* expose unstable_interact for batching actions in tests
* move to TestUtils
* move it all into testutils
* s/interact/act
* warn when calling hook-like setState outside batching mode
* pass tests
* merge-temp
* move jsdom test to callsite
* mark failing tests
* pass most tests (except one)
* augh IE
* pass fuzz tests
* better warning, expose the right batchedUpdates on TestRenderer for www
* move it into hooks, test for dom
* expose a flag on the host config, move stuff around
* rename, pass flow
* pass flow... again
* tweak .act() type
* enable for all jest environments/renderers; pass (most) tests.
* pass all tests
* expose just the warning from the scheduler
* don't return values
* a bunch of changes.
can't return values from .act
don't try to await .act calls
pass tests
* fixes and nits
* "fire events that udpates state"
* nit
* 🙄
* my bad
* hi andrew
(prettier fix)
* Avoid importing Scheduler directly
The reconciler should not depend directly on Scheduler. This adds it to
the host config for the renderer instead.
(Except for `scheduler/tracing` imports, which are used only by the
profiling build. I've left those imports as-is, though I'm open to
directing those through the host config, too.)
* Make throwaway root id longer to appease Brian
* Improve Reducer Hook's lazy init API
* Use generic type for initilizer input
Still requires an `any` cast in the case where `init` function is
not provided.
* Move DEV-only function right above where it's used
I don't like looking at this top-level function #petty
* Use different dispatchers for functions & classes
Classes support readContext, but not any of the other dispatcher
methods. Function support all methods.
This is a more robust version of our previous strategy of checking
whether `currentlyRenderingFiber` is null.
As a next step, we can use a separate dispatcher for each phase of the
render cycle (mount versus update).
* Use separate dispatchers for mount and update
* Remove mount code from update path
Deletes mount-specific code from the update path, since it should be
unreachable. To continue supporting progressive enhancement (mounting
new hooks at the end of the list), we detect when there are no more
current hooks and switch back to the mount dispatcher. Progressive
enhancement isn't officially supported yet, so it will continue to warn.
* Factoring nits
* Fix Flow
Had to cheat more than I would like
* More Flow nits
* Switch back to using a special dispatcher for nested hooks in DEV
In order for this strategy to work, I had to revert progressive
enhancement support (appending hooks to the end). It was previously a
warning but now it results in an error. We'll reconsider later.
* Always pass args to updateState and updateReducer
Even though the extra args are only used on mount, to ensure
type consistency.
* Turned enableHooks feature flag on everywhere
* Removed useHooks feature flag from tests (now that it's on by default)
* Remove useHooks feature flag entirely
Specifying the directory as part of the `repository` field in a `package.json`
allows third party tools to provide better support when working with monorepos.
For example, it allows them to correctly construct a commit diff for a specific
package.
This format was accepted by npm in https://github.com/npm/rfcs/pull/19.
Whenever we do this, Rollup needs to materialize this as an object.
This causes it to also add the Babel compatibility property which is
unnecessary bloat. However, since when we use these, we leak the object
this often also deopts any compiler optimizations.
If we really need an object we should export default an object.
Currently there is an exception for DOMTopLevelEventTypes since
listing out the imports is a PITA and it doesn't escape so it should
get properly inlined. We should probably move to a different pattern
to avoid this for consistency though.
* Add debug tools package
* Add basic implementation
* Implement inspection of the current state of hooks using the fiber tree
* Support useContext hooks inspection by backtracking from the Fiber
I'm not sure this is safe because the return fibers may not be current
but close enough and it's fast.
We use this to set up the current values of the providers.
* rm copypasta
* Use lastIndexOf
Just in case. I don't know of any scenario where this can happen.
* Support ForwardRef
* Add test for memo and custom hooks
* Support defaultProps resolution
* [scheduler] Deadline object -> shouldYield
Instead of using a requestIdleCallback-style deadline object, expose a
method Scheduler.shouldYield that returns true if there's a higher
priority event in the queue.
* Nits
* [Synchronous Suspense] Suspending a class outside concurrent mode
When a class component suspends during mount outside concurrent mode,
change the tag so it's not mistaken for a completed component. For
example, we should not call componentWillUnmount if it is deleted.
* PR nits
* Allow arbitrary types to be wrapped in pure
This creates an outer fiber that container the pure check and an inner
fiber that represents which ever type of component.
* Add optimized fast path for simple pure function components
Special cased when there are no defaultProps and it's a simple function
component instead of class. This doesn't require an extra fiber.
We could make it so that this also works with custom comparer but that
means we have to go through one extra indirection to get to it.
Maybe it's worth it, donno.
* Introduce elementType field
This will be used to store the wrapped type of an element. E.g. pure and
lazy.
The existing type field will be used for the unwrapped type within them.
* Store the unwrapped type on the type field of lazy components
* Use the raw tags for lazy components
Instead, we check if the elementType and type are equal to test if
we need to resolve props. This is slightly slower in the normal case
but will yield less code and branching.
* Clean up lazy branches
* Collapse work tag numbering
* Split IndeterminateComponent out from Lazy
This way we don't have to check the type in a hacky way in the
indeterminate path. Also, lets us deal with lazy that resolves to
indeterminate and such.
* Missing clean up in rebase
* Store the start time on `updateQueue` instead of `stateNode`
Originally I did this to free the `stateNode` field to store a second
set of children. I don't we'll need this anymore, since we use fragment
fibers instead. But I still think using `updateQueue` makes more sense
so I'll leave this in.
* Use fragment fibers to keep the primary and fallback children separate
If the children timeout, we switch to showing the fallback children in
place of the "primary" children. However, we don't want to delete the
primary children because then their state will be lost (both the React
state and the host state, e.g. uncontrolled form inputs). Instead we
keep them mounted and hide them. Both the fallback children AND the
primary children are rendered at the same time. Once the primary
children are un-suspended, we can delete the fallback children — don't
need to preserve their state.
The two sets of children are siblings in the host environment, but
semantically, for purposes of reconciliation, they are two separate
sets. So we store them using two fragment fibers.
However, we want to avoid allocating extra fibers for every placeholder.
They're only necessary when the children time out, because that's the
only time when both sets are mounted.
So, the extra fragment fibers are only used if the children time out.
Otherwise, we render the primary children directly. This requires some
custom reconciliation logic to preserve the state of the primary
children. It's essentially a very basic form of re-parenting.
* Use `memoizedState` to store various pieces of SuspenseComponent's state
SuspenseComponent has three pieces of state:
- alreadyCaptured: Whether a component in the child subtree already
suspended. If true, subsequent suspends should bubble up to the
next boundary.
- didTimeout: Whether the boundary renders the primary or fallback
children. This is separate from `alreadyCaptured` because outside of
strict mode, when a boundary times out, the first commit renders the
primary children in an incomplete state, then performs a second commit
to switch the fallback. In that first commit, `alreadyCaptured` is
false and `didTimeout` is true.
- timedOutAt: The time at which the boundary timed out. This is separate
from `didTimeout` because it's not set unless the boundary
actually commits.
These were previously spread across several fields.
This happens to make the non-strict case a bit less hacky; the logic for
that special case is now mostly localized to the UnwindWork module.
* Hide timed-out Suspense children
When a subtree takes too long to load, we swap its contents out for
a fallback to unblock the rest of the tree. Because we don't want
to lose the state of the timed out view, we shouldn't actually delete
the nodes from the tree. Instead, we'll keep them mounted and hide
them visually. When the subtree is unblocked, we un-hide it, having
preserved the existing state.
Adds additional host config methods. For mutation mode:
- hideInstance
- hideTextInstance
- unhideInstance
- unhideTextInstance
For persistent mode:
- cloneHiddenInstance
- cloneUnhiddenInstance
- createHiddenTextInstance
I've only implemented the new methods in the noop and test renderers.
I'll implement them in the other renderers in subsequent commits.
* Include `hidden` prop in noop renderer's output
This will be used in subsequent commits to test that timed-out children
are properly hidden.
Also adds getChildrenAsJSX() method as an alternative to using
getChildren(). (Ideally all our tests would use test renderer #oneday.)
* Implement hide/unhide host config methods for DOM renderer
For DOM nodes, we hide using `el.style.display = 'none'`.
Text nodes don't have style, so we hide using `text.textContent = ''`.
* Implement hide/unhide host config methods for Art renderer
* Create DOM fixture that tests state preservation of timed out content
* Account for class components that suspend outside concurrent mode
Need to distinguish mount from update. An unfortunate edge case :(
* Fork appendAllChildren between persistent and mutation mode
* Remove redundant check for existence of el.style
* Schedule placement effect on indeterminate components
In non-concurrent mode, indeterminate fibers may commit in an
inconsistent state. But when they update, we should throw out the
old fiber and start fresh. Which means the new fiber needs a
placement effect.
* Pass null instead of current everywhere in mountIndeterminateComponent
* Jest + test renderer helpers for concurrent mode
Most of our concurrent React tests use the noop renderer. But most
of those tests don't test the renderer API, and could instead be
written with the test renderer. We should switch to using the test
renderer whenever possible, because that's what we expect product devs
and library authors to do. If test renderer is sufficient for writing
most React core tests, it should be sufficient for others, too. (The
converse isn't true but we should aim to dogfood test renderer as much
as possible.)
This PR adds a new package, jest-react (thanks @cpojer). I've moved
our existing Jest matchers into that package and added some new ones.
I'm not expecting to figure out the final API in this PR. My goal is
to land something good enough that we can start dogfooding in www.
TODO: Continue migrating Suspense tests, decide on better API names
* Add additional invariants to prevent common errors
- Errors if user attempts to flush when log of yields is not empty
- Throws if argument passed to toClearYields is not ReactTestRenderer
* Better method names
- toFlushAll -> toFlushAndYield
- toFlushAndYieldThrough ->
- toClearYields -> toHaveYielded
Also added toFlushWithoutYielding
* Fix jest-react exports
* Tweak README
* pure
A higher-order component version of the `React.PureComponent` class.
During an update, the previous props are compared to the new props. If
they are the same, React will skip rendering the component and
its children.
Unlike userspace implementations, `pure` will not add an additional
fiber to the tree.
The first argument must be a functional component; it does not work
with classes.
`pure` uses shallow comparison by default, like `React.PureComponent`.
A custom comparison can be passed as the second argument.
Co-authored-by: Andrew Clark <acdlite@fb.com>
Co-authored-by: Sophie Alpert <sophiebits@fb.com>
* Warn if first argument is not a functional component
* Merged interaction-tracking package into react-scheduler
* Add tracking API to FB+www builds
* Added Rollup plugin to strip no-side-effect imports from Rollup bundles
* Re-bundle tracking and scheduling APIs on SECRET_INTERNALS object for UMD build (and provide lazy forwarding methods)
* Added some additional tests and fixtures
* Fixed broken UMD fixture in master (#13512)
Dan Abramov
Rodrigo Ribeiro
Brian Vaughn
Sunil Pai
Andrew Clark
Brian Vaughn
Grey Baker
Yi-Shan, Chen
Dominic Gannaway
Sebastian Markbåge
Andrew Clark
Andrew Clark
Brian Ng
Héctor Ramos