This exposes a `resume()` API to go with the `prerender()` (only in
experimental). It doesn't work yet since we don't yet emit the postponed
state so not yet tested.
The main thing this does is rename ResponseState->RenderState and
Resources->ResumableState. We separated out resources into a separate
concept preemptively since it seemed like separate enough but probably
doesn't warrant being a separate concept. The result is that we have a
per RenderState in the Config which is really just temporary state and
things that must be flushed completely in the prerender. Most things
should be ResumableState.
Most options are specified in the `prerender()` and transferred into the
`resume()` but certain options that are unique per request can't be.
Notably `nonce` is special. This means that bootstrap scripts and
external runtime can't use `nonce` in this mode. They need to have a CSP
configured to deal with external scripts, but not inline.
We need to be able to restore state of things that we've already emitted
in the prerender. We could have separate snapshot/restore methods that
does this work when it happens but that means we have to explicitly do
that work. This design is trying to keep to the principle that we just
work with resumable data structures instead so that we're designing for
it with every feature. It also makes restoring faster since it's just
straight into the data structure.
This is not yet a serializable format. That can be done in a follow up.
We also need to vet that each step makes sense. Notably stylesToHoist is
a bit unclear how it'll work.
renderToString is a legacy server API which used a trick to avoid having
the DOCTYPE included when rendering full documents by setting the root
formatcontext to HTML_MODE rather than ROOT_HTML_MODE. Previously this
was of little consequence but with Float the Root mode started to be
used for things like determining if we could flush hoistable elements
yet. In issue #27177 we see that hoisted elements can appear before the
<html> tag when using a legacy API `renderToString`.
This change exports a DOCTYPE from FizzConfigDOM and FizzConfigDOMLegacy
respectively, using an empty chunk in the legacy case. The only runtime
perf cost here is that for legacy APIs there is an extra empty chunk to
write when rendering a top level <html> tag which is trivial enough
Fixes#27177
Stacked on #27224
### Implements `ReactDOM.preloadModule()`
`preloadModule` is a function to preload modules of various types.
Similar to `preload` this is useful when you expect to use a Resource
soon but can't render that resource directly. At the moment the only
sensible module to preload is script modules along with some other `as`
variants such as `as="serviceworker"`. In the future when there is some
notion of how to preload style module script or json module scripts this
API will be extended to support those as well.
##### Arguments
1. `href: string` -> the href or src value you want to preload.
2. `options?: {...}` ->
2.1. `options.as?: string` -> the `as` property the modulepreload link
should render with. If not provided it will be omitted which will cause
the modulepreload to be treated like a script module
2.2. `options.crossOrigin?: string` -> modules always load with CORS but
you can provide `use-credentials` if you want to change the default
behavior
2.3. `options.integrity?: string` -> an integrity hash for subresource
integrity APIs
##### Rendering
each preloaded module will emit a `<link rel="modulepreload" href="..."
/>`
if `as` is specified and is something other than `"script"` the as
attribute will also be included
if crossOrigin or integrity as specified their attributes will also be
included
During SSR these script tags will be emitted before content. If we have
not yet flushed the document head they will be emitted there after
things that block paint such as font preloads, img preloads, and
stylesheets.
On the client these link tags will be appended to the document.head.
### Implements `ReactDOM.preinitModule()`
`preinitModule` is a function to loading module scripts before they are
required. It has the same use cases as `preinit`.
During SSR you would use this to tell the browsers to start fetching
code that will be used without having to wait for bootstrapping to
initiate module fetches.
ON the client you would use this to start fetching a module script early
for an anticipated navigation or other event that is likely to depend on
this module script.
the `as` property for Float methods drew inspiration from the `as`
attribute of the `<link rel="preload" ... >` tag but it is used as a
sort of tag for the kind of thing being targetted by Float methods. For
`preinitModule` we currently only support `as: "script"` and this is
also the assumed default type so you current never need to specify this
`as` value. In the future `preinitModule` will support additional module
script types such as `style` or `json`. The support of these types will
correspond to [Module Import
Attributes](https://github.com/tc39/proposal-import-attributes).
##### Arguments
1. `href: string` -> the href or src value you want to preinitialize
2. `options?: {...}` ->
2.1 `options.as?: string` -> only supports `script` and this is the
default behavior. Until we support import attributes such as `json` and
`style` there will not be much reason to provide an `as` option.
2.2. `options.crossOrigin?: string`: modules always load with CORS but
you can provide `use-credentials` if you want to change the default
behavior
2.3 `options.integrity?: string` -> an integrity hash for subresource
integrity APIs
##### Rendering
each preinitialized `script` module will emit a `<script type="module"
async="" src"...">` During SSR these will appear behind display blocking
resources such as font preloads, img preloads, and stylesheets. In the
browser these will be appende to the head.
Note that for other `as` types the rendered output will be slightly
different. `<script type="module">import "..." with {type: "json"
}</script>`. Since this tag is an inline script variants of React that
do not use inline scripts will simply omit these preinitialization tags
from the SSR output. This is not implemented in this PR but will appear
in a future update.
stacked on #27222
When I initially developed Float I was trying to be extremely clever in
how to explain when there are mismatching Resource instances. I still
think that we should do some kind of validation here but I want to
implement something much simpler. In practice there are not many cases
where you would accidentally create the same resource twice but with
differing props. Since I am going to land `preloadModule` and
`preinitModule` soon and I want to avoid adding to the overly complex
dev validation there I am going to remove it now and add something later
that is simplified.
Data URI's in images can't effectively be preloaded (the URI contains
the data so preloading only duplicates the data in the stream. If we
encounter an image with this protocol in the src attribute we should
avoid preloading it.
imageSrcSet should have been srcSet when referencing an img tag.
imageSizes should have been sizes. This caused preloads for img tags
using srcSet and sizes to incorrectly render as having a href only,
dropping the srcSet and sizes part of the preload
Eventually we will treat images without `loading="lazy"` as suspensey
meaning we will coordinate the reveal of boundaries when these images
have loaded and ideally decoded. As a step in that direction this change
prioritizes these images for preloading to ensure the highest chance
that they are loaded before boundaries reveal (or initial paint). every
img rendered that is non lazy loading will emit a preload just behind
fonts.
This change implements a new resource queue for high priority image
preloads
There are a number of scenarios where we end up putting a preload in
this queue
1. If you render a non-lazy image and there are fewer than 10 high
priority image preloads
2. if you render a non-lazy image with fetchPriority "high"
3. if you preload as "image" with fetchPriority "high"
This means that by default we won't overrsaturate this queue with every
img rendered on the page but the earlier encountered ones will go first.
Essentially this is React's own implementation of fetchPriority="auto".
If however you specify that the fetchPriority is higher then in theory
an unlimited number of images can preload in this queue. This gives
users some control over queuing while still providing a good default
that does not require any opting into
Additionally we use fetchPriority "low" as a signal that an image does
not require preloading. This may end up being pointless if not using
lazy (which also opts out of preloading) because it might delay initial
paint but we'll start with this hueristic and consider changes in the
future when we have more information
Currently React attempts to prioritize certain preloads over others
based on their type. This is at odds with allowing the user to control
priority by ordering which calls are made first. There are some asset
types that generally should just be prioritized first such as fonts
since we don't know when fonts will be used and they either block
display or may lead to fallback fonts being used. But for scripts and
stylesheets we can emit them in the order received with other arbitrary
preload types.
We will eventually add support for emitting suspensey image preloads
before other resources because these also block display however that
implementation will look at which images are actually rendered rather
than simply preloaded.
Generally scripts should not be preloaded before images but if they
arrive earlier than image preloads (or images) the network (or server)
may be saturated responding to inflight script preloads and not
sufficiently prioritize images arriving later. This change marks the
preloaded bootstrap script with a `low` fetch priority to signal to
supporting browsers that the request should be deprioritized. This
should make the preload operate similar to async script fetch priority
which is low by default according to https://web.dev/fetch-priority/
Additionally the bootstrap script preloads will emit before
preinitialized scripts do. Normal script preloads will continue to be
prioritized after stylesheets
This change can land separatrely but is part of a larger effort to
implement elevating image loading and making script loading less
blocking. Later changes will emit used suspensey images earlier in the
queue and will stop favoring scripts over images that are explicitly
preloaded
Fixes: #27200
preloads for images that appear before the viewport meta may be loaded
twice because the proper device image information is not used with the
preload but is with the image itself. The viewport meta should be
emitted earlier than all preloads to avoid this.
this change moves the queue for the viewport meta to preconnects which
already has the right priority for this tag
For float methods the href argument is usually all we need to uniquely
key the request. However when preloading responsive images it is
possible that you may need more than one preload for differing
imagesizes attributes. When using imagesrcset for preloads the href
attribute acts more like a fallback href. For keying purposes the
imagesrcset becomes the primary key conceptually.
This change updates the keying logic for `ReactDOM.preload()` when you
pass `{as: "image"}`
1. If `options.imageSrcSet` is a non-emtpy string the key is defined as
`options.imageSrcSet + options.imageSizes`. The `href` argument is still
required but does not participate in keying.
2. If `options.imageSrcSet` is empty, missing, or an invalid format the
key is defined as the `href`. Changing the `options.imageSizes` does not
affect the key as this option is inert when not using
`options.imageSrcSet`
Additionally, currently there is a bug in webkit (Safari) that causes
preload links to fail to use imageSrcSet and fallback to href even when
the browser will correctly resolve srcset on an `<img>` tag. Because the
drawbacks of preloading the wrong image (href over imagesrcset) in a
modern browser outweight the drawbacks of not preloading anything for
responsive images in browsers that do not support srcset at all we will
omit the `href` attribute whenever `options.imageSrcSet` is provided. We
still require you provide an href since we want to be able to revert
this behavior once all major browsers support it
bug link: https://bugs.webkit.org/show_bug.cgi?id=231150
Some browsers, with some CSP configuration, will not preload a script if
the prelaod link tag does not provide a valid nonce attribute. This
change adds the ability to specify a nonce for `ReactDOM.preload(..., {
as: "script" })`
Float types are currently spread out. this moves them to a single place
to ensure we properly handle the public type interface in all three
renderers.
This is a step towards moving the public interface and validation to a
common file shared by all three runtimes. Will also probably change the
function interface to be flatter
Currently we preload all scripts that are not hoisted. One of the
original reasons for this is we stopped SSR rendering async scripts that
had an onLoad/onError because we needed to be able to distinguish
between Float scripts and non-Float scripts during hydration. Hydration
has been refactored a bit and we can not get around this limitation so
we can just emit the async script in place. However, sync and defer
scripts are also preloaded. While this is sometimes desirable it is not
universally so and there are issues with conveying priority properly
(see fetchpriority) so with this change we remove the automatic
preloading of non-Float scripts altogether.
For this change to make sense we also need to emit async scripts with
loading handlers during SSR. we previously only preloaded them during
SSR because it was necessary to keep async scripts as unambiguously
resources when hydrating. One ancillary benefit was that load handlers
would always fire b/c there was no chance the script would run before
hydration. With this change we go back to having the ability to have
load handlers fired before hydration. This is already a problem with
images and we don't have a generalized solution for it however our
likely approach to this sort of thing where you need to wait for a
script to load is to use something akin to `importScripts()` rather than
rendering a script with onLoad.
We previously preloaded stylesheets that were rendered in Fizz. The idea
was we'd get a headstart fetching these resources since we know they are
going to be rendered. However to really be effective non-float
stylesheets need to rendered in the head and the preload here is not
helpful and potentially hurtful to perf in a minor way. This change
removes this functionality to make the code smaller and simpler
stacked on #26753
Adds support for preloading bootstrapModules. We don't yet support
modules in Float's public interface but this implementation should be
compatible with what we do when we add it.
This PR adds a preload for bootstrapScripts. preloads are captured
synchronously when you create a new Request and as such the normal logic
to check if a preload already exists is skipped.
Currently when React generates rel=preload link tags for script/stylesheet resources, it will not carryover nonce and fetchpriority values if specified on the original elements.
This change ensures that the preload links use the nonce and fetchPriority values if they were specified.
This automatically exposes `$$FORM_ACTIONS` on Server References coming
from Flight. So that when they're used in a form action, we can encode
the ID for the server reference as a hidden field or as part of the name
of a button.
If the Server Action is a bound function it can have complex data
associated with it. In this case this additional data is encoded as
additional form fields.
To process a POST on the server there's now a `decodeAction` helper that
can take one of these progressive posts from FormData and give you a
function that is prebound with the correct closure and FormData so that
you can just invoke it.
I updated the fixture which now has a "Server State" that gets
automatically refreshed. This also lets us visualize form fields.
There's no "Action State" here for showing error messages that are not
thrown, that's still up to user space.
Usually we don't have to do this since we only set these in the loop but
the ReactCustomFormAction props are optional so they might be undefined.
Also moved it to a general type since it's a semi-public API.
Stacked on top of #26735.
This allows a framework to add a `$$FORM_ACTION` property to a function.
This lets the framework return a set of props to use in place of the
function but only during SSR. Effectively, this lets you implement
progressive enhancement of form actions using some other way instead of
relying on the replay feature.
This will be used by RSC on Server References automatically by
convention in a follow up, but this mechanism can also be used by other
frameworks/libraries.
in https://github.com/facebook/react/pull/26738 we added nonce to the
ResponseState. Initially it was used in a variety of places but the
version that got merged only included it with the external fizz runtime.
This PR updates the config for the external fizz runtime so that the
nonce is encoded into the script chunks at request creation time.
The rationale is that for live-requests, streaming is more likely than
not so doing the encoding work at the start is better than during flush.
For cases such as SSG where the runtime is not required the extra
encoding is tolerable (not a live request). Bots are an interesting case
because if you want fastest TTFB you will end up requiring the runtime
but if you are withholding until the stream is done you have already
sacrificed fastest TTFB and the marginal slowdown of the extraneous
encoding is hopefully neglibible
I'm writing this so later if we learn that this tradeoff isn't worth it
we at least understand why I made the change in the first place.
Currently there is no way to provide a nonce when using
`ReactDOM.preinit(..., { as: 'script' })`
This PR adds `nonce?: string` as an option
While implementing this PR I added a test to also show you can pass
`integrity`. This test isn't directly related to the nonce change.
This hook reads the status of its ancestor form component, if it exists.
```js
const {pending, data, action, method} = useFormStatus();
```
It can be used to implement a loading indicator, for example. You can
think of it as a shortcut for implementing a loading state with the
useTransition hook.
For now, it's only available in the experimental channel. We'll share
docs once its closer to being stable. There are additional APIs that
will ship alongside it.
Internally it's implemented using startTransition + a context object.
That's a good way to think about its behavior, but the actual
implementation details may change in the future.
Because form elements cannot be nested, the implementation in the
reconciler does not bother to keep track of multiple nested "transition
providers". So although it's implemented using generic Fiber config
methods, it does currently make some assumptions based on React DOM's
requirements.
I found a couple scenarios where preloads were issued too aggressively
1. During SSR, if you render a new stylesheet after the preamble flushed
it will flush a preload even if the resource was already preloaded
2. During Client render, if you call `ReactDOM.preload()` it will only
check if a preload exists in the Document before inserting a new one. It
should check for an underlying resource such as a stylesheet link or
script if the preload is for a recognized asset type
We used to have Event Replaying for any kind of Discrete event where
we'd track any event after hydrateRoot and before the async code/data
has loaded in to hydrate the target. However, this didn't really work
out because code inside event handlers are expected to be able to
synchronously read the state of the world at the time they're invoked.
If we replay discrete events later, the mutable state around them like
selection or form state etc. may have changed.
This limitation doesn't apply to Client Actions:
- They're expected to be async functions that themselves work
asynchronously. They're conceptually also in the "navigation" events
that happen after the "submit" events so they're already not
synchronously even before the first `await`.
- They're expected to operate mostly on the FormData as input which we
can snapshot at the time of the event.
This PR adds a bit of inline script to the Fizz runtime (or external
runtime) to track any early submit events on the page - but only if the
action URL is our placeholder `javascript:` URL. We track a queue of
these on `document.$$reactFormReplay`. Then we replay them in order as
they get hydrated and we get a handle on the Client Action function.
I add the runtime to the `bootstrapScripts` phase in Fizz which is
really technically a little too late, because on a large page, it might
take a while to get to that script even if you have displayed the form.
However, that's also true for external runtime. So there's a very short
window we might miss an event but it's good enough and better than
risking blocking display on this script.
The main thing that makes the replaying difficult to reason about is
that we can have multiple instance of React using this same queue. This
would be very usual but you could have two different Reacts SSR:ing
different parts of the tree and using around the same version. We don't
have any coordinating ids for this. We could stash something on the form
perhaps but given our current structure it's more difficult to get to
the form instance in the commit phase and a naive solution wouldn't
preserve ordering between forms.
This solution isn't 100% guaranteed to preserve ordering between
different React instances neither but should be in order within one
instance which is the common case.
The hard part is that we don't know what instance something will belong
to until it hydrates. So to solve that I keep everything in the original
queue while we wait, so that ordering is preserved until we know which
instance it'll go into. I ended up doing a bunch of clever tricks to
make this work. These could use a lot more tests than I have right now.
Another thing that's tricky is that you can update the action before
it's replayed but we actually want to invoke the old action if that
happens. So we have to extract it even if we can't invoke it right now
just so we get the one that was there during hydration.
Stacked on #26557
Supporting Float methods such as ReactDOM.preload() are challenging for
flight because it does not have an easy means to convey direct
executions in other environments. Because the flight wire format is a
JSON-like serialization that is expected to be rendered it currently
only describes renderable elements. We need a way to convey a function
invocation that gets run in the context of the client environment
whether that is Fizz or Fiber.
Fiber is somewhat straightforward because the HostDispatcher is always
active and we can just have the FlightClient dispatch the serialized
directive.
Fizz is much more challenging becaue the dispatcher is always scoped but
the specific request the dispatch belongs to is not readily available.
Environments that support AsyncLocalStorage (or in the future
AsyncContext) we will use this to be able to resolve directives in Fizz
to the appropriate Request. For other environments directives will be
elided. Right now this is pragmatic and non-breaking because all
directives are opportunistic and non-critical. If this changes in the
future we will need to reconsider how widespread support for async
context tracking is.
For Flight, if AsyncLocalStorage is available Float methods can be
called before and after await points and be expected to work. If
AsyncLocalStorage is not available float methods called in the sync
phase of a component render will be captured but anything after an await
point will be a noop. If a float call is dropped in this manner a DEV
warning should help you realize your code may need to be modified.
This PR also introduces a way for resources (Fizz) and hints (Flight) to
flush even if there is not active task being worked on. This will help
when Float methods are called in between async points within a function
execution but the task is blocked on the entire function finishing.
This PR also introduces deduping of Hints in Flight using the same
resource keys used in Fizz. This will help shrink payload sizes when the
same hint is attempted to emit over and over again
This lets you pass a function to `<form action={...}>` or `<button
formAction={...}>` or `<input type="submit formAction={...}>`. This will
behave basically like a `javascript:` URL except not quite implemented
that way. This is a convenience for the `onSubmit={e => {
e.preventDefault(); const fromData = new FormData(e.target); ... }`
pattern.
You can still implement a custom `onSubmit` handler and if it calls
`preventDefault`, it won't invoke the action, just like it would if you
used a full page form navigation or javascript urls. It behaves just
like a navigation and we might implement it with the Navigation API in
the future.
Currently this is just a synchronous function but in a follow up this
will accept async functions, handle pending states and handle errors.
This is implemented by setting `javascript:` URLs, but these only exist
to trigger an error message if something goes wrong instead of
navigating away. Like if you called `stopPropagation` to prevent React
from handling it or if you called `form.submit()` instead of
`form.requestSubmit()` which by-passes the `submit` event. If CSP is
used to ban `javascript:` urls, those will trigger errors when these
URLs are invoked which would be a different error message but it's still
there to notify the user that something went wrong in the plumbing.
Next up is improving the SSR state with action replaying and progressive
enhancement.
Sebastian Markbåge
Josh Story
Steven
Henrique Limas
Yen-Wei Liu
Dan Ott
Andrew Clark