This is a change to some undefined behavior that we though we would do
at one point but decided not to roll out. It's already disabled
everywhere, so this just deletes the branch from the implementation and
the tests.
Added an explicit type to all $FlowFixMe suppressions to reduce
over-suppressions of new errors that might be caused on the same lines.
Also removes suppressions that aren't used (e.g. in a `@noflow` file as
they're purely misleading)
Test Plan:
yarn flow-ci
Today if something suspends, React will continue rendering the siblings
of that component.
Our original rationale for prerendering the siblings of a suspended
component was to initiate any lazy fetches that they might contain. This
was when we were more bullish about lazy fetching being a good idea some
of the time (when combined with prefetching), as opposed to our latest
thinking, which is that it's almost always a bad idea.
Another rationale for the original behavior was that the render was I/O
bound, anyway, so we might as do some extra work in the meantime. But
this was before we had the concept of instant loading states: when
navigating to a new screen, it's better to show a loading state as soon
as you can (often a skeleton UI), rather than delay the transition.
(There are still cases where we block the render, when a suitable
loading state is not available; it's just not _all_ cases where
something suspends.) So the biggest issue with our existing
implementation is that the prerendering of the siblings happens within
the same render pass as the one that suspended — _before_ the loading
state appears.
What we should do instead is immediately unwind the stack as soon as
something suspends, to unblock the loading state.
If we want to preserve the ability to prerender the siblings, what we
could do is schedule special render pass immediately after the fallback
is displayed. This is likely what we'll do in the future. However, in
the new implementation of `use`, there's another reason we don't
prerender siblings: so we can preserve the state of the stack when
something suspends, and resume where we left of when the promise
resolves without replaying the parents. The only way to do this
currently is to suspend the entire work loop. Fiber does not currently
support rendering multiple siblings in "parallel". Once you move onto
the next sibling, the stack of the previous sibling is discarded and
cannot be restored. We do plan to implement this feature, but it will
require a not-insignificant refactor.
Given that lazy data fetching is already bad for performance, the best
trade off for now seems to be to disable prerendering of siblings. This
gives us the best performance characteristics when you're following best
practices (i.e. hoist data fetches to Server Components or route
loaders), at the expense of making an already bad pattern a bit worse.
Later, when we implement resumable context stacks, we can reenable
sibling prerendering. Though even then the use case will mostly be to
prerender the CPU-bound work, not lazy fetches.
I'm trying to get rid of all meta programming in the module scope so
that closure can do a better job figuring out cyclic dependencies and
ability to reorder.
This is converting a lot of the patterns that assign functions
conditionally to using function declarations instead.
```
let fn;
if (__DEV__) {
fn = function() {
...
};
}
```
->
```
function fn() {
if (__DEV__) {
...
}
}
```
This doesn't need its own set of flags. We use things like `__PROFILE__`
in the regular feature flags file to fork for the `react-dom/profiling`
build so we can do the same here if needed but I don't think we actually
need to fork this anywhere as far as I can tell.
We disallow empty strings for `href` and `src` since they're common
mistakes that end up loading the current page as a preload, image or
link. We also disallow it for `action`. You have to pass `null` which is
the same.
However, for `formAction` passing `null` is not the same as passing
empty string. Passing empty string overrides the form's action to be the
current page even if the form's action was set to something else.
There's no easy way to express the same thing `#` show up in the user
visible URLs and `?` clears the search params.
Since this is also not a common mistake, we can just allow this.
This adds `encodeReply` to the Flight Client and `decodeReply` to the
Flight Server.
Basically, it's a reverse Flight. It serializes values passed from the
client to the server. I call this a "Reply". The tradeoffs and
implementation details are a bit different so it requires its own
implementation but is basically a clone of the Flight Server/Client but
in reverse. Either through callServer or ServerContext.
The goal of this project is to provide the equivalent serialization as
passing props through RSC to client. Except React Elements and
Components and such. So that you can pass a value to the client and back
and it should have the same serialization constraints so when we add
features in one direction we should mostly add it in the other.
Browser support for streaming request bodies are currently very limited
in that only Chrome supports it. So this doesn't produce a
ReadableStream. Instead `encodeReply` produces either a JSON string or
FormData. It uses a JSON string if it's a simple enough payload. For
advanced features it uses FormData. This will also let the browser
stream things like File objects (even though they're not yet supported
since it follows the same rules as the other Flight).
On the server side, you can either consume this by blocking on
generating a FormData object or you can stream in the
`multipart/form-data`. Even if the client isn't streaming data, the
network does. On Node.js busboy seems to be the canonical library for
this, so I exposed a `decodeReplyFromBusboy` in the Node build. However,
if there's ever a web-standard way to stream form data, or if a library
wins in that space we can support it. We can also just build a multipart
parser that takes a ReadableStream built-in.
On the server, server references passed as arguments are loaded from
Node or Webpack just like the client or SSR does. This means that you
can create higher order functions on the client or server. This can be
tokenized when done from a server components but this is a security
implication as it might be tempting to think that these are not fungible
but you can swap one function for another on the client. So you have to
basically treat an incoming argument as insecure, even if it's a
function.
I'm not too happy with the naming parity:
Encode `server.renderToReadableStream` Decode: `client.createFromFetch`
Decode `client.encodeReply` Decode: `server.decodeReply`
This is mainly an implementation details of frameworks but it's annoying
nonetheless. This comes from that `renderToReadableStream` does do some
"rendering" by unwrapping server components etc. The `create` part comes
from the parity with Fizz/Fiber where you `render` on the server and
`create` a root on the client.
Open to bike-shedding this some more.
---------
Co-authored-by: Josh Story <josh.c.story@gmail.com>
(This only affects our own internal repo; it's not a public API.)
I think most of us agree this is a less confusing name. It's possible
someone will confuse it with `console.log`. If that becomes a problem we
can warn in dev or something.
There is a problem with <style> as resource. For css-in-js libs there
may be an very large number of these hoistables being created. The
number of style tags can grow quickly and to help reduce the prevalence
of this FIzz now aggregates all style tags for a given precedence into a
single tag. The client can 'hydrate' against these compound tags but
currently on the client insertions are done individually.
additionally drops the implementation where style tags are embedding in
a template for one where `media="not all"` is set. The idea is to have
the browser construct the underlying stylesheet eagerly which does not
happen if the tag is embedded in a template
Key Decision:
One choice made in this PR is that we flush style tags eagerly even if a
boundary is blocked that is the only thing that depends on that style
rule. The reason we are starting with this implementation is that it
allows a very condensed representation of the style resources. If we
tracked which rules were used in which boundaries we would need a style
resource for every rendered <style> tag. This could be problematic for
css-in-js libs that might render hundreds or thousands of style tags.
The tradeoff here is we slightly delay content reveal in some cases (we
send extra bytes) but we have fewer DOM tags and faster SSR runtime
The old version of prettier we were using didn't support the Flow syntax
to access properties in a type using `SomeType['prop']`. This updates
`prettier` and `rollup-plugin-prettier` to the latest versions.
I added the prettier config `arrowParens: "avoid"` to reduce the diff
size as the default has changed in Prettier 2.0. The largest amount of
changes comes from function expressions now having a space. This doesn't
have an option to preserve the old behavior, so we have to update this.
## Summary
The flag was first added in #16157 and was rolled out to employees in
D17430095. #25997 removed this flag because it wasn't dynamically set to
a value in www. The www side was mistakenly removed in D41851685 due to
deprecation of a TypedJSModule but we still want to keep this flag, so
let's add it back in + add a GK on the www side to match the previous
rollout.
See D42574435 for the dynamic value change in www
## How did you test this change?
```
yarn test
yarn test --prod
```
This renames Module References to Client References, since they are in
the server->client direction.
I also changed the Proxies exposed from the `node-register` loader to
provide better error messages. Ideally, some of this should be
replicated in the ESM loader too but neither are the source of truth.
We'll replicate this in the static form in the Next.js loaders. cc
@huozhi @shuding
- All references are now functions so that when you call them on the
server, we can yield a better error message.
- References that are themselves already referring to an export name are
now proxies that error when you dot into them.
- `use(...)` can now be used on a client reference to unwrap it server
side and then pass a reference to the awaited value.
I noticed this was an experiment concluded 16 months ago (#21679) that
this extra work is beneficial
to break up cycles leaking memory in product code.
These values are never imported into `ReactFeatureFlags.www.js`, so
they're unused:
- `allowConcurrentByDefault`
- `consoleManagedByDevToolsDuringStrictMode`
These values are never set in the WWW module
(https://fburl.com/code/dsb2ohv8), so they're always `undefined` on www:
- `createRootStrictEffectsByDefault`
- `enableClientRenderFallbackOnTextMismatch`
This enables the "exact_empty_objects" setting for Flow which makes
empty objects exact instead of building up the type as properties are
added in code below. This is in preparation to Flow 191 which makes this
the default and removes the config.
More about the change in the Flow blog
[here](https://medium.com/flow-type/improved-handling-of-the-empty-object-in-flow-ead91887e40c).
This setting is an incremental path to the next Flow version enforcing
type annotations on most functions (except some inline callbacks).
Used
```
node_modules/.bin/flow codemod annotate-functions-and-classes --write .
```
to add a majority of the types with some hand cleanup when for large
inferred objects that should just be `Fiber` or weird constructs
including `any`.
Suppressed the remaining issues.
Builds on #25918
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn debug-test --watch TestName`, open
`chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
This is the other approach for unifying default and sync lane
https://github.com/facebook/react/pull/25524.
The approach in that PR is to merge default and continuous lane into the
sync lane, and use a new field to track the priority. But there are a
couple places that field will be needed, and it is difficult to
correctly reset the field when there is no sync lane.
In this PR we take the other approach that doesn't remove any lane, but
batch them to get the behavior we want.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
yarn test
Co-authored-by: Andrew Clark <hi@andrewclark.io>
Flow introduced a new syntax to annotated the context type of a
function, this tries to update the rest and add 1 example usage.
- 2b1fb91a55 already added the changes
required for eslint.
- Jest transform is updated to use the recommended `hermes-parser` which
can parse current and Flow syntax and will be updated in the future.
- Rollup uses a new plugin to strip the flow types. This isn't ideal as
the npm module is deprecated in favor of using `hermes-parser`, but I
couldn't figure out how to integrate that with Rollup.
We originally had grand plans for using this Event concept for more but
now it's only meant to be used in combination with effects.
It's an Event in the FRP terms, that is triggered from an Effect.
Technically it can also be from another function that itself is
triggered from an existing side-effect but that's kind of an advanced
case.
The canonical case is an effect that triggers an event:
```js
const onHappened = useEffectEvent(() => ...);
useEffect(() => {
onHappened();
}, []);
```
This isn't the right way to do this, but internally we have some
restrictions so we need to add an indirection. Let's land this now so we
can catch up our sync and then fix forward from there.
Co-authored-by: Jan Kassens <jkassens@meta.com>
We've heard from multiple contributors that the Reconciler forking
mechanism was confusing and/or annoying to deal with. Since it's
currently unused and there's no immediate plans to start using it again,
this removes the forking.
Fully removing the fork is split into 2 steps to preserve file history:
**This PR**
- remove `enableNewReconciler` feature flag.
- remove `unstable_isNewReconciler` export
- remove eslint rules for cross fork imports
- remove `*.new.js` files and update imports
- merge non-suffixed files into `*.old` files where both exist
(sometimes types were defined there)
**#25775**
- rename `*.old` files
This improves the error message a bit and ensures that we recommend
putting the key first, not last, which ensures that the faster
`jsx-runtime` is used.
This only affects the modern "automatic" JSX transform.
* Add fetch instrumentation in cached contexts
* Avoid unhandled rejection errors for Promises that we intentionally ignore
In the final passes, we ignore the newly generated Promises and use
the previous ones. This ensures that if those generate errors, that we
intentionally ignore those.
* Add extra fetch properties if there were any
* Facebook -> Meta in copyright
rg --files | xargs sed -i 's#Copyright (c) Facebook, Inc. and its affiliates.#Copyright (c) Meta Platforms, Inc. and affiliates.#g'
* Manual tweaks
* Add feature flag for external Fizz runtime
Only enabled for www for now
* Add option to load Fizz runtime from external file
When unstable_externalRuntimeSrc is provided, React will inject a script
tag that points to the provided URL.
Then, instead of emitting inline scripts, the Fizz stream will emit
HTML nodes with data attributes that encode the instructions. The
external runtime will detect these with a mutation observer and
translate them into runtime commands. This part isn't implemented in
this PR, though — all this does is set up the option to use
an external runtime, and inject the script tag.
The external runtime is injected at the same time as bootstrap scripts.
Andrew Clark
Ricky
Jan Kassens
Sebastian Markbåge
Josh Story
Ming Ye
an onion
Tianyu Yao
lauren
Sebastian Silbermann
mofeiZ
Samuel Susla
Joseph Savona