files contains it on Github search as
of today).
**File size change for extension:**
Before:
379K installHook.js
After:
21K installHook.js
363K renderer.js
This PR ensures (via a static assertion function) that all terminal variants
have a SourceLocation, and adds locations to the variants which didn't have it
before. This also adds a static assertion that terminals have an InstructionId,
though we already relied on that so it was checked via usage.
This is a prerequisite to inlining `useMemo()` lambdas so that we can better
optimize them. Nested functions are evaluated with a fresh HIRBuilder, which
means that they currently have their own `bindings` object for mapping
identifier instances to IdentifierIds. This means that identifier ids in a
closure are _always_ different that those outside the closure, even when they
refer to the same identifier:
```
function Component(props) {
props; // becomes e.g. props$1
const onClick = () => {
props // becomes e.g. props$2
};
}
```
For useMemo inlining this is problematic because we've lost the association that
these identifiers actually refer to the same thing. This PR changes that,
sharing the name resolution data structure between the top-level function and
any nested function expressions.
Sophie Alpert
Mengdi Chen
Lauren Tan
Sathya Gunasekaran
Ruslan Lesiutin
Sebastian Markbåge
Rubén Norte
Tianyu Yao
Samuel Susla
Andrew Clark
Harry Zumwalt
Josh Story
Joe Savona
