This flag first moves the `shouldYield()` logic into React itself. We
need this for `postTask` compatibility anyway since this logic is no
longer a concern of the scheduler. This means that there can also be no
global `requestPaint()` that asks for painting earlier. So this is best
rolled out with `enableAlwaysYieldScheduler` (and ideally
`enableYieldingBeforePassive`) instead of `enableRequestPaint`.
Once in React we can change the yield timing heuristics. This uses the
previous 5ms for Idle work to keep everything responsive while doing
background work. However, for Transitions and Retries we have seen that
same thread animations (like loading states animating, or constant
animations like cool Three.js stuff) can take CPU time away from the
Transition that causes moving into new content to slow down. Therefore
we only yield every 25ms.
The purpose of this yield is not to avoid the overhead of yielding,
which is very low, but rather to intentionally block any frequently
occurring other main thread work like animations from starving our work.
If we could we could just tell everyone else to throttle their stuff for
ideal scheduling but that's not quite realistic. In other words, the
purpose of this is to reduce the frame rate of animations to 30 fps and
we achieve this by not yielding. We still do yield to allow the
animations to not just stall. This seems like a good balance.
The 5ms of Idle is because we don't really need to yield less often
since the overhead is low. We keep it low to allow 120 fps animations to
run if necessary and our work may not be the only work within a frame so
we need to yield early enough to leave enough time left.
Similarly we choose 25ms rather than say 35ms to ensure that we push
long enough to guarantee to half the frame rate but low enough that
there's plenty of time left for a rAF to power each animation every
other frame. It's also low enough that if something else interrupts the
work like a new interaction, we can still be responsive to that within
50ms or so. We also need to yield in case there's I/O work that needs to
get bounced through the main thread.
This flag is currently off everywhere since we have so many other
scheduling flags but that means there's some urgency to roll those out
fully so we can test this one. There's also some tests to update since
this doesn't go through the Mock scheduler anymore for yields.
https://github.com/facebook/react/pull/31785 turned on
`enableYieldingBeforePassive` for the internal test renderer builds. We
have some failing tests on the RN side blocking the sync so lets turn
these off for now.
This treats workInProgressRoot work and rootWithPendingPassiveEffects
the same way. Basically as long as there's some work on the root, yield
the current task. Including passive effects. This means that passive
effects are now a continuation instead of a separate callback. This can
mean they're earlier or later than before. Later for Idle in case
there's other non-React work. Earlier for same Default if there's other
Default priority work.
This makes sense since increasing priority of the passive effects beyond
Idle doesn't really make sense for an Idle render.
However, for any given render at same priority it's more important to
complete this work than start something new.
Since we special case continuations to always yield to the browser, this
has the same effect as #31784 without implementing `requestPaint`. At
least assuming nothing else calls `requestPaint`.
<img width="587" alt="Screenshot 2024-12-14 at 5 37 37 PM"
src="https://github.com/user-attachments/assets/8641b172-8842-4191-8bf0-50cbe263a30c"
/>
This flag controls the strict mode double invoke render/lifecycles/etc
behavior in Strict Mode.
The only place this flag is off is the test renderers, which it should
be on for.
If we can land this, we can follow up to remove the flag.
We introduced the `unstable_useContextWithBailout` API to run compiler
based experiments. This API was designed to be an experiment proxy for
alternative approaches which would be heavier to implement. The
experiment turned out to be inconclusive. Since most of our performance
critical usage is already optimized, we weren't able to find a clear win
with this approach.
Since we don't have further plans for this API, let's clean it up.
Related to #31752.
When hydrating, we have two different ways of handling a Suspense
boundary that the server has already given up on and decided to client
render. If we have already hydrated the parent and then later this
happens, then we'll use the retry lane like any ping. If we discover
that it was already in client-render mode when we discover the Suspense
boundary for the first time, then schedule a default lane to let us
first finish the current render and then upgrade the priority to sync to
try to client render this boundary as soon as possible since we're
holding back content.
We used to use the `DefaultHydrationLane` for this but this is not
really a Hydration. It's actually a client render. If we get any other
updates flowing in from above at the same time we might as well do them
in the same pass instead of two passes. So this should be considered
more like any update.
This also means that visually the client render pass now gets painted as
a render instead of a hydration.
This show the flow of a shell being hydrated at the default priority,
then a Suspense boundary being discovered and hydrated at Idle and then
an inner boundary being discovered as client rendered which gets
upgraded to default.
<img width="1363" alt="Screenshot 2024-12-14 at 12 13 57 AM"
src="https://github.com/user-attachments/assets/a141133e-4856-4f38-a11f-f26bd00b6245"
/>
When scheduling the initial root and when using
`unstable_scheduleHydration` we should use the Hydration Lanes rather
than the raw update lane. This ensures that we're always hydrating using
a Hydration Lane or the Offscreen Lane rather than other lanes getting
some random hydration in it.
This fixes an issue where updating a root while it is still hydrating
causes it to trigger client rendering when it could just hydrate and
then apply the update on top of that.
It also fixes a potential performance issue where
`unstable_scheduleHydration` gets batched with an update that then ends
up forcing an update of a boundary that requires it to rewind to do the
hydration lane anyway. Might as well just start with the hydration
without the update applied first.
I added a kill switch (`enableHydrationLaneScheduling`) just in case but
seems very safe given that using `unstable_scheduleHydration` at all is
very rare and updating the root before the shell hydrates is extremely
rare (and used to trigger a recoverable error).
This clarifies a few things by ensuring that there is always at least
one required field. This can be used to refine the object to one of the
specific types. However, it's probably just a matter of time until we
make this tagged unions instead. E.g. it would be nice to rename the
`name` field `ReactComponentInfo` to `type` and tag it with the React
Element symbol because then it's just the same as a React Element.
I also extract a time field. The idea is that this will advance (or
rewind) the time to the new timestamp and then anything below would be
defined as happening within that time stamp. E.g. to model the start and
end for a server component you'd do something like:
```
[
{time: 123},
{name: 'Component', ... },
{time: 124},
]
```
The reason this needs to be in the `ReactDebugInfo` is so that timing
information from one environment gets transferred into the next
environment. It lets you take a Promise from one world and transfer it
into another world and its timing information is preserved without
everything else being preserved.
I've gone back and forth on if this should be part of each other Info
object like `ReactComponentInfo` but since those can be deduped and can
change formats (e.g. this should really just be a React Element) it's
better to store this separately.
The time format is relative to a `timeOrigin` which is the current
environment's `timeOrigin`. When it's serialized between environments
this needs to be considered.
Emitting these timings is not yet implemented in this PR.
---------
Co-authored-by: eps1lon <sebastian.silbermann@vercel.com>
A long standing issue for React has been that if you reorder stateful
nodes, they may lose their state and reload. The thing moving loses its
state. There's no way to solve this in general where two stateful nodes
swap.
The [`moveBefore()`
proposal](https://chromestatus.com/feature/5135990159835136?gate=5177450351558656)
has now moved to
[intent-to-ship](https://groups.google.com/a/chromium.org/g/blink-dev/c/YE_xLH6MkRs/m/_7CD0NYMAAAJ).
This function is kind of like `insertBefore` but preserves state.
There's [a demo here](https://state-preserving-atomic-move.glitch.me/).
Ideally we'd port this demo to a fixture so we can try it.
Currently this flag is always off - even in experimental. That's because
this is still behind a Chrome flag so it's a little early to turn it on
even in experimental. So you need a custom build. It's on in RN but only
because it doesn't apply there which makes it easier to tell that it's
safe to ship once it's on everywhere else.
The other reason it's still off is because there's currently a semantic
breaking change. `moveBefore()` errors if both nodes are disconnected.
That happens if we're inside a completely disconnected React root.
That's not usually how you should use React because it means effects
can't read layout etc. However, it is currently supported. To handle
this we'd have to try/catch the `moveBefore` to handle this case but we
hope this semantic will change before it ships. Before we turn this on
in experimental we either have to wait for the implementation to not
error in the disconnected-disconnected case in Chrome or we'd have to
add try/catch.
In preparation for the next RC, I set this feature flag to true
everywhere. I did not delete the feature flag yet, in case there are yet
more bugs to be discovered.
I also didn't remove the dynamic feature flag from the Meta builds; I'll
let the Meta folks handle that.
We don't actually want the source mapped version of `.stack` from errors
because that would cause us to not be able to associate it with a source
map in the UIs that need it. The strategy in browsers is more correct
where the display is responsible for source maps.
That's why we disable any custom `prepareStackTrace` like the ones added
by `source-map`. We reset it to `undefined`.
However, when running node with `--enable-source-maps` the default for
`prepareStackTrace` which is a V8 feature (but may exist elsewhere too
like Bun) is a source mapped version of the stack. In those environments
we need to reset it to a default implementation that doesn't apply
source maps.
We already did this in Flight using the `ReactFlightStackConfigV8.js`
config. However, we need this more generally in the
`shared/ReactComponentStackFrame` implementation.
We could always set it to the default implementation instead of
`undefined` but that's unnecessary code in browser builds and it might
lead to slightly different results. For safety and code size, this PR
does it with a fork instead.
All builds specific to `node` or `edge` (or `markup` which is a server
feature) gets the default implementation where as everything else (e.g.
browsers) get `undefined` since it's expected that this is not source
mapped. We don't have to do anything about the equivalent in React
DevTools since React DevTools doesn't run on the server.
Reverts facebook/react#31403 to reenable lazy context propagation
The disabling was to produce a build that could help track down whether
this flag is causing a possibly related bug in transitions but we don't
intend to disable it just fix forward once we figure out what the
problem is
disables lazy context propagation in oss to help determine if it is
causing bugs in startTransition. Will reenable after cutting a canary
release with this flag disabled
We're seeing issues with this feature internally including bugs with
sibling prerendering and errors that are difficult for developers to
action on. We'll turn off the feature for the time being until we can
improve the stability and ergonomics.
This PR does two things:
- Turn off `enableInfiniteLoopDetection` everywhere while leaving it as
a variant on www so we can do further experimentation.
- Revert https://github.com/facebook/react/pull/31061 which was a
temporary change for debugging. This brings the feature back to
baseline.
This allows us to show props in React DevTools when inspecting a Server
Component.
I currently drastically limit the object depth that's serialized since
this is very implicit and you can have heavy objects on the server.
We previously was using the general outlineModel to outline
ReactComponentInfo but we weren't consistently using it everywhere which
could cause some bugs with the parsing when it got deduped on the
client. It also lead to the weird feature detect of `isReactComponent`.
It also meant that this serialization was using the plain serialization
instead of `renderConsoleValue` which means we couldn't safely serialize
arbitrary debug info that isn't serializable there.
So the main change here is to call `outlineComponentInfo` and have that
always write every "Server Component" instance as outlined and in a way
that lets its props be serialized using `renderConsoleValue`.
<img width="1150" alt="Screenshot 2024-10-01 at 1 25 05 AM"
src="https://github.com/user-attachments/assets/f6e7811d-51a3-46b9-bbe0-1b8276849ed4">
This flag will be used to gate a new timeline profiler that's integrate
with the Performance Tab and the new performance.measure extensions in
Chrome.
It replaces the existing DevTools feature so this disables
enableSchedulingProfiler when it is enabled since they can interplay in
weird ways potentially.
This means that experimental React now disable scheduling profiler and
enables this new approach.
Insertion effects do not unmount when a subtree is removed while
offscreen.
Current behavior for an insertion effect is if the component goes
- *visible -> removed:* calls insertion effect cleanup
- *visible -> offscreen -> removed:* insertion effect cleanup is never
called
This makes it so we always call insertion effect cleanup when removing
the component.
Likely also fixes https://github.com/facebook/react/issues/26670
---------
Co-authored-by: Rick Hanlon <rickhanlonii@fb.com>
Ricky
Sebastian Markbåge
Jack Pope
Sebastian "Sebbie" Silbermann
Andrew Clark
Noah Lemen
lauren
Jan Kassens
Josh Story