Stacked on #34546.
Same as #34538 but for gestures.
Includes various fixes.
This shows how it ends with a Transition when you release in the
committed state. Note how the Animation of the Gesture continues until
the Transition is done so that the handoff is seamless.
<img width="853" height="134" alt="Screenshot 2025-09-20 at 7 37 29 PM"
src="https://github.com/user-attachments/assets/6192a033-4bec-43b9-884b-77e3a6f00da6"
/>
If there is a large owner stack, we could potentially spam multiple
fetch requests for the same source map. This adds a simple deduplication
logic, based on URL.
Also, this adds a timeout of 60 seconds to all fetch requests initiated
by fileFetcher content script.
The root instance doesn't have a canonical property so we were not
returning a public instance that we can call compareDocumentPosition on
when a Fragment had no other host parent in Fabric. In this case we need
to get the ReactNativeElement from the ReactNativeDocument.
I've also added test coverage for this case in DOM for consistency,
though it was already working there because we use DOM elements as root.
This same test will be copied to RN using Fantom.
Stacked on #34538.
Track the Task of the first ViewTransition that we detected as
animating. Use this as the Task as "Starting Animation", "Animating"
etc. That way you can see which ViewTransition spawned the Animation.
Although it's likely to be multiple.
<img width="757" height="393" alt="Screenshot 2025-09-19 at 10 19 18 PM"
src="https://github.com/user-attachments/assets/a6cdcb89-bd02-40ec-b3c3-11121c29e892"
/>
Stacked on #34522.
<img width="1025" height="200" alt="Screenshot 2025-09-19 at 6 37 28 PM"
src="https://github.com/user-attachments/assets/f25900f6-6503-48b1-876d-bd6697a29c6f"
/>
We already cover the time between "Starting Animation" and "Remaining
Effects" as "Animating". However, if the effects are forced then we can
still be animating after that. This fills in that gap.
This also fills in the gap if another render starts before the animation
finishes on the same track. It'll mark the blank space between the
previous render finishing and the next render starting as "Animating".
This should correspond roughly to the native "Animations" track.
Stacked on #34511.
We currently log all Suspended Commit as "Suspended on Images or CSS"
but it can really be other reasons too now. Like waiting on the previous
View Transition. This allows the host config configure this reason.
Now when one animation starts before another one finishes we log that as
"Waiting for the previous Animation".
<img width="592" height="257" alt="Screenshot 2025-09-17 at 11 53 45 PM"
src="https://github.com/user-attachments/assets/817af8b5-37ae-46d8-bfd1-cd3fc637f3f3"
/>
If we are referencing a lazy value that isn't explicitly lazy ($L...)
it's because we added it around an element that was blocked to be able
to defer things inside.
However, once that is unblocked we can start unwrap it and just use the
inner element instead for any future reference. The race condition is
still there since it's a race condition whether we added the wrapper in
the first place.
This just makes it consistent with unwrapping of the rest of the path.
If we don't handle Lazy types specifically in `renderDebugModel`, all of
their properties will be emitted using `renderDebugModel` as well. This
also includes its `_debugInfo` property, if the Lazy comes from the
Flight client. That array might contain objects that are deduped, and
resolving those references in the client can cause runtime errors, e.g.:
```
TypeError: Cannot read properties of undefined (reading '$$typeof')
```
This happened specifically when an "RSC stream" debug info entry, coming
from the Flight client through IO tracking, was emitted and its
`debugTask` property was deduped, which couldn't be resolved in the
client.
To avoid actually initializing a lazy causing a side-effect, we make
some assumptions about the structure of its payload, and only emit
resolved or rejected values, otherwise we emit a halted chunk.
Stacked on #34510.
The "Commit" phase for a View Transition starts before the snapshot
phase (before mutation) and then stretches into the async gap of
`startViewTransition`, encompasses the mutation phase inside of its
update callback and finally the layout phase.
However, between the mutation phase and the layout phase we may suspend
the start of the view transition on fonts and/or images. In that case we
now split the Commit phase into first one before we suspend and then we
log "Waiting for Images and/or Fonts" and then another Commit phase
around the layout effects.
<img width="897" height="119" alt="Screenshot 2025-09-16 at 11 37 26 PM"
src="https://github.com/user-attachments/assets/0fe21388-bb48-4456-a594-62227d12d9b7"
/>
Stacked on #34509.
View Transitions introduces a bunch of new types of gaps in the commit
phase which needs to be logged differently in the performance track.
One thing that can happen is that a `flushSync` update forces the View
Transition to abort before it has started if it happens in the gap
before the transition is ready. In that case we log "Interrupted View
Transition".
Otherwise, when we're done in `startViewTransition` there's some work to
finalize the animations before the `ready` calllback. This is logged as
"Starting Animation".
Then there's a gap before the passive effects fire which we log as
"Animating". This can be long unless they're forced to flush early e.g.
due to another lane updating.
The "Animating" track should then pick up which doesn't do yet. This one
is tricky because this is after the actual commit phase and needs to be
interrupted by new renders which themselves can be suspended on the
animation finshing.
This PR is just a subset of all the cases. Will need a lot more work.
<img width="679" height="161" alt="Screenshot 2025-09-16 at 10 19 06 PM"
src="https://github.com/user-attachments/assets/0407372d-aaed-41f5-a262-059b2686ae87"
/>
This simplifies the logic for clamping the start times of various
phases. Instead of checking in multiple places I ensure we compute a
value for each phase that is then clamped to the next phase so they
don't overlap. If they're zero they're not printed.
I also added a name for all the anonymous labels. Those are mainly
fillers for sync work that should be quick but it helps debugging if we
can name them.
Finally the real fix is to update the clamp time which previously could
lead to overlapping entries for consecutive updates when a previous
update never finalized before the next update.
Stacked on #34486.
If we gave up on loading suspensey images for blocking the commit (e.g.
due to #34481), we can still block the view transition from committing
to allow an animation to include the image from the start.
At this point we have more information about the layout so we can
include only the images that are within viewport in the calculation
which may end up with a different answer.
This only applies when we attempt to run an animation (e.g. something
mutated inside a `<ViewTransition>` in a Transition). We could attempt a
`startViewTransition` if we gave up on the suspensey images just so that
we could block it even if no animation would be running.
However, this point the screen is frozen and you can no longer have sync
updates interrupt so ideally we would have already blocked the commit
from happening in the first place.
The reason to have two points where we block is that ideally we leave
the UI responsive while blocking, which blocking the commit does. In the
simple case of all images or a single image being within the viewport,
that's favorable. By combining the techniques we only end up freezing
the screen in the special case that we had a lot of images added outside
the viewport and started an animation with some image inside the
viewport (which presumably is about to finish anyway).
Stacked on #34481.
We currently track the suspended state temporarily with a global which
is safe as long as we always read it during a sync pass. However, we
sometimes read it in closures and then we have to be carefully to pass
the right one since it's possible another commit on a different root has
started at that point. This avoids this footgun.
Another reason to do this is that I want to read it in
`startViewTransition` which is in an async gap after which point it's no
longer safe. So I have to pass that through the `commitRoot` bound
function.
Stacked on #34478.
In general we don't like to deal with timeouts in suspense world. We've
had that in the past but in general it doesn't work well because if you
have a timeout and then give up you made everything wait longer for no
benefit at the end. That's why the recommendation is to remove a
Suspense boundary if you expect it to be fast and add one if you expect
it to be slow. You have to estimate as the developer.
Suspensey images suffer from this same problem. We want to apply
suspensey images to as much as possible so that it's the default to
avoid flashing because if just a few images flash it's still almost as
bad as all of them. However, we do know that it's also very common to
use images and on a slow connection or many images, it's not worth it so
we have the timeout to eventually give up.
However, this means that in cases that are always slow or connections
that are always slow, you're always punished for no reason.
Suspensey images is mainly a polish feature to make high end experiences
on high end connections better but we don't want to unnecessarily punish
all slow connections in the process or things like lots of images below
the viewport.
This PR adds an estimate for whether or not we'll likely be able to load
all the images within the timeout on a high end enough connection. If
not, we'll still do a short suspend (unless we've already exceeded the
wait time adjusted for #34478) to allow loading from cache if available.
This estimate is based on two heuristics:
1) We compute an estimated bandwidth available on the current device in
mbps. This is computed from performance entries that have loaded static
resources already on the site. E.g. this can be other images, css, or
scripts. We see how long they took. If we don't have any entries (or if
they're all cross-origin in Safari) we fallback to
`navigator.connection.downlink` in Chrome or a 5mbps default in
Firefox/Safari.
2) To estimate how many bytes we'll have to download we use the
width/height props of the img tag if available (or a 100 pixel default)
times the device pixel ratio. We assume that a good img implementation
downloads proper resolution image for the device and defines a
width/height up front to avoid layout trash. Then we estimate that it
takes about 0.25 bytes per pixel which is somewhat conservative
estimate.
This is somewhat conservative given that the image could've been
preloaded and be better compressed.
So it really only kicks in for high end connections that are known to
load fast.
In a follow up, we can add an additional wait for View Transitions that
does the same estimate but only for the images that turn out to be in
viewport.
Currently suspensey images doesn't account for how long we've already
been waiting. This means that you can for example wait for 300ms for the
throttle + 500ms for the images. If a Transition takes a while to
complete you can also wait that time + an additional 500ms for the
images.
This tracks the start time of a Transition so that we can count the
timeout starting from when the user interacted or when the last fallback
committed (which is where the 300ms throttle is computed from). Creating
a single timeline.
This also moves the timeout to a central place which I'll use in a
follow up.
## Overview
This PR ships `<Activity />` to the `react@canary` release channel for
final feedback and prepare for semver stable release.
## What this means
Shipping `<Activity />` to canary means it has gone through extensive
testing in production, we are confident in the stability of the feature,
and we are preparing to release it in a future semver stable version.
Libraries and frameworks following the [Canary
Workflow](https://react.dev/blog/2023/05/03/react-canaries) should begin
implementing and testing the feature.
## Why we follow the Canary Workflow
To prepare for semver stable, libraries should test canary features like
`<Activity>` with `react@canary` to confirm compatibility and prepare
for the next semver release in a myriad of environments and
configurations used throughout the React ecosystem. This provides
libraries with ample time to catch any issues we missed before slamming
them with problems in the wider semver release.
Since these features have already gone through extensive production
testing, and we are confident they are stable, frameworks following the
[Canary Workflow](https://react.dev/blog/2023/05/03/react-canaries) can
also begin adopting canary features like `<Activity />`.
This adoption is similar to how different Browsers implement new
proposed browser features before they are added to the standard. If a
frameworks adopts a canary feature, they are committing to stability for
their users by ensuring any API changes before a semver stable release
are opaque and non-breaking to their users.
Apps not using a framework are also free to adopt canary features like
Activity as long as they follow the [Canary
Workflow](https://react.dev/blog/2023/05/03/react-canaries), but we
generally recommend waiting for a semver stable release unless you have
the capacity to commit to following along with the canary changes and
debugging library compatibility issues.
Waiting for semver stable means you're able to benefit from libraries
testing and confirming support, and use semver as signal for which
version of a library you can use with support of the feature.
## Docs
Check out the ["React Labs: View Transitions, Activity, and
more"](https://react.dev/blog/2025/04/23/react-labs-view-transitions-activity-and-more#activity)
blog post, and [the new docs for
`<Activity>`](https://react.dev/reference/react/Activity) for more info.
## TODO
- [x] Bump Activity docs to Canary
https://github.com/reactjs/react.dev/pull/7974
---------
Co-authored-by: Sebastian Sebbie Silbermann <sebastian.silbermann@vercel.com>
When we report an error we typically log the owner stack of the thing
that caught the error. Similarly we restore the `console.createTask`
scope of the catching component when we call `reportError` or
`console.error`.
We also have a special case if something throws during reconciliation
which uses the Server Component task as far as we got before we threw.
https://github.com/facebook/react/blob/main/packages/react-reconciler/src/ReactChildFiber.js#L1952-L1960
Chrome has since fixed it (on our request) that the Error constructor
snapshots the Task at the time the constructor was created and logs that
in `reportError`. This is a good thing since it means we get a coherent
stack. Unfortunately, it means that the fake Errors that we create in
Flight Client gets a snapshot of the task where they were created so
when they're reported in the console they get the root Task instead of
the Task of the handler of the error.
Ideally we'd transfer the Task from the server and restore it. However,
since we don't instrument the Error object to snapshot the owner and we
can't read the native Task (if it's even enabled on the server) we don't
actually have a correct snapshot to transfer for a Server Component
Error. However, we can use the parent's task for where the error was
observed by Flight Server and then encode that as a pseudo owner of the
Error.
Then we use this owner as the Task which the Error is created within.
Now the client snapshots that Task which is reported by `reportError` so
now we have an async stack for Server Component errors again. (Note that
this owner may differ from the one observed by `captureOwnerStack` which
gets the nearest Server Component from where it was caught. We could
attach the owner to the Error object and use that owner when calling
`onCaughtError`/`onUncaughtError`).
Before:
<img width="911" height="57" alt="Screenshot 2025-09-10 at 10 57 54 AM"
src="https://github.com/user-attachments/assets/0446ef96-fad9-4e17-8a9a-d89c334233ec"
/>
After:
<img width="910" height="128" alt="Screenshot 2025-09-10 at 11 06 20 AM"
src="https://github.com/user-attachments/assets/b30e5892-cf40-4246-a588-0f309575439b"
/>
Similarly, there are Errors and warnings created by ChildFiber itself.
Those execute in the scope of the general render of the parent Fiber.
They used to get the scope of the nearest client component parent (e.g.
div in this case) but that's the parent of the Server Component. It
would be too expensive to run every level of reconciliation in its own
task optimistically, so this does it only when we know that we'll throw
or log an error that needs this context. Unfortunately this doesn't
cover user space errors (such as if an iterable errors).
Before:
<img width="903" height="298" alt="Screenshot 2025-09-10 at 11 31 55 AM"
src="https://github.com/user-attachments/assets/cffc94da-8c14-4d6e-9a5b-bf0833b8b762"
/>
After:
<img width="1216" height="252" alt="Screenshot 2025-09-10 at 11 50
54 AM"
src="https://github.com/user-attachments/assets/f85f93cf-ab73-4046-af3d-dd93b73b3552"
/>
<img width="412" height="115" alt="Screenshot 2025-09-10 at 11 52 46 AM"
src="https://github.com/user-attachments/assets/a76cef7b-b162-4ecf-9b0a-68bf34afc239"
/>
Requiring DevTools to be present for dev builds seems like an overkill,
let's enable the instrumentation by default.
Nothing changes for profiling or production artifacts.
When we emit objects of type `ReactAsyncInfo`, we need to make sure that
their owners are outlined, using `outlineComponentInfo`. Otherwise we
would end up accidentally emitting stashed fields that are not part of
the transport protocol, specifically `debugStack`, `debugTask`, and
`debugLocation`. This would lead to runtime errors in the client, when
for example, the stack for a `debugLocation` is processed in
`buildFakeCallStack`, but the stack was actually omitted from the RSC
payload, because for those fields we don't ensure that the object limit
is increased by the length of the stack, as we do when we're emitting
the `stack` of a `ReactComponentInfo` object in `outlineComponentInfo`.
When the search query changes, we kick off a transition that updates the
search query in a reducer for TreeContext. The search input is also
using this value for an `input` HTML element.
For a larger applications, sometimes there is a noticeable delay in
displaying the updated search query. This changes the approach to also
keep a local synchronous state that is being updated on a change
callback.
Stacked on #34435.
This adds a method to get all suspended by filtered by a specific
Instance. The purpose of this is to power the feature when you filter by
Activity. This would show you the "root" within that Activity boundary.
This works by selecting the nearest Suspense boundary parent and then
filtering its data based on if all the instances for a given I/O info is
within the Activity instance. If something suspended within the Suspense
boundary but outside the Activity it's not included even if it's also
suspending inside the Activity since we assume it would've already been
loaded then.
Right now I wire this up to be a special case when you select an
Activity boundary same as when you select a Suspense boundary in the
Components tab but we could also only use this when you select the root
in the Suspense tab for example.
