Follow up to #25084. Implements experimental_use(promise) API in
the Server Components runtime (Flight).
The implementation is much simpler than in Fiber because there is no
state. Even the "state" added in this PR — to track the result of each
promise across attempts — is reset as soon as a component
successfully renders without suspending.
There are also fewer caveats around neglecting to cache a promise
because the state of the promises is preserved even if we switch to a
different task.
Server Components is the primary runtime where this API is intended to
be used.
The last runtime where we need to implement this is the server renderer
(Fizz).
* Internal `act`: Unwrapping resolved promises
This update our internal implementation of `act` to support React's new
behavior for unwrapping promises. Like we did with Scheduler, when
something suspends, it will yield to the main thread so the microtasks
can run, then continue in a new task.
I need to implement the same behavior in the public version of `act`,
but there are some additional considerations so I'll do that in a
separate commit.
* Move throwException to after work loop resumes
throwException is the function that finds the nearest boundary and
schedules it for a second render pass. We should only call it right
before we unwind the stack — not if we receive an immediate ping and
render the fiber again.
This was an oversight in 8ef3a7c that I didn't notice because it happens
to mostly work, anyway. What made me notice the mistake is that
throwException also marks the entire render phase as suspended
(RootDidSuspend or RootDidSuspendWithDelay), which is only supposed to
be happen if we show a fallback. One consequence was that, in the
RootDidSuspendWithDelay case, the entire commit phase was blocked,
because that's the exit status we use to block a bad fallback
from appearing.
* Use expando to check whether promise has resolved
Add a `status` expando to a thrown thenable to track when its value has
resolved.
In a later step, we'll also use `value` and `reason` expandos to track
the resolved value.
This is not part of the official JavaScript spec — think of
it as an extension of the Promise API, or a custom interface that is a
superset of Thenable. However, it's inspired by the terminology used
by `Promise.allSettled`.
The intent is that this will be a public API — Suspense implementations
can set these expandos to allow React to unwrap the value synchronously
without waiting a microtask.
* Scaffolding for `experimental_use` hook
Sets up a new experimental hook behind a feature flag, but does not
implement it yet.
* use(promise)
Adds experimental support to Fiber for unwrapping the value of a promise
inside a component. It is not yet implemented for Server Components,
but that is planned.
If promise has already resolved, the value can be unwrapped
"immediately" without showing a fallback. The trick we use to implement
this is to yield to the main thread (literally suspending the work
loop), wait for the microtask queue to drain, then check if the promise
resolved in the meantime. If so, we can resume the last attempted fiber
without unwinding the stack. This functionality was implemented in
previous commits.
Another feature is that the promises do not need to be cached between
attempts. Because we assume idempotent execution of components, React
will track the promises that were used during the previous attempt and
reuse the result. You shouldn't rely on this property, but during
initial render it mostly just works. Updates are trickier, though,
because if you used an uncached promise, we have no way of knowing
whether the underlying data has changed, so we have to unwrap the
promise every time. It will still work, but it's inefficient and can
lead to unnecessary fallbacks if it happens during a discrete update.
When we implement this for Server Components, this will be less of an
issue because there are no updates in that environment. However, it's
still better for performance to cache data requests, so the same
principles largely apply.
The intention is that this will eventually be the only supported way to
suspend on arbitrary promises. Throwing a promise directly will
be deprecated.
* Skip double invoking effects in Offscreen
* Run yarn replace-fork
* Use executionContext to disable profiler timer
* Restructure recursion into two functions
* Fix ReactStrictMode test
* Use gate pragma in ReacetOffscreenStrictMode test
* Set and reset current debug fiber in dev
* Skip over paths that don't include any insertions
* Extract common logic to check for profiling to a helper function
* Remove hasPassiveEffects flag from StrictMode
* Fix flow issues
* Revert "Skip over paths that don't include any insertions"
The `version` field exported by the React package currently corresponds
to the `@next` release for that build. This updates the build script
to output the same version that is used in the package.json file.
It works by doing a find-and-replace of the React version after the
build has completed. This is a bit weird but it saves us from having
to build the `@next` and `@latest` releases separately; they are
identical except for the version numbers.
* Flight side of server context
* 1 more test
* rm unused function
* flow+prettier
* flow again =)
* duplicate ReactServerContext across packages
* store default value when lazily initializing server context
* .
* better comment
* derp... missing import
* rm optional chaining
* missed feature flag
* React.__SECRET_INTERNALS_DO_NOT_USE_OR_YOU_WILL_BE_FIRED ??
* add warning if non ServerContext passed into useServerContext
* pass context in as array of arrays
* make importServerContext nott pollute the global context state
* merge main
* remove useServerContext
* dont rely on object getters in ReactServerContext and disallow JSX
* add symbols to devtools + rename globalServerContextRegistry to just ContextRegistry
* gate test case as experimental
* feedback
* remove unions
* Lint
* fix oopsies (tests/lint/mismatching arguments/signatures
* lint again
* replace-fork
* remove extraneous change
* rebase
* 1 more test
* rm unused function
* flow+prettier
* flow again =)
* duplicate ReactServerContext across packages
* store default value when lazily initializing server context
* .
* better comment
* derp... missing import
* rm optional chaining
* missed feature flag
* React.__SECRET_INTERNALS_DO_NOT_USE_OR_YOU_WILL_BE_FIRED ??
* add warning if non ServerContext passed into useServerContext
* pass context in as array of arrays
* make importServerContext nott pollute the global context state
* merge main
* remove useServerContext
* dont rely on object getters in ReactServerContext and disallow JSX
* add symbols to devtools + rename globalServerContextRegistry to just ContextRegistry
* gate test case as experimental
* feedback
* remove unions
* Lint
* fix oopsies (tests/lint/mismatching arguments/signatures
* lint again
* replace-fork
* remove extraneous change
* rebase
* reinline
* rebase
* add back changes lost due to rebase being hard
* emit chunk for provider
* remove case for React provider type
* update type for SomeChunk
* enable flag with experimental
* add missing types
* fix flow type
* missing type
* t: any
* revert extraneous type change
* better type
* better type
* feedback
* change import to type import
* test?
* test?
* remove react-dom
* remove react-native-renderer from react-server-native-relay/package.json
* gate change in FiberNewContext, getComponentNameFromType, use switch statement in FlightServer
* getComponentNameFromTpe: server context type gated and use displayName if available
* fallthrough
* lint....
* POP
* lint
* Move createRoot/hydrateRoot to /client
We want these APIs ideally to be imported separately from things you
might use in arbitrary components (like flushSync). Those other methods
are "isomorphic" to how the ReactDOM tree is rendered. Similar to hooks.
E.g. importing flushSync into a component that only uses it on the client
should ideally not also pull in the entry client implementation on the
server.
This also creates a nicer parity with /server where the roots are in a
separate entry point.
Unfortunately, I can't quite do this yet because we have some legacy APIs
that we plan on removing (like findDOMNode) and we also haven't implemented
flushSync using a flag like startTransition does yet.
Another problem is that we currently encourage these APIs to be aliased by
/profiling (or unstable_testing). In the future you don't have to alias
them because you can just change your roots to just import those APIs and
they'll still work with the isomorphic forms. Although we might also just
use export conditions for them.
For that all to work, I went with a different strategy for now where the
real API is in / but it comes with a warning if you use it. If you instead
import /client it disables the warning in a wrapper. That means that if you
alias / then import /client that will inturn import the alias and it'll
just work.
In a future breaking changes (likely when we switch to ESM) we can just
remove createRoot/hydrateRoot from / and move away from the aliasing
strategy.
* Update tests to import from react-dom/client
* Fix fixtures
* Update warnings
* Add test for the warning
* Update devtools
* Change order of react-dom, react-dom/client alias
I think the order matters here. The first one takes precedence.
* Require react-dom through client so it can be aliased
Co-authored-by: Andrew Clark <git@andrewclark.io>
* add transition name to startTransition
Add a transitionName to start transition, store the transition start time and name in the batch config, and pass it to the root on render
* Transition Tracing Types and Consts
* Root begin work
The root operates as a tracing marker that has all transitions on it. This PR only tested the root with one transition so far
- Store transitions in memoizedState. Do this in updateHostRoot AND attemptEarlyBailoutIfNoScheduledUpdate. We need to do this in the latter part because even if the root itself doesn't have an update, it could still have new transitions in its transitionLanes map that we need to process.
* Transition Tracing commit phase
- adds a module scoped pending transition callbacks object that contains all transition callbacks that have not yet been processed. This contains all callbacks before the next paint occurs.
- Add code in the mutation phase to:
* For the root, if there are transitions that were initialized during this commit in the root transition lanes map, add a transition start call to the pending transition callbacks object. Then, remove the transitions from the root transition lanes map.
* For roots, in the commit phase, add a transition complete call
We add this code in the mutation phase because we can't add it to the passive phase because then the paint might have occurred before we even know which callbacks to call
* Process Callbacks after paint
At the end of the commit phase, call scheduleTransitionCallbacks to schedule all pending transition callbacks to be called after paint. Then clear the callbacks
* Remove object-assign polyfill
We really rely on a more modern environment where this is typically
polyfilled anyway and we don't officially support IE with more extensive
polyfilling anyway. So all environments should have the native version
by now.
* Use shared/assign instead of Object.assign in code
This is so that we have one cached local instance in the bundle.
Ideally we should have a compile do this for us but we already follow
this pattern with hasOwnProperty, isArray, Object.is etc.
* Transform Object.assign to now use shared/assign
We need this to use the shared instance when Object.spread is used.
I removed useMutableSource in a previous PR but forgot this one.
We still export it in the FB builds until we can migrate the internal
callers (Recoil).
This was already defeating the XSS issue that Symbols was meant to protect
against. So you were already supposed to use a polyfill for security.
We rely on real Symbol.for in Flight for Server Components so those require
real symbols anyway.
We also don't really support IE without additional polyfills anyway.
The unstable-shared-subset.js file is not a public module — it's a
private module that the "react" package maps to when it's accessed from
the "react-server" package.
We originally added it because it was required to make our Rollup
configuration work, because at the time only "public" modules could act
as the entry point for a build artifact — that's why it's prefixed with
"unstable". We've since updated our Rollup config to support private
entry points, so we can remove the extra indirection.
Previously, ReactBatchConfig.transition was an number (1 = there is a transition, 0 = there isn't one). This PR changes this to a transition object (object = there is a transition, null = there isn't one) in preparation for transition tracing changes.
- Add Tracing Marker component type to React exports
- Add reconciler work tag
- Add devtools work tag
- Add boilerplate for the cache to render children
No functionality yet
* Remove deprecated folder mapping
Node v16 deprecated the use of trailing "/" to define subpath folder
mappings in the "exports" field of package.json.
The recommendation is to explicitly list all our exports. We already do
that for all our public modules. I believe the only reason we have a
wildcard pattern is because our package.json files are also used at
build time (by Rollup) to resolve internal source modules that don't
appear in the final npm artifact.
Changing trailing "/" to "/*" fixes the warnings. See
https://nodejs.org/api/packages.html#subpath-patterns for more info.
Since the wildcard pattern only exists so our build script has access to
internal at build time, I've scoped the wildcard to "/src/*". Because
our public modules are located outside the "src" directory, this means
deep imports of our modules will no longer work: only packages that are
listed in the "exports" field.
The only two affected packages are react-dom and react. We need to be
sure that all our public modules are still reachable. I audited the
exports by comparing the entries to the "files" field in package.json,
which represents a complete list of the files that are included in the
final release artifact.
At some point, we should add an e2e packaging test to prevent
regressions; for now, we should have decent coverage because in CI we
run our Jest test suite against the release artifacts.
* Remove umd from exports
Our expectation is that if you're using the UMD builds, you're not
loading them through a normal module system like require or import.
Instead you're probably copying the files directly or loading them from
a CDN like unpkg.
* Add .browser and .node explicit entry points
This can be useful when the automatic selection doesn't work properly.
* Remove react/index
I'm not sure why I added this in the first place. Perhaps due to how our
builds work somehow.
* Remove build-info.json from files field
* Add useId to dispatcher
* Initial useId implementation
Ids are base 32 strings whose binary representation corresponds to the
position of a node in a tree.
Every time the tree forks into multiple children, we add additional bits
to the left of the sequence that represent the position of the child
within the current level of children.
00101 00010001011010101
╰─┬─╯ ╰───────┬───────╯
Fork 5 of 20 Parent id
The leading 0s are important. In the above example, you only need 3 bits
to represent slot 5. However, you need 5 bits to represent all the forks
at the current level, so we must account for the empty bits at the end.
For this same reason, slots are 1-indexed instead of 0-indexed.
Otherwise, the zeroth id at a level would be indistinguishable from
its parent.
If a node has only one child, and does not materialize an id (i.e. does
not contain a useId hook), then we don't need to allocate any space in
the sequence. It's treated as a transparent indirection. For example,
these two trees produce the same ids:
<> <>
<Indirection> <A />
<A /> <B />
</Indirection> </>
<B />
</>
However, we cannot skip any materializes an id. Otherwise, a parent id
that does not fork would be indistinguishable from its child id. For
example, this tree does not fork, but the parent and child must have
different ids.
<Parent>
<Child />
</Parent>
To handle this scenario, every time we materialize an id, we allocate a
new level with a single slot. You can think of this as a fork with only
one prong, or an array of children with length 1.
It's possible for the the size of the sequence to exceed 32 bits, the
max size for bitwise operations. When this happens, we make more room by
converting the right part of the id to a string and storing it in an
overflow variable. We use a base 32 string representation, because 32 is
the largest power of 2 that is supported by toString(). We want the base
to be large so that the resulting ids are compact, and we want the base
to be a power of 2 because every log2(base) bits corresponds to a single
character, i.e. every log2(32) = 5 bits. That means we can lop bits off
the end 5 at a time without affecting the final result.
* Incremental hydration
Stores the tree context on the dehydrated Suspense boundary's state
object so it resume where it left off.
* Add useId to react-debug-tools
* Add selective hydration test
Demonstrates that selective hydration works and ids are preserved even
after subsequent client updates.
I had to revert #22292 because there are some internal callers of
useMutableSource that we haven't migrated yet. This removes
useMutableSource from the open source build but keeps it in the
internal one.
* Move useSyncExternalStore shim to a nested entrypoint
Also renames `useSyncExternalStoreExtra` to
`useSyncExternalStoreWithSelector`.
- 'use-sync-external-store/shim' -> A shim for `useSyncExternalStore`
that works in React 16 and 17 (any release that supports hooks). The
module will first check if the built-in React API exists, before
falling back to the shim.
- 'use-sync-external-store/with-selector' -> An extended version of
`useSyncExternalStore` that also supports `selector` and `isEqual`
options. It does _not_ shim `use-sync-external-store`; it composes the
built-in React API. **Use this if you only support 18+.**
- 'use-sync-external-store/shim/with-selector' -> Same API, but it
composes `use-sync-external-store/shim` instead. **Use this for
compatibility with 16 and 17.**
- 'use-sync-external-store' -> Re-exports React's built-in API. Not
meant to be used. It will warn and direct users to either the shim or
the built-in API.
* Upgrade useSyncExternalStore to alpha channel
This is an initial, partial implementation of a cleanup mechanism for the experimental Cache API. The idea is that consumers of the Cache API can register to be informed when a given Cache instance is no longer needed so that they can perform associated cleanup tasks to free resources stored in the cache. A canonical example would be cancelling pending network requests.
An overview of the high-level changes:
* Changes the `Cache` type from a Map of cache instances to be an object with the original Map of instances, a reference count (to count roughly "active references" to the cache instances - more below), and an AbortController.
* Adds a new public API, `unstable_getCacheSignal(): AbortSignal`, which is callable during render. It returns an AbortSignal tied to the lifetime of the cache - developers can listen for the 'abort' event on the signal, which React now triggers when a given cache instance is no longer referenced.
* Note that `AbortSignal` is a web standard that is supported by other platform APIs; for example a signal can be passed to `fetch()` to trigger cancellation of an HTTP request.
* Implements the above - triggering the 'abort' event - by handling passive mount/unmount for HostRoot and CacheComponent fiber nodes.
Cases handled:
* Aborted transitions: we clean up a new cache created for an aborted transition
* Suspense: we retain a fresh cache instance until a suspended tree resolves
For follow-ups:
* When a subsequent cache refresh is issued before a previous refresh completes, the refreshes are queued. Fresh cache instances for previous refreshes in the queue should be cleared, retaining only the most recent cache. I plan to address this in a follow-up PR.
* If a refresh is cancelled, the fresh cache should be cleaned up.
@huozhi tried this out and says it's working as expected. I think we
can go ahead and move this into the stable channel, so that it is
available in the React 18 alpha releases.
* Extract `act` environment check into function
`act` checks the environment to determine whether to fire a warning.
We're changing how this check works in React 18. As a first step, this
refactors the logic into a single function. No behavior changes yet.
* Use IS_REACT_ACT_ENVIRONMENT to disable warnings
If `IS_REACT_ACT_ENVIRONMENT` is set to `false`, we will suppress
any `act` warnings. Otherwise, the behavior of `act` is the same as in
React 17: if `jest` is defined, it warns.
In concurrent mode, the plan is to remove the `jest` check and only warn
if `IS_REACT_ACT_ENVIRONMENT` is true. I have not implemented that
part yet.
* Hoist error codes import to module scope
When this code was written, the error codes map (`codes.json`) was
created on-the-fly, so we had to lazily require from inside the visitor.
Because `codes.json` is now checked into source, we can import it a
single time in module scope.
* Minify error constructors in production
We use a script to minify our error messages in production. Each message
is assigned an error code, defined in `scripts/error-codes/codes.json`.
Then our build script replaces the messages with a link to our
error decoder page, e.g. https://reactjs.org/docs/error-decoder.html/?invariant=92
This enables us to write helpful error messages without increasing the
bundle size.
Right now, the script only works for `invariant` calls. It does not work
if you throw an Error object. This is an old Facebookism that we don't
really need, other than the fact that our error minification script
relies on it.
So, I've updated the script to minify error constructors, too:
Input:
Error(`A ${adj} message that contains ${noun}`);
Output:
Error(formatProdErrorMessage(ERR_CODE, adj, noun));
It only works for constructors that are literally named Error, though we
could add support for other names, too.
As a next step, I will add a lint rule to enforce that errors written
this way must have a corresponding error code.
* Minify "no fallback UI specified" error in prod
This error message wasn't being minified because it doesn't use
invariant. The reason it didn't use invariant is because this particular
error is created without begin thrown — it doesn't need to be thrown
because it's located inside the error handling part of the runtime.
Now that the error minification script supports Error constructors, we
can minify it by assigning it a production error code in
`scripts/error-codes/codes.json`.
To support the use of Error constructors more generally, I will add a
lint rule that enforces each message has a corresponding error code.
* Lint rule to detect unminified errors
Adds a lint rule that detects when an Error constructor is used without
a corresponding production error code.
We already have this for `invariant`, but not for regular errors, i.e.
`throw new Error(msg)`. There's also nothing that enforces the use of
`invariant` besides convention.
There are some packages where we don't care to minify errors. These are
packages that run in environments where bundle size is not a concern,
like react-pg. I added an override in the ESLint config to ignore these.
* Temporarily add invariant codemod script
I'm adding this codemod to the repo temporarily, but I'll revert it
in the same PR. That way we don't have to check it in but it's still
accessible (via the PR) if we need it later.
* [Automated] Codemod invariant -> Error
This commit contains only automated changes:
npx jscodeshift -t scripts/codemod-invariant.js packages --ignore-pattern="node_modules/**/*"
yarn linc --fix
yarn prettier
I will do any manual touch ups in separate commits so they're easier
to review.
* Remove temporary codemod script
This reverts the codemod script and ESLint config I added temporarily
in order to perform the invariant codemod.
* Manual touch ups
A few manual changes I made after the codemod ran.
* Enable error code transform per package
Currently we're not consistent about which packages should have their
errors minified in production and which ones should.
This adds a field to the bundle configuration to control whether to
apply the transform. We should decide what the criteria is going
forward. I think it's probably a good idea to minify any package that
gets sent over the network. So yes to modules that run in the browser,
and no to modules that run on the server and during development only.
* Revise ESLint rules for string coercion
Currently, react uses `'' + value` to coerce mixed values to strings.
This code will throw for Temporal objects or symbols.
To make string-coercion safer and to improve user-facing error messages,
This commit adds a new ESLint rule called `safe-string-coercion`.
This rule has two modes: a production mode and a non-production mode.
* If the `isProductionUserAppCode` option is true, then `'' + value`
coercions are allowed (because they're faster, although they may
throw) and `String(value)` coercions are disallowed. Exception:
when building error messages or running DEV-only code in prod
files, `String()` should be used because it won't throw.
* If the `isProductionUserAppCode` option is false, then `'' + value`
coercions are disallowed (because they may throw, and in non-prod
code it's not worth the risk) and `String(value)` are allowed.
Production mode is used for all files which will be bundled with
developers' userland apps. Non-prod mode is used for all other React
code: tests, DEV blocks, devtools extension, etc.
In production mode, in addiiton to flagging `String(value)` calls,
the rule will also flag `'' + value` or `value + ''` coercions that may
throw. The rule is smart enough to silence itself in the following
"will never throw" cases:
* When the coercion is wrapped in a `typeof` test that restricts to safe
(non-symbol, non-object) types. Example:
if (typeof value === 'string' || typeof value === 'number') {
thisWontReport('' + value);
}
* When what's being coerced is a unary function result, because unary
functions never return an object or a symbol.
* When the coerced value is a commonly-used numeric identifier:
`i`, `idx`, or `lineNumber`.
* When the statement immeidately before the coercion is a DEV-only
call to a function from shared/CheckStringCoercion.js. This call is a
no-op in production, but in DEV it will show a console error
explaining the problem, then will throw right after a long explanatory
code comment so that debugger users will have an idea what's going on.
The check function call must be in the following format:
if (__DEV__) {
checkXxxxxStringCoercion(value);
};
Manually disabling the rule is usually not necessary because almost all
prod use of the `'' + value` pattern falls into one of the categories
above. But in the rare cases where the rule isn't smart enough to detect
safe usage (e.g. when a coercion is inside a nested ternary operator),
manually disabling the rule will be needed.
The rule should also be manually disabled in prod error handling code
where `String(value)` should be used for coercions, because it'd be
bad to throw while building an error message or stack trace!
The prod and non-prod modes have differentiated error messages to
explain how to do a proper coercion in that mode.
If a production check call is needed but is missing or incorrect
(e.g. not in a DEV block or not immediately before the coercion), then
a context-sensitive error message will be reported so that developers
can figure out what's wrong and how to fix the problem.
Because string coercions are now handled by the `safe-string-coercion`
rule, the `no-primitive-constructor` rule no longer flags `String()`
usage. It still flags `new String(value)` because that usage is almost
always a bug.
* Add DEV-only string coercion check functions
This commit adds DEV-only functions to check whether coercing
values to strings using the `'' + value` pattern will throw. If it will
throw, these functions will:
1. Display a console error with a friendly error message describing
the problem and the developer can fix it.
2. Perform the coercion, which will throw. Right before the line where
the throwing happens, there's a long code comment that will help
debugger users (or others looking at the exception call stack) figure
out what happened and how to fix the problem.
One of these check functions should be called before all string coercion
of user-provided values, except when the the coercion is guaranteed not
to throw, e.g.
* if inside a typeof check like `if (typeof value === 'string')`
* if coercing the result of a unary function like `+value` or `value++`
* if coercing a variable named in a whitelist of numeric identifiers:
`i`, `idx`, or `lineNumber`.
The new `safe-string-coercion` internal ESLint rule enforces that
these check functions are called when they are required.
Only use these check functions in production code that will be bundled
with user apps. For non-prod code (and for production error-handling
code), use `String(value)` instead which may be a little slower but will
never throw.
* Add failing tests for string coercion
Added failing tests to verify:
* That input, select, and textarea elements with value and defaultValue
set to Temporal-like objects which will throw when coerced to string
using the `'' + value` pattern.
* That text elements will throw for Temporal-like objects
* That dangerouslySetInnerHTML will *not* throw for Temporal-like
objects because this value is not cast to a string before passing to
the DOM.
* That keys that are Temporal-like objects will throw
All tests above validate the friendly error messages thrown.
* Use `String(value)` for coercion in non-prod files
This commit switches non-production code from `'' + value` (which
throws for Temporal objects and symbols) to instead use `String(value)`
which won't throw for these or other future plus-phobic types.
"Non-produciton code" includes anything not bundled into user apps:
* Tests and test utilities. Note that I didn't change legacy React
test fixtures because I assumed it was good for those files to
act just like old React, including coercion behavior.
* Build scripts
* Dev tools package - In addition to switching to `String`, I also
removed special-case code for coercing symbols which is now
unnecessary.
* Add DEV-only string coercion checks to prod files
This commit adds DEV-only function calls to to check if string coercion
using `'' + value` will throw, which it will if the value is a Temporal
object or a symbol because those types can't be added with `+`.
If it will throw, then in DEV these checks will show a console error
to help the user undertsand what went wrong and how to fix the
problem. After emitting the console error, the check functions will
retry the coercion which will throw with a call stack that's easy (or
at least easier!) to troubleshoot because the exception happens right
after a long comment explaining the issue. So whether the user is in
a debugger, looking at the browser console, or viewing the in-browser
DEV call stack, it should be easy to understand and fix the problem.
In most cases, the safe-string-coercion ESLint rule is smart enough to
detect when a coercion is safe. But in rare cases (e.g. when a coercion
is inside a ternary) this rule will have to be manually disabled.
This commit also switches error-handling code to use `String(value)`
for coercion, because it's bad to crash when you're trying to build
an error message or a call stack! Because `String()` is usually
disallowed by the `safe-string-coercion` ESLint rule in production
code, the rule must be disabled when `String()` is used.
Recoil uses useMutableSource behind a flag. I thought this was fine
because Recoil isn't used in any concurrent roots, so the behavior
would be the same, but it turns out that it is used by concurrent
roots in a few places.
I'm not expecting it to be hard to migrate to useSyncExternalStore, but
to de-risk the change I'm going to roll it out gradually with a flag. In
the meantime, I've added back the useMutableSource API.
Jan KassensandGitHub
Sebastian MarkbågeandGitHub
Andrew ClarkandGitHub
RickyandGitHub
Samuel SuslaandGitHub
Jiachi LiuandGitHub
davidrenneandGitHub
Luna RuanandGitHub
Josh StoryandGitHub
RickyandGitHub
danandGitHub
Sebastian SilbermannandGitHub
salazarmandGitHub
Jack WorksandGitHub
Rin ArakakiandGitHub
Justin GrantandGitHub
BIKI DASandGitHub