## Summary
Moving towards deprecation of ReactTestRenderer. Log a warning on each
render so we can remove the exports in a future major version.
We can enable this flag in web RTR without disrupting RN tests by
flipping the flag in
`packages/shared/forks/ReactFeatureFlags.test-renderer.js`
## How did you test this change?
`yarn test
packages/react-test-renderer/src/__tests__/ReactTestRenderer-test.js`
## Summary
Changes the `enableComponentStackLocations` feature flag to be dynamic
for React Native (FB), so that it can be evaluated for compatibility
before eventually being enabled for React Native.
## How did you test this change?
I'll be importing this PR to test it.
When developing in an RSC environment, you should be able to work in a
single environment as if it was a unified environment. With thrown
errors we already serialize them and then rethrow them on the client.
Since by default we log them via onError both in Flight and Fizz, you
can get the same log in the RSC runtime, the SSR runtime and on the
client.
With console logs made in SSR renders, you typically replay the same
code during hydration on the client. So for example warnings already
show up both in the SSR logs and on the client (although not guaranteed
to be the same). You could just spend your time in the client and you'd
be fine.
Previously, RSC logs would not be replayed because they don't hydrate.
So it's easy to miss warnings for example.
With this approach, we replay RSC logs both during SSR so they end up in
the SSR logs and on the client. That way you can just stay in the
browser window during normal development cycles. You shouldn't have to
care if your component is a server or client component when working on
logical things or iterating on a product.
With this change, you probably should mostly ignore the Flight log
stream and just look at the client or maybe the SSR one. Unless you're
digging into something specific. In particular if you just naively run
both Flight and Fizz in the same terminal you get duplicates. I like to
run out fixtures `yarn dev:region` and `yarn dev:global` in two separate
terminals.
Console logs may contain complex objects which can be inspected. Ideally
a DevTools inspector could reach into the RSC server and remotely
inspect objects using the remote inspection protocol. That way complex
objects can be loaded on demand as you expand into them. However, that
is a complex environment to set up and the server might not even be
alive anymore by the time you inspect the objects. Therefore, I do a
best effort to serialize the objects using the RSC protocol but limit
the depth that can be rendered.
This feature is only own in dev mode since it can be expensive.
In a follow up, I'll give the logs a special styling treatment to
clearly differentiate them from logs coming from the client. As well as
deal with stacks.
Depends on:
- #28317
- #28320
---
Changes the behavior of the JSX runtime to pass through `ref` as a
normal prop, rather than plucking it from the props object and storing
on the element.
This is a breaking change since it changes the type of the receiving
component. However, most code is unaffected since it's unlikely that a
component would have attempted to access a `ref` prop, since it was not
possible to get a reference to one.
`forwardRef` _will_ still pluck `ref` from the props object, though,
since it's extremely common for users to spread the props object onto
the inner component and pass `ref` as a differently named prop. This is
for maximum compatibility with existing code — the real impact of this
change is that `forwardRef` is no longer required.
Currently, refs are resolved during child reconciliation and stored on
the fiber. As a result of this change, we can move ref resolution to
happen only much later, and only for components that actually use them.
Then we can remove the `ref` field from the Fiber type. I have not yet
done that in this step, though.
Previously, `<Context>` was equivalent to `<Context.Consumer>`. However,
since the introduction of Hooks, the `<Context.Consumer>` API is rarely
used. The goal here is to make the common case cleaner:
```js
const ThemeContext = createContext('light')
function App() {
return (
<ThemeContext value="dark">
...
</ThemeContext>
)
}
function Button() {
const theme = use(ThemeContext)
// ...
}
```
This is technically a breaking change, but we've been warning about
rendering `<Context>` directly for several years by now, so it's
unlikely much code in the wild depends on the old behavior. [Proof that
it warns today (check
console).](https://codesandbox.io/p/sandbox/peaceful-nobel-pdxtfl)
---
**The relevant commit is 5696782b428a5ace96e66c1857e13249b6c07958.** It
switches `createContext` implementation so that `Context.Provider ===
Context`.
The main assumption that changed is that a Provider's fiber type is now
the context itself (rather than an intermediate object). Whereas a
Consumer's fiber type is now always an intermediate object (rather than
it being sometimes the context itself and sometimes an intermediate
object).
My methodology was to start with the relevant symbols, work tags, and
types, and work my way backwards to all usages.
This might break tooling that depends on inspecting React's internal
fields. I've added DevTools support in the second commit. This didn't
need explicit versioning—the structure tells us enough.
This is a partial redo of https://github.com/facebook/react/pull/26625.
Since that was unlanded due to some detected breakages. This now
includes a feature flag to be careful in rolling this out.
Adds a feature flag to control whether the client cache function is just
a passthrough. before we land breaking changes for the next major it
will be off and then we can flag it on when we want to break it.
flag is off for OSS for now and on elsewhere (though the parent flag
enableCache is off in some cases)
Server Context was never documented, and has been deprecated in
https://github.com/facebook/react/pull/27424.
This PR removes it completely, including the implementation code.
Notably, `useContext` is removed from the shared subset, so importing it
from a React Server environment would now should be a build error in
environments that are able to enforce that.
Conceptually a Server Component in the tree is the same as a Client
Component.
When we render a Server Component with a key, that key should be used as
part of the reconciliation process to ensure the children's state are
preserved when they move in a set. The key of a child should also be
used to clear the state of the children when that key changes.
Conversely, if a Server Component doesn't have a key it should get an
implicit key based on the slot number. It should not inherit the key of
its children since the children don't know if that would collide with
other keys in the set the Server Component is rendered in.
A Client Component also has an identity based on the function's
implementation type. That mainly has to do with the state (or future
state after a refactor) that Component might contain. To transfer state
between two implementations it needs to be of the same state type. This
is not a concern for a Server Components since they never have state so
identity doesn't matter.
A Component returns a set of children. If it returns a single child,
that's the same as returning a fragment of one child. So if you
conditionally return a single child or a fragment, they should
technically reconcile against each other.
The simple way to do this is to simply emit a Fragment for every Server
Component. That would be correct in all cases. Unfortunately that is
also unfortunate since it bloats the payload in the common cases. It
also means that Fiber creates an extra indirection in the runtime.
Ideally we want to fold Server Component aways into zero cost on the
client. At least where possible. The common cases are that you don't
specify a key on a single return child, and that you do specify a key on
a Server Component in a dynamic set.
The approach in this PR treats a Server Component that returns other
Server Components or Lazy Nodes as a sequence that can be folded away.
I.e. the parts that don't generate any output in the RSC payload.
Instead, it keeps track of their keys on an internal "context". Which
gets reset after each new reified JSON node gets rendered.
Then we transfer the accumulated keys from any parent Server Components
onto the child element. In the simple case, the child just inherits the
key of the parent.
If the Server Component itself is keyless but a child isn't, we have to
add a wrapper fragment to ensure that this fragment gets the implicit
key but we can still use the key to reset state. This is unusual though
because typically if you keyed something it's because it was already in
a fragment.
In the case a Server Component is keyed but forks its children using a
fragment, we need to key that fragment so that the whole set can move
around as one. In theory this could be flattened into a parent array but
that gets tricky if something suspends, because then we can't send the
siblings early.
The main downside of this approach is that switching between single
child and fragment in a Server Component isn't always going to reconcile
against each other. That's because if we saw a single child first, we'd
have to add the fragment preemptively in case it forks later. This
semantic of React isn't very well known anyway and it might be ok to
break it here for pragmatic reasons. The tests document this
discrepancy.
Another compromise of this approach is that when combining keys we don't
escape them fully. We instead just use a simple `,` separated concat.
This is probably good enough in practice. Additionally, since we don't
encode the implicit 0 index slot key, you can move things around between
parents which shouldn't really reconcile but does. This keeps the keys
shorter and more human readable.
There's no need to separate strict mode from strict effects mode any
more.
I didn't clean up the `StrictEffectMode` fiber flag, because it's used
to prevent strict effects in legacy mode. I could replace those checks
with `LegacyMode` checks, but when we remove legacy mode, we can remove
that flag and condense them into one StrictMode flag away.
This wires up the use of `async_hooks` in the Node build (as well as the
Edge build when a global is available) in DEV mode only. This will be
used to track debug info about what suspended during an RSC pass.
Enabled behind a flag for now.
It seems worthwhile to me to run a test to experiment with different
expiration times. This moves the expiration times for scheduler and
reconciler into FeatureFlags for the facebook build. Non-facebook should
not be affected by these changes.
This PR adds a new FB-specific configuration of Flight. We also need to
bundle a version of ReactSharedSubset that will be used for running
Flight on the server.
This initial implementation does not support server actions yet.
The FB-Flight still uses the text protocol on the server (the flag
`enableBinaryFlight` is set to false). It looks like we need some
changes in Hermes to properly support this binary format.
An attempt to see if we can bring back expiration of retry lanes to
avoid cases resolving Suspense can be starved by frequent updates.
In the past, this caused increase browser crashes, but a lot of time has
passed since then. Just trying if we can re-enable this.
Old PR that reverted adding the timeout:
https://github.com/facebook/react/pull/21300
## Summary
Forget compiled code currently cannot be tested with ReactTestRender as
`useMemoCache` is not being set on the dispatcher. This PR ensures that
projects can execute unit tests with Forget compilation in the test
build pipeline.
```js
// source code
function Component(props) {
// ...
}
// transformed code, which also should be evaluated in unit tests
function Component(props) {
const $ = useMemoCache(...);
// ...
}
```
This PR enables the `enableUseMemoCacheHook` feature flag for all bundle
variations of ReactTestRenderer. Forget *should* be the only caller of
useMemoCache, so this should be a reversible change (in the event we
need to change the implementation or api of the hook).
## How did you test this change?
* Check that generated ReactTestRenderer bundles contain `useMemoCache`.
* Synced to Meta and checked that unit tests that use Forget +
@testing-library/react pass.
I did not add new tests to check that useMemoCache can be called when
using the test renderer as `useMemoCache` is not yet stable. Happy to
add a test case here if that would be helpful to reviewers though (I'm
guessing that would go in
`packages/react-test-renderer/src/__tests__/ReactTestRenderer-test.js` )
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
The flag has been tested internally on WWW, should be good to set to
true for OSS. Added a dynamic flag for fb RN.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
yarn test
Adds a second argument to useDeferredValue called initialValue:
```js
const value = useDeferredValue(finalValue, initialValue);
```
During the initial render of a component, useDeferredValue will return
initialValue. Once that render finishes, it will spawn an additional
render to switch to finalValue.
This same sequence should occur whenever the hook is hidden and revealed
again, i.e. by a Suspense or Activity, though this part is not yet
implemented.
When initialValue is not provided, useDeferredValue has no effect during
initial render, but during an update, it will remain on the previous
value, then spawn an additional render to switch to the new value. (This
is the same behavior that exists today.)
During SSR, initialValue is always used, if provided.
This feature is currently behind an experimental flag. We plan to ship
it in a non-breaking release.
## Summary
Currently when cloning nodes in Fabric, we reset a node's children on
each clone, and then repeatedly call appendChild to restore the previous
list of children (even if it was quasi-identical to before). This causes
unnecessary invalidation of the layout state in Fabric's ShadowNode data
(which in turn may require additional yoga clones) and extra JSI calls.
This PR adds a feature flag to pass in the children as part of the clone
call, so Fabric always has a complete view of the node that's being
mutated.
This feature flag requires matching changes in the react-native repo:
https://github.com/facebook/react-native/pull/39817
## How did you test this change?
Unit test added demonstrates the new behaviour
```
yarn test -r www-modern ReactFabric-test
yarn test ReactFabric-test.internal
```
Tested a manual sync into React Native and verified core surfaces render
correctly.
Upgrades the stability of Server Actions from experimental to canary.
- Turns on enableAsyncActions and enableFormActions
- Removes "experimental_" prefix from useOptimistic, useFormStatus, and
useFormState
This lets a registered object or value be "tainted", which we block from
crossing the serialization boundary. It's only allowed to stay
in-memory.
This is an extra layer of protection against mistakes of transferring
data from a data access layer to a client. It doesn't provide perfect
protection, because it doesn't trace through derived values and
substrings. So it shouldn't be used as the only security layer but more
layers are better.
`taintObjectReference` is for specific object instances, not any nested
objects or values inside that object. It's useful to avoid specific
objects from getting passed as is. It ensures that you don't
accidentally leak values in a specific context. It can be for security
reasons like tokens, privacy reasons like personal data or performance
reasons like avoiding passing large objects over the wire.
It might be privacy violation to leak the age of a specific user, but
the number itself isn't blocked in any other context. As soon as the
value is extracted and passed specifically without the object, it can
therefore leak.
`taintUniqueValue` is useful for high entropy values such as hashes,
tokens or crypto keys that are very unique values. In that case it can
be useful to taint the actual primitive values themselves. These can be
encoded as a string, bigint or typed array. We don't currently check for
this value in a substring or inside other typed arrays.
Since values can be created from different sources they don't just
follow garbage collection. In this case an additional object must be
provided that defines the life time of this value for how long it should
be blocked. It can be `globalThis` for essentially forever, but that
risks leaking memory for ever when you're dealing with dynamic values
like reading a token from a database. So in that case the idea is that
you pass the object that might end up in cache.
A request is the only thing that is expected to do any work. The
principle is that you can derive values from out of a tainted
entry during a request. Including stashing it in a per request cache.
What you can't do is store a derived value in a global module level
cache. At least not without also tainting the object.
## Summary
This is part of an effort to align the event loop in React Native with
its behavior on the Web. In this case, we're going to test enabling
microtasks in React Native (Fabric) and we need React to schedule work
using microtasks if available there. This just adds a feature flag to
configure that behavior at runtime.
## How did you test this change?
* Reviewed the generated code, which looks ok.
* Did a manual sync of this PR to Meta's internal infra and tested it
with my changes to enable microtasks in RN/Hermes.
This adds an experimental `unstable_postpone(reason)` API.
Currently we don't have a way to model effectively an Infinite Promise.
I.e. something that suspends but never resolves. The reason this is
useful is because you might have something else that unblocks it later.
E.g. by updating in place later, or by client rendering.
On the client this works to model as an Infinite Promise (in fact,
that's what this implementation does). However, in Fizz and Flight that
doesn't work because the stream needs to end at some point. We don't
have any way of knowing that we're suspended on infinite promises. It's
not enough to tag the promises because you could await those and thus
creating new promises. The only way we really have to signal this
through a series of indirections like async functions, is by throwing.
It's not 100% safe because these values can be caught but it's the best
we can do.
Effectively `postpone(reason)` behaves like a built-in [Catch
Boundary](https://github.com/facebook/react/pull/26854). It's like
`raise(Postpone, reason)` except it's built-in so it needs to be able to
be encoded and caught by Suspense boundaries.
In Flight and Fizz these behave pretty much the same as errors. Flight
just forwards it to retrigger on the client. In Fizz they just trigger
client rendering which itself might just postpone again or fill in the
value. The difference is how they get logged.
In Flight and Fizz they log to `onPostpone(reason)` instead of
`onError(error)`. This log is meant to help find deopts on the server
like finding places where you fall back to client rendering. The reason
that you pass in is for that purpose to help the reason for any deopts.
I do track the stack trace in DEV but I don't currently expose it to
`onPostpone`. This seems like a limitation. It might be better to expose
the Postpone object which is an Error object but that's more of an
implementation detail. I could also pass it as a second argument.
On the client after hydration they don't get passed to
`onRecoverableError`. There's no global `onPostpone` API to capture
postponed things on the client just like there's no `onError`. At that
point it's just assumed to be intentional. It doesn't have any `digest`
or reason passed to the client since it's not logged.
There are some hacky solutions that currently just tries to reuse as
much of the existing code as possible but should be more properly
implemented.
- Fiber is currently just converting it to a fake Promise object so that
it behaves like an infinite Promise.
- Fizz is encoding the magic digest string `"POSTPONE"` in the HTML so
we know to ignore it but it should probably just be something neater
that doesn't share namespace with digests.
Next I plan on using this in the `/static` entry points for additional
features.
Why "postpone"? It's basically a synonym to "defer" but we plan on using
"defer" for other purposes and it's overloaded anyway.
## Summary
This was not exposed as a dynamic flag in the build for facebook www. By
adding it, we'll be able to roll this out incrementally before cleaning
up this code altogether.
## How did you test this change?
`yarn build`
Before changes, `disableSchedulerTimeoutInWorkLoop` flag is not included
in ReactDOM-* build output for facebook www. Afterwards, it is included.
This uses the same mechanism as [large
strings](https://github.com/facebook/react/pull/26932) to encode chunks
of length based binary data in the RSC payload behind a flag.
I introduce a new BinaryChunk type that's specific to each stream and
ways to convert into it. That's because we sometimes need all chunks to
be Uint8Array for the output, even if the source is another array buffer
view, and sometimes we need to clone it before transferring.
Each type of typed array is its own row tag. This lets us ensure that
the instance is directly in the right format in the cached entry instead
of creating a wrapper at each reference. Ideally this is also how
Map/Set should work but those are lazy which complicates that approach a
bit.
We assume both server and client use little-endian for now. If we want
to support other modes, we'd convert it to/from little-endian so that
the transfer protocol is always little-endian. That way the common
clients can be the fastest possible.
So far this only implements Server to Client. Still need to implement
Client to Server for parity.
NOTE: This is the first time we make RSC effectively a binary format.
This is not compatible with existing SSR techniques which serialize the
stream as unicode in the HTML. To be compatible, those implementations
would have to use base64 or something like that. Which is what we'll do
when we move this technique to be built-in to Fizz.
## Summary
This PR cleans up `useMutableSource`. This has been blocked by a
remaining dependency internally at Meta, but that has now been deleted.
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
## How did you test this change?
```
yarn flow
yarn lint
yarn test --prod
```
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
We are upgrading React 17 codebase to React18, and `StrictMode` has been
great for surfacing potential production bugs on React18 for class
components. There are non-trivial number of test failures caused by
double `useEffect` in StrictMode. To prioritize surfacing and fixing
issues that will break in production now, we need a flag to turn off
double `useEffect` for now in StrictMode temporarily. This is a
Meta-only hack for rolling out `createRoot` and we will fast follow to
remove it and use full strict mode.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
jest
## Overview
Does a few things:
- Renames `enableSyncDefaultUpdates` to
`forceConcurrentByDefaultForTesting`
- Changes the way it's used so it's dead-code eliminated separate from
`allowConcurrentByDefault`
- Deletes a bunch of the gated code
The gates that are deleted are unnecessary now. We were keeping them
when we originally thought we would come back to being concurrent by
default. But we've shifted and now sync-by default is the desired
behavior long term, so there's no need to keep all these forked tests
around.
I'll follow up to delete more of the forked behavior if possible.
Ideally we wouldn't need this flag even if we're still using
`allowConcurrentByDefault`.
useMemoCache wasn't previously supported in the DevTools, so any attempt
to inspect a component using the hook would result in a
`dispatcher.useMemoCache is not a function (it is undefined)` error.
This is enabled in the canary channels, but because it's relatively
untested, we'll disable it at Meta until they're ready to start trying
it out. It can change some behavior even if you don't intentionally
start using the API.
The reason it's not a dynamic flag is that it affects the external Fizz
runtime, which currently can't read flags at runtime.
This puts the change introduced by #26611 behind a flag until Meta is
able to roll it out. Disabling the flag reverts back to the old
behavior, where retries are throttled if there's still data remaining in
the tree, but not if all the data has finished loading.
The new behavior is still enabled in the public builds.
Dan Abramov
Ricky
Jack Pope
Timothy Yung
Sebastian Markbåge
Andrew Clark
dan
Jan Kassens
Samuel Susla
Josh Story
Sebastian Silbermann
Andrey Lunyov
mofeiZ
Tianyu Yao
Pieter De Baets
Rubén Norte
Sophie Alpert
Noah Lemen
lauren