* Move internal version of act to shared module
No reason to have three different copies of this anymore.
I've left the the renderer-specific `act` entry points because legacy
mode tests need to also be wrapped in `batchedUpdates`. Next, I'll update
the tests to use `batchedUpdates` manually when needed.
* Migrates tests to use internal module directly
Instead of the `unstable_concurrentAct` exports. Now we can drop those
from the public builds.
I put it in the jest-react package since that's where we put our other
testing utilities (like `toFlushAndYield`). Not so much so it can be
consumed publicly (nobody uses that package except us), but so it works
with our build tests.
* Remove unused internal fields
These were used by the old act implementation. No longer needed.
* Use existing test warning filter for server tests
We have a warning filter for our internal tests to ignore warnings
that are too noisy or that we haven't removed from our test suite yet:
shouldIgnoreConsoleError.
Many of our server rendering tests don't use this filter, though,
because it has its own special of asserting warnings.
So I added the warning filter to the server tests, too.
* Deprecate ReactDOM.render and ReactDOM.hydrate
These are no longer supported in React 18. They are replaced by the
`createRoot` API.
The warning includes a link to documentation of the new API. Currently
it redirects to the corresponding working group post. Here's the PR to
set up the redirect: https://github.com/reactjs/reactjs.org/pull/3730
Many of our tests still use ReactDOM.render. We will need to gradually
migrate them over to createRoot.
In the meantime, I added the warnings to our internal warning filter.
Refactor error/warning count tracking to avoid pre-allocating an ID for Fibers that aren't yet mounted. Instead, we store a temporary reference to the Fiber itself and later check to see if it successfully mounted before merging pending error/warning counts.
This avoids a problematic edge case where a force-remounted Fiber (from Fast Refresh) caused us to untrack a Fiber that was still mounted, resulting in a DevTools error if that Fiber was inspected in the Components tab.
DevTools now 'untrack' Fibers (cleans up the ID-to-Fiber mapping) after a slight delay in order to support a Fast Refresh edge case:
1. Component type is updated and Fast Refresh schedules an update+remount.
2. flushPendingErrorsAndWarningsAfterDelay() runs, sees the old Fiber is no longer mounted (it's been disconnected by Fast Refresh), and calls untrackFiberID() to clear it from the Map.
3. React flushes pending passive effects before it runs the next render, which logs an error or warning, which causes a new ID to be generated for this Fiber.
4. DevTools now tries to unmount the old Component with the new ID.
The underlying problem here is the premature clearing of the Fiber ID, but DevTools has no way to detect that a given Fiber has been scheduled for Fast Refresh. (The '_debugNeedsRemount' flag won't necessarily be set.)
The best we can do is to delay untracking by a small amount, and give React time to process the Fast Refresh delay.
Works around the corrupted Store state by detecting a broken Fast Refresh remount and forcefully dropping the root and re-mounting the entire tree. This prevents Fibers from getting duplicated in the Store (and in the Components tree). The benefit of this approach is that it doesn't rely on an update or change in behavior to Fast Refresh. (This workaround is pretty dirty, but since it's a DEV-only code path, it's probably okay.)
Note that this change doesn't fix all of the reported issues (see #21442 (comment)) but it does fix some of them.
This commit also slightly refactors the way DevTools assigns and manages unique IDs for Fibers in the backend by removing the indirection of a "primary Fiber" and instead mapping both the primary and alternate.
It also removes the previous cache-on-read behavior of getFiberID and splits the method into three separate functions for different use cases:
* getOrGenerateFiberID – Like the previous function, this method returns an ID or generates and caches a new one if the Fiber hasn't been seen before.
* getFiberIDUnsafe – This function returns an ID if one has already been generated or null if not. (It can be used to e.g. log a message about a Fiber without potentially causing it to leak.)
* getFiberIDThrows – This function returns an ID if one has already been generated or it throws. (It can be used to guarantee expected behavior rather than to silently cause a leak.)
The following APIs have been added to the `react` stable entry point:
* `SuspenseList`
* `startTransition`
* `unstable_createMutableSource`
* `unstable_useMutableSource`
* `useDeferredValue`
* `useTransition`
The following APIs have been added or removed from the `react-dom` stable entry point:
* `createRoot`
* `unstable_createPortal` (removed)
The following APIs have been added to the `react-is` stable entry point:
* `SuspenseList`
* `isSuspenseList`
The following feature flags have been changed from experimental to true:
* `enableLazyElements`
* `enableSelectiveHydration`
* `enableSuspenseServerRenderer`
The outermost `batchedUpdates` call flushes pending sync updates at the
end. This was intended for legacy sync mode, but it also happens to
flush discrete updates in concurrent mode.
Instead, we should only flush sync updates at the end of
`batchedUpdates` for legacy roots. Discrete sync updates can wait to
flush in the microtask.
`discreteUpdates` has the same issue, which is how I originally noticed
this, but I'll change that one in a separate commit since it requires
updating a few (no longer relevant) internal tests.
I recently added UI for the Profiler's commit and post-commit durations to the DevTools, but I made two pretty silly oversights:
1. I used the commit hook (called after mutation+layout effects) to read both the layout and passive effect durations. This is silly because passive effects may not have flushed yet git at this point.
2. I didn't reset the values on the HostRoot node, so they accumulated with each commit.
This commitR addresses both issues:
1. First it adds a new DevTools hook, onPostCommitRoot*, to be called after passive effects get flushed. This gives DevTools the opportunity to read passive effect durations (if the build of React being profiled supports it).
2. Second the work loop resets these durations (on the HostRoot) after calling the post-commit hook so address the accumulation problem.
I've also added a unit test to guard against this regressing in the future.
* Doing this in flushPassiveEffectsImpl seemed simplest, since there are so many places we flush passive effects. Is there any potential problem with this though?
* DevTools flushes updated passive warning/error info after delay
Previously this information was not flushed until the next commit, but this provides a worse user experience if the next commit is really delayed. Instead, the backend now flushes only the warning/error counts after a delay. As a safety, if there are already any pending operations in the queue, we bail.
Co-authored-by: eps1lon <silbermann.sebastian@gmail.com>
* Restore inspect-element bridge optimizations
When the new Suspense cache was integrated (so that startTransition could be used) I removed a couple of optimizations between the backend and frontend that reduced bridge traffic when e.g. dehydrated paths were inspected for elements that had not rendered since previously inspected. This commit re-adds those optimizations as well as an additional test with a bug fix that I noticed while reading the backend code.
There are two remaining TODO items as of this commit:
- Make inspected element edits and deletes also use transition API
- Don't over-eagerly refresh the cache in our ping-for-updates handler
I will addres both in subsequent commits.
* Poll for update only refreshes cache when there's an update
* Added inline comment
DevTools was built with a fork of an early idea for how Suspense cache might work. This idea is incompatible with newer APIs like `useTransition` which unfortunately prevented me from making certain UX improvements. This PR swaps out the primary usage of this cache (there are a few) in favor of the newer `unstable_getCacheForType` and `unstable_useCacheRefresh` APIs. We can go back and update the others in follow up PRs.
### Messaging changes
I've refactored the way the frontend loads component props/state/etc to hopefully make it better match the Suspense+cache model. Doing this gave up some of the small optimizations I'd added but hopefully the actual performance impact of that is minor and the overall ergonomic improvements of working with the cache API make this worth it.
The backend no longer remembers inspected paths. Instead, the frontend sends them every time and the backend sends a response with those paths. I've also added a new "force" parameter that the frontend can use to tell the backend to send a response even if the component hasn't rendered since the last time it asked. (This is used to get data for newly inspected paths.)
_Initial inspection..._
```
front | | back
| -- "inspect" (id:1, paths:[], force:true) ---------> |
| <------------------------ "inspected" (full-data) -- |
```
_1 second passes with no updates..._
```
| -- "inspect" (id:1, paths:[], force:false) --------> |
| <------------------------ "inspected" (no-change) -- |
```
_User clicks to expand a path, aka hydrate..._
```
| -- "inspect" (id:1, paths:['foo'], force:true) ----> |
| <------------------------ "inspected" (full-data) -- |
```
_1 second passes during which there is an update..._
```
| -- "inspect" (id:1, paths:['foo'], force:false) ---> |
| <----------------- "inspectedElement" (full-data) -- |
```
### Clear errors/warnings transition
Previously this meant there would be a delay after clicking the "clear" button. The UX after this change is much improved.
### Hydrating paths transition
I also added a transition to hydration (expanding "dehyrated" paths).
### Better error boundaries
I also added a lower-level error boundary in case the new suspense operation ever failed. It provides a better "retry" mechanism (select a new element) so DevTools doesn't become entirely useful. Here I'm intentionally causing an error every time I select an element.
### Improved snapshot tests
I also migrated several of the existing snapshot tests to use inline snapshots and added a new serializer for dehydrated props. Inline snapshots are easier to verify and maintain and the new serializer means dehydrated props will be formatted in a way that makes sense rather than being empty (in external snapshots) or super verbose (default inline snapshot format).
* bump package to latest
* update files to respect lint
* disable object-type-delimiter rule to work with prettier
* disable rule to let flow check pass
This is done so that any effects scheduled by the shallow render are thrown away.
Unlike the code this was forked from (in ReactComponentStackFrame) DevTools should override the dispatcher even when DevTools is compiled in production mode, because the app itself may be in development mode and log errors/warnings.
* Improve DevTools editing interface
This commit adds the ability to rename or delete keys in the props/state/hooks/context editor and adds tests to cover this functionality. DevTools will degrade gracefully for older versions of React that do not inject the new reconciler rename* or delete* methods.
Specifically, this commit includes the following changes:
* Adds unit tests (for modern and legacy renderers) to cover overriding props, renaming keys, and deleting keys.
* Refactor backend override methods to reduce redundant Bridge/Agent listeners and methods.
* Inject new (DEV-only) methods from reconciler into DevTools to rename and delete paths.
* Refactor 'inspected element' UI components to improve readability.
* Improve auto-size input to better mimic Chrome's Style editor panel. (See this Code Sandbox for a proof of concept.)
It also contains the following code cleanup:
* Additional unit tests have been added for modifying values as well as renaming or deleting paths.
* Four new DEV-only methods have been added to the reconciler to be injected into the DevTools hook: overrideHookStateDeletePath, overrideHookStateRenamePath, overridePropsDeletePath, and overridePropsRenamePath. (DevTools will degrade gracefully for older renderers without these methods.)
* I also took this as an opportunity to refactor some of the existing code in a few places:
* Rather than the backend implementing separate methods for editing props, state, hooks, and context– there are now three methods: deletePath, renamePath, and overrideValueAtPath that accept a type argument to differentiate between props, state, context, or hooks.
* The various UI components for the DevTools frontend have been refactored to remove some unnecessary repetition.
This commit also adds temporary support for override* commands with mismatched backend/frontend versions:
* Add message forwarding for older backend methods (overrideContext, overrideHookState, overrideProps, and overrideState) to the new overrideValueAtPath method. This was done in both the frontend Bridge (for newer frontends passing messages to older embedded backends) and in the backend Agent (for older frontends passing messages to newer backends). We do this because React Native embeds the React DevTools backend, but cannot control which version of the frontend users use.
* Additional unit tests have been added as well to cover the older frontend to newer backend case. Our DevTools test infra does not make it easy to write tests for the other way around.
In the next major release, we intend to drop support for using the `act`
testing helper in production. (It already fires a warning.) The
rationale is that, in order for `act` to work, you must either mock the
testing environment or add extra logic at runtime. Mocking the testing
environment isn't ideal because it requires extra set up for the user.
Extra logic at runtime is fine only in development mode — we don't want
to slow down the production builds.
Since most people only run their tests in development mode, dropping
support for production should be fine; if there's demand, we can add it
back later using a special testing build that is identical to the
production build except for the additional testing logic.
One blocker for removing production support is that we currently use
`act` to test React itself. We must test React in both development and
production modes.
So, the solution is to fork `act` into separate public and
internal implementations:
- *public implementation of `act`* – exposed to users, only works in
development mode, uses special runtime logic, does not support partial
rendering
- *internal implementation of `act`* – private, works in both
development and productionm modes, only used by the React Core test
suite, uses no special runtime logic, supports partial rendering (i.e.
`toFlushAndYieldThrough`)
The internal implementation should mostly match the public
implementation's behavior, but since it's a private API, it doesn't have
to match exactly. It works by mocking the test environment: it uses a
mock build of Scheduler to flush rendering tasks, and Jest's mock timers
to flush Suspense placeholders.
---
In this first commit, I've added the internal forks of `act` and
migrated our tests to use them. The public `act` implementation is
unaffected for now; I will leave refactoring/clean-up for a later step.
* ensure getDisplayName is only called on functions
* add SuspenseList to Dev tools element names
* Add SuspenseList and pass tests
* Import SuspenseList directly
* run prettier
* Refactor tests to use real components
* run linter
* Support inner component _debugOwner in memo
* test with devtool context
* remove memo test
* Merged master; tweaked test and snapshot
* Pass owner to createFiber fn when creating a memo component.
Co-authored-by: Theodore Han <tqhan317@gmail.com>
DevTools has a feature to force a Suspense boundary to show a fallback.
This feature causes us to skip the first render pass (where we render
the primary children) and go straight to rendering the fallback.
There's a Legacy Mode-only codepath that failed to take this scenario
into account, instead assuming that whenever a fallback is being
rendered, it was preceded by an attempt to render the primary children.
SuspenseList can also cause us to skip the first pass, but the relevant
branch is Legacy Mode-only, and SuspenseList is not supported in
Legacy Mode.
Fixes a test that I had temporarily disabled when upstreaming the Lanes
implementation in #19108.
* Add autofix to cross-fork lint rule
* replace-fork: Replaces old fork contents with new
For each file in the new fork, copies the contents into the
corresponding file of the old fork, replacing what was already there.
In contrast to merge-fork, which performs a three-way merge.
* Replace old fork contents with new fork
First I ran `yarn replace-fork`.
Then I ran `yarn lint` with autofix enabled. There's currently no way to
do that from the command line (we should fix that), so I had to edit the
lint script file.
* Manual fix-ups
Removes dead branches, removes prefixes from internal fields. Stuff
like that.
* Fix DevTools tests
DevTools tests only run against the old fork, which is why I didn't
catch these earlier.
There is one test that is still failing. I'm fairly certain it's related
to the layout of the Suspense fiber: we no longer conditionally wrap the
primary children. They are always wrapped in an extra fiber.
Since this has been running in www for weeks without major issues, I'll
defer fixing the remaining test to a follow up.
Andrew Clark
Brian Vaughn
Bao Pham
Sebastian Silbermann
ChenLei
oltrep
IDrissAitHafid
Todor Totev
6h057
Ben Pernick
Pascal Fong Kye
Ricky