The goal is to improve speed of the development by inlining and DCE
unused branches.
We have the ability to preserve some variable names and pretty print in
the production version so might as well do the same with DEV.
When we made stylesheets suspend even during high priority updates we
exposed a bug in the loading tracking of stylesheets that are loaded as
part of the preamble. This allowed these stylesheets to put suspense
boundaries into fallback mode more often than expected because cases
where a stylesheet was server rendered could now cause a fallback to
trigger which was never intended to happen.
This fix updates resource construction to evaluate whether the instance
exists in the DOM prior to construction and if so marks the resource as
loaded and inserted.
One ambiguity that needed to be solved still is how to tell whether a
stylesheet rendered as part of a late Suspense boundary reveal is
already loaded. I updated the instruction to clear out the loading
promise after successfully loading. This is useful because later if we
encounter this same resource again we can avoid the microtask if it is
already loaded. It also means that we can concretely understand that if
a stylesheet is in the DOM without this marker then it must have loaded
(or errored) already.
This refactors key warning to happen inline after we've matched a Fiber.
I didn't want to do that originally because it was riskier. But it turns
out to be straightforward enough.
This lets us use that Fiber as the source of the warning which matters
to DevTools because then DevTools can associate it with the right
component after it mounts.
We can also associate the duplicate key warning with this Fiber. That
way we'll get the callsite with the duplicate key on the stack and can
associate this warning with the child that had the duplicate.
I kept the forked DevTools tests because the warning now is counted on
the Child instead of the Parent (18 behavior).
However, this won't be released in 19.0.0 so I only test this in
whatever the next version is.
Doesn't seem worth it to have a test for just the 19.0.0 behavior.
Stacked on #29491
Previously if you aborted during a render the currently rendering task
would itself be aborted which will cause the entire model to be replaced
by the aborted error rather than just the slot currently being rendered.
This change updates the abort logic to mark currently rendering tasks as
aborted but allowing the current render to emit a partially serialized
model with an error reference in place of the current model.
The intent is to support aborting from rendering synchronously, in
microtasks (after an await or in a .then) and in lazy initializers. We
don't specifically support aborting from things like proxies that might
be triggered during serialization of props
## Summary
The test started to fail after
https://github.com/facebook/react/pull/29088.
Fork the test and the expected store state for:
- React 18.x, to represent the previous behavior
- React >= 19, to represent the current RDT behavior, where error can't
be connected to the fiber, because it was not yet mounted and shared
with DevTools.
Ideally, DevTools should start keeping track of such fibers, but also
distinguish them from some that haven't mounted due to Suspense or error
boundaries.
Stacked on #29551
Flight pings much more often than Fizz because async function components
will always take at least a microtask to resolve . Rather than
scheduling this work as a new macrotask Flight now schedules pings in a
microtask. This allows more microtasks to ping before actually doing a
work flush but doesn't force the vm to spin up a new task which is quite
common give n the nature of Server Components
While most builds of Flight and Fizz schedule work in new tasks some do
execute work synchronously. While this is necessary for legacy APIs like
renderToString for modern APIs there really isn't a great reason to do
this synchronously.
We could schedule works as microtasks but we actually want to yield so
the runtime can run events and other things that will unblock additional
work before starting the next work loop.
This change updates all non-legacy uses to be async using the best
availalble macrotask scheduler.
Browser now uses postMessage
Bun uses setTimeout because while it also supports setImmediate the
scheduling is not as eager as the same API in node
the FB build also uses setTimeout
This change required a number of changes to tests which were utilizing
the sync nature of work in the Browser builds to avoid having to manage
timers and tasks. I added a patch to install MessageChannel which is
required by the browser builds and made this patched version integrate
with the Scheduler mock. This way we can effectively use `act` to flush
flight and fizz work similar to how we do this on the client.
## Summary
There was an attempt to upgrade `ip` to 2.0.1 to mitigate CVE in
https://github.com/facebook/react/pull/29725#issuecomment-2150389616,
but there actually another one CVE in version `2.0.1`. Instead, migrate
to `internal-ip`, which similarly small package that we can use
Note: not upgrading to version 7+, because they are pure ESM.
## How did you test this change?
Validated that standalone version of RDT works and connects to the app.
## Summary
We currently do deep diffing for object props, and also use custom
differs, if they are defined, for props with custom attribute config.
The idea is to simply do a `===` comparison instead of all that work. We
will do less computation on the JS side, but send more data to native.
The hypothesis is that this change should be neutral in terms of
performance. If that's the case, we'll be able to get rid of custom
differs, and be one step closer to deleting view configs.
This PR adds the `enableShallowPropDiffing` feature flag to support this
experiment.
## How did you test this change?
With `enableShallowPropDiffing` hardcoded to `true`:
```
yarn test packages/react-native-renderer
```
This fails on the following test cases:
- should use the diff attribute
- should do deep diffs of Objects by default
- should skip deeply-nested changed functions
Which makes sense with this change. These test cases should be deleted
if the experiment is shipped.
This lets us ensure that we use the original V8 format and it lets us
skip source mapping. Source mapping every call can be expensive since we
do it eagerly for server components even if an error doesn't happen.
In the case of an error being thrown we don't actually always do this in
practice because if a try/catch before us touches it or if something in
onError touches it (which the default console.error does), it has
already been initialized. So we have to be resilient to thrown errors
having other formats.
These are not as perf sensitive since something actually threw but if
you want better perf in these cases, you can simply do something like
`onError(error) { console.error(error.message) }` instead.
The server has to be aware whether it's looking up original or compiled
output. I currently use the file:// check to determine if it's referring
to a source mapped file or compiled file in the fixture. A bundled app
can more easily check if it's a bundle or not.
Normally we take the renderClientElement path but this is an internal
fast path.
No tests because we don't run tests with console.createTask (which is
not easy since we test component stacks).
Ideally this would be covered by types but since the types don't
consider flags and DEV it doesn't really help.
## Overview
We didn't have any tests that ran in persistent mode with the xplat
feature flags (for either variant).
As a result, invalid test gating like in
https://github.com/facebook/react/pull/29664 were not caught.
This PR adds test flavors for `ReactFeatureFlag-native-fb.js` in both
variants.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
Remove `startTransition` and `useActionState` from `react-server`
condition of react, as they should only stay in client bundle.
This will reduce the server bundle of react itself.
Found this while tracing where the `process.emit` was called.
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
This information is available in the regular stack but since that's
hidden behind an expando and our appended stack to logs is not hidden,
it hides the most important frames like the name of the current
component.
This is closer to what happens to the native stack.
We only include stacks if they're within a ReactFiberCallUserSpace call
frame. This should be most that have a current fiber but this is
critical to filtering out most React frames if the regular node_modules
filter doesn't work.
Most React warnings fire during the rendering phase and not inside a
user space function but some do like hooks warnings and setState in
render. This feature is more important if we port this to React DevTools
appending stacks to all logs where it's likely to originate from inside
a component and you want the line within that component to immediately
part of the visible stack.
One thing that kind sucks is that we don't have a reliable way to
exclude React internal stack frames. We filter node_modules but it might
not match. For other cases I try hard to only track the stack frame at
the root of React (e.g. immediately inside createElement) until the
ReactFiberCallUserSpace so we don't need the filtering to work. In this
case it's hard to achieve the same thing though. This is easier in RDT
because we have the start/end line and parsing of stack traces so we can
use that to exclude internals but that's a lot of code/complexity for
shipping within the library.
For example in Safari:
<img width="590" alt="Screenshot 2024-05-31 at 6 15 27 PM"
src="https://github.com/facebook/react/assets/63648/2820c8c0-8a03-42e9-8678-8348f66b051a">
Ideally warnOnUseFormStateInDev and useFormState wouldn't be included
since they're React internals. Before this change, the Counter.js line
also wasn't included though which points to exactly where the error is
within the user code.
(Note Server Components have V8 formatted lines and Client Components
have JSC formatted lines.)
Based on
- #29694
---
If an action in the useActionState queue errors, we shouldn't run any
subsequent actions. The contract of useActionState is that the actions
run in sequence, and that one action can assume that all previous
actions have completed successfully.
For example, in a shopping cart UI, you might dispatch an "Add to cart"
action followed by a "Checkout" action. If the "Add to cart" action
errors, the "Checkout" action should not run.
An implication of this change is that once useActionState falls into an
error state, the only way to recover is to reset the component tree,
i.e. by unmounting and remounting. The way to customize the error
handling behavior is to wrap the action body in a try/catch.
Mini-refactor of useActionState to only wrap the action in a transition
context if the dispatch is called during a transition. Conceptually, the
action starts as soon as the dispatch is called, even if the action is
queued until earlier ones finish.
We will also warn if an async action is dispatched outside of a
transition, since that is almost certainly a mistake. Ideally we would
automatically upgrade these to a transition, but we don't have a great
way to tell if the action is async until after it's already run.
Host Components can exist as four semantic types
1. regular Components (Vanilla obv)
2. singleton Components
2. hoistable components
3. resources
Each of these component types have their own rules related to mounting
and reconciliation however they are not direclty modeled as their own
unique fiber type. This is partly for code size but also because
reconciling the inner type of these components would be in a very hot
path in fiber creation and reconciliation and it's just not practical to
do this logic check here.
Right now we have three Fiber types used to implement these 4 concepts
but we probably need to reconsider the model and think of Host
Components as a single fiber type with an inner implementation. Once we
do this we can regularize things like transitioning between a resource
and a regular component or a singleton and a hoistable instance. The
cases where these transitions happen today aren't particularly common
but they can be observed and currently the handling of these transitions
is incomplete at best and buggy at worst. The most egregious case is the
link type. This can be a regular component (stylesheet without
precedence) a hoistable component (non stylesheet link tags) or a
resource (stylesheet with a precedence) and if you have a single jsx
slot that tries to reconcile transitions between these types it just
doesn't work well.
This commit adds an error for when a Hoistable goes from Instance to
Resource. Currently this is only possible for `<link>` elements going to
and from stylesheets with precedence. Hopefully we'll be able to remove
this error and implement as an inner type before we encounter new
categories for the Hoistable types
detecting type shifting to and from regular components is harder to do
efficiently because we don't want to reevaluate the type on every update
for host components which is currently not required and would add
overhead to a very hot path
singletons can't really type shift in their one practical implementation
(DOM) so they are only a problem in theroy not practice
This lets you click a stack frame on the client and see the Server
source code inline.
<img width="871" alt="Screenshot 2024-06-01 at 11 44 24 PM"
src="https://github.com/facebook/react/assets/63648/581281ce-0dce-40c0-a084-4a6d53ba1682">
<img width="840" alt="Screenshot 2024-06-01 at 11 43 37 PM"
src="https://github.com/facebook/react/assets/63648/00dc77af-07c1-4389-9ae0-cf1f45199efb">
We could do some logic on the server that sends a source map url for
every stack frame in the RSC payload. That would make the client
potentially config free. However regardless we need the config to
describe what url scheme to use since that’s not built in to the bundler
config. In practice you likely have a common pattern for your source
maps so no need to send data over and over when we can just have a
simple function configured on the client.
The server must return a source map, even if the file is not actually
compiled since the fake file is still compiled.
The source mapping strategy can be one of two models depending on if the
server’s stack traces (`new Error().stack`) are source mapped back to
the original (`—enable-source-maps`) or represents the location in
compiled code (like in the browser).
If it represents the location in compiled code it’s actually easier. You
just serve the source map generated for that file by the tooling.
If it is already source mapped it has to generate a source map where
everything points to the same location (as if not compiled) ideally with
a segment per logical ast node.
When a component suspends with `use`, we switch to the "re-render"
dispatcher during the subsequent render attempt, so that we can reuse
the work from the initial attempt. However, once we run out of hooks
from the previous attempt, we should switch back to the regular "update"
dispatcher.
This is conceptually the same fix as the one introduced in
https://github.com/facebook/react/pull/26232. That fix only accounted
for initial mount, but the useTransition regression test added in
f82973302b3f490ec120c3b102e8c3792452dfc9 illustrates that we need to
handle updates, too.
The issue affects more than just useTransition but because most of the
behavior between the "re-render" and "update" dispatchers is the same
it's hard to contrive other scenarios in a test, which is probably why
it took so long for someone to notice.
Closes#28923 and #29209
---------
Co-authored-by: eps1lon <sebastian.silbermann@vercel.com>
This lets any element created from the server, to bottom out with a
client "owner" which is the creator of the Flight request. This could be
a Server Action being invoked or a router.
This is similar to how a client element bottoms out in the creator of
the root element without an owner. E.g. where the root app element was
created.
Without this, we inherit the task of whatever is currently executing
when we're parsing which can be misleading.
Before:
<img width="507" alt="Screenshot 2024-05-30 at 12 06 57 PM"
src="https://github.com/facebook/react/assets/63648/e234db7e-67f7-404c-958a-5c5500ffdf1f">
After:
<img width="555" alt="Screenshot 2024-05-30 at 4 59 04 PM"
src="https://github.com/facebook/react/assets/63648/8ba6acb4-2ffd-49d4-bd44-08228ad4200e">
The before/after doesn't show much of a difference here but that's just
because our Flight parsing loop is an async, which maybe it shouldn't be
because it can be unnecessarily deep, and it creates a hidden line for
every loop. That's what the `Promise.then` is. If the element is lazily
initialized it's worse because we can end up in an unrelated render task
as the owner - although that's its own problem.
When defining a displayName on forwardRef/memo we forward that name to
the inner function.
We used to use displayName for this but in #29206 I switched this to use
`"name"`. That's because V8 doesn't use displayName, it only uses the
overridden name in stack traces. This is the only thing covered by our
tests for component stacks.
However, I realized that Safari only uses displayName and not the name.
So this sets both.
## Summary
In https://github.com/facebook/react/pull/29088, the validation logic
for `React.Children` inspected whether `mappedChild` — the return value
of the map callback — has a valid `key`. However, this deviates from
existing behavior which only warns if the original `child` is missing a
required `key`.
This fixes false positive `key` validation warnings when using
`React.Children`, by validating the original `child` instead of
`mappedChild`.
This is a more general fix that expands upon my previous fix in
https://github.com/facebook/react/pull/29662.
## How did you test this change?
```
$ yarn test ReactChildren-test.js
```
Follow up to https://github.com/facebook/react/pull/29632.
It's possible for `eval` to throw such as if we're in a CSP environment.
This is non-essential debug information. We can still proceed to create
a fake stack entry. It'll still have the right name. It just won't have
the right line/col number nor source url/source map. It might also be
ignored listed since it's inside Flight.
We have three kinds of stacks that we send in the RSC protocol:
- The stack trace where a replayed `console.log` was called on the
server.
- The JSX callsite that created a Server Component which then later
called another component.
- The JSX callsite that created a Host or Client Component.
These stack frames disappear in native stacks on the client since
they're executed on the server. This evals a fake file which only has
one call in it on the same line/column as the server. Then we call
through these fake modules to "replay" the callstack. We then replay the
`console.log` within this stack, or call `console.createTask` in this
stack to recreate the stack.
The main concern with this approach is the performance. It adds
significant cost to create all these eval:ed functions but it should
eventually balance out.
This doesn't yet apply source maps to these. With source maps it'll be
able to show the server source code when clicking the links.
I don't love how these appear.
- Because we haven't yet initialized the client module we don't have the
name of the client component we're about to render yet which leads to
the `<...>` task name.
- The `(async)` suffix Chrome adds is still a problem.
- The VMxxxx prefix is used to disambiguate which is noisy. Might be
helped by source maps.
- The continuation of the async stacks end up rooted somewhere in the
bootstrapping of the app. This might be ok when the bootstrapping ends
up ignore listed but it's kind of a problem that you can't clear the
async stack.
<img width="927" alt="Screenshot 2024-05-28 at 11 58 56 PM"
src="https://github.com/facebook/react/assets/63648/1c9d32ce-e671-47c8-9d18-9fab3bffabd0">
<img width="431" alt="Screenshot 2024-05-28 at 11 58 07 PM"
src="https://github.com/facebook/react/assets/63648/52f57518-bbed-400e-952d-6650835ac6b6">
<img width="327" alt="Screenshot 2024-05-28 at 11 58 31 PM"
src="https://github.com/facebook/react/assets/63648/d311a639-79a1-457f-9a46-4f3298d07e65">
<img width="817" alt="Screenshot 2024-05-28 at 11 59 12 PM"
src="https://github.com/facebook/react/assets/63648/3aefd356-acf4-4daa-bdbf-b8c8345f6d4b">
Partially reverts https://github.com/facebook/react/pull/28593.
While rolling out RDT 5.2.0, I've observed some issues on React Native
side: hooks inspection for some complex hook trees, like in
AnimatedView, were broken. After some debugging, I've noticed a
difference between what is in frame's source.
The difference is in the top-most frame, where with V8 it will correctly
pick up the `Type` as `Proxy` in `hookStack`, but for Hermes it will be
`Object`. This means that for React Native this top most frame is
skipped, since sources are identical.
Here I am reverting back to the previous logic, where we check each
frame if its a part of the wrapper, but also updated `isReactWrapper`
function to have an explicit case for `useFormStatus` support.
## Summary
https://github.com/facebook/react/pull/29088 introduced a regression
triggering this warning when rendering flattened positional children:
> Each child in a list should have a unique "key" prop.
The specific scenario that triggers this is when rendering multiple
positional children (which do not require unique `key` props) after
flattening them with one of the `React.Children` utilities (e.g.
`React.Children.toArray`).
The refactored logic in `React.Children` incorrectly drops the
`element._store.validated` property in `__DEV__`. This diff fixes the
bug and introduces a unit test to prevent future regressions.
## How did you test this change?
```
$ yarn test ReactChildren-test.js
```
## Summary
This PR add tests for `ReactNativeAttributePayloadFabric.js`.
It introduces `ReactNativeAttributePayloadFabric-test.internal.js`,
which is a copy-paste of `ReactNativeAttributePayload-test.internal.js`.
On top of that, there is a bunch of new test cases for the
`ReactNativeAttributePayloadFabric.create` function.
## How did you test this change?
```
yarn test packages/react-native-renderer
```
This was missed in https://github.com/facebook/react/pull/29038 when
unifying the "owner" abstractions, causing `findNodeHandle` to warn even
outside of `render()` invocations.
This didn't actually fail before but I'm just adding an extra check.
Currently Client References are always "function" proxies so they never
fall into this branch. However, we do in theory support objects as
client references too depending on environment. We have checks
elsewhere. So this just makes that consistent.
Fixes the behavior of actions that are queued by useActionState to use
the action function that was current at the time it was dispatched, not
at the time it eventually executes.
The conceptual model is that the action is immediately dispatched, as if
it were sent to a remote server/worker. It's the remote worker that
maintains the queue, not the client.
This is another property of actions makes them more like event handlers
than like reducers.
`disableDOMTestUtils` and the FB build `ReactTestUtilsFB` allowed us to
finish migrating internal callsites off of ReactTestUtils. Now that
usage is cleaned up, we can remove the flag, build artifact, and test
coverage for the deprecated utility methods.
Throw an error during module initialization if the version of the
"react-dom" package does not match the version of "react".
We used to be more relaxed about this, because the "react" package
changed so infrequently. However, we now have many more features that
rely on an internal protocol between the two packages, including Hooks,
Float, and the compiler runtime. So it's important that both packages
are versioned in lockstep.
Before this change, a version mismatch would often result in a cryptic
internal error with no indication of the root cause.
Instead, we will now compare the versions during module initialization
and immediately throw an error to catch mistakes as early as possible
and provide a clear error message.
Stacked on #29206 and #29221.
This disables appending owner stacks to console when
`console.createTask` is available in the environment. Instead we rely on
native "async" stacks that end up looking like this with source maps and
ignore list enabled.
<img width="673" alt="Screenshot 2024-05-22 at 4 00 27 PM"
src="https://github.com/facebook/react/assets/63648/5313ed53-b298-4386-8f76-8eb85bdfbbc7">
Unfortunately Chrome requires a string name for each async stack and,
worse, a suffix of `(async)` is automatically added which is very
confusing since it seems like it might be an async component or
something which it is not.
In this case it's not so bad because it's nice to refer to the host
component which otherwise doesn't have a stack frame since it's
internal. However, if there were more owners here there would also be a
`<Counter> (async)` which ends up being kind of duplicative.
If the Chrome DevTools is not open from the start of the app, then
`console.createTask` is disabled and so you lose the stack for those
errors (or those parents if the devtools is opened later). Unlike our
appended ones that are always added. That's unfortunate and likely to be
a bit of a DX issue but it's also nice that it saves on perf in DEV mode
for those cases. Framework dialogs can still surface the stack since we
also track it in user space in parallel.
This currently doesn't track Server Components yet. We need a more
clever hack for that part in a follow up.
I think I probably need to also add something to React DevTools to
disable its stacks for this case too. Since it looks for stacks in the
console.error and adds a stack otherwise. Since we don't add them
anymore from the runtime, the DevTools adds them instead.
Stacked on #29044.
To work with `console.createTask(...).run(...)` we need to be able to
run a function in the scope of the task.
The main concern with this, other than general performance, is that it
might add more stack frames on very deep stacks that hit the stack
limit. Such as with the commit phase where we recursively go down the
tree. These callbacks aren't really necessary in the recursive part but
only in the shallow invocation of the commit phase for each tag. So we
could refactor the commit phase so that only the shallow part at each
level is covered this way.
This one should be fully behind the `enableOwnerStacks` flag.
Instead of printing the parent Component stack all the way to the root,
this now prints the owner stack of every JSX callsite. It also includes
intermediate callsites between the Component and the JSX call so it has
potentially more frames. Mainly it provides the line number of the JSX
callsite. In terms of the number of components is a subset of the parent
component stack so it's less information in that regard. This is usually
better since it's more focused on components that might affect the
output but if it's contextual based on rendering it's still good to have
parent stack. Therefore, I still use the parent stack when printing DOM
nesting warnings but I plan on switching that format to a diff view
format instead (Next.js already reformats the parent stack like this).
__Follow ups__
- Server Components show up in the owner stack for client logs but logs
done by Server Components don't yet get their owner stack printed as
they're replayed. They're also not yet printed in the server logs of the
RSC server.
- Server Component stack frames are formatted as the server and added to
the end but this might be a different format than the browser. E.g. if
server is running V8 and browser is running JSC or vice versa. Ideally
we can reformat them in terms of the client formatting.
- This doesn't yet update Fizz or DevTools. Those will be follow ups.
Fizz still prints parent stacks in the server side logs. The stacks
added to user space `console.error` calls by DevTools still get the
parent stacks instead.
- It also doesn't yet expose these to user space so there's no way to
get them inside `onCaughtError` for example or inside a custom
`console.error` override.
- In another follow up I'll use `console.createTask` instead and
completely remove these stacks if it's available.
Note: Despite the similar-sounding description, this fix is unrelated to
the issue where updates that occur after an `await` in an async action
must also be wrapped in their own `startTransition`, due to the absence
of an AsyncContext mechanism in browsers today.
---
Discovered a flaw in the current implementation of the isomorphic
startTransition implementation (React.startTransition), related to async
actions. It only creates an async scope if something calls setState
within the synchronous part of the action (i.e. before the first
`await`). I had thought this was fine because if there's no update
during this part, then there's nothing that needs to be entangled. I
didn't think this through, though — if there are multiple async updates
interleaved throughout the rest of the action, we need the async scope
to have already been created so that _those_ are batched together.
An even easier way to observe this is to schedule an optimistic update
after an `await` — the optimistic update should not be reverted until
the async action is complete.
To implement, during the reconciler's module initialization, we compose
its startTransition implementation with any previous reconciler's
startTransition that was already initialized. Then, the isomorphic
startTransition is the composition of every
reconciler's startTransition.
```js
function startTransition(fn) {
return startTransitionDOM(() => {
return startTransitionART(() => {
return startTransitionThreeFiber(() => {
// and so on...
return fn();
});
});
});
}
```
This is basically how flushSync is implemented, too.
Previously Suspensey recursion would only trigger if the
ShouldSuspendCommit flag was true. However there is a dependence on the
Visibility flag embedded in this logic because these flags share a bit.
To make it clear that the semantics of Suspensey resources require
considering both flags I've added it to the condition even though this
extra or-ing is a noop when the bit is shared
This is necessary to simplify the component stack handling to make way
for owner stacks. It also solves some hacks that we used to have but
don't quite make sense. It also solves the problem where things like key
warnings get silenced in RSC because they get deduped. It also surfaces
areas where we were missing key warnings to begin with.
Almost every type of warning is issued from the renderer. React Elements
are really not anything special themselves. They're just lazily invoked
functions and its really the renderer that determines there semantics.
We have three types of warnings that previously fired in
JSX/createElement:
- Fragment props validation.
- Type validation.
- Key warning.
It's nice to be able to do some validation in the JSX/createElement
because it has a more specific stack frame at the callsite. However,
that's the case for every type of component and validation. That's the
whole point of enableOwnerStacks. It's also not sufficient to do it in
JSX/createElement so we also have validation in the renderers too. So
this validation is really just an eager validation but also happens
again later.
The problem with these is that we don't really know what types are valid
until we get to the renderer. Additionally, by placing it in the
isomorphic code it becomes harder to do deduping of warnings in a way
that makes sense for that renderer. It also means we can't reuse logic
for managing stacks etc.
Fragment props validation really should just be part of the renderer
like any other component type. This also matters once we add Fragment
refs and other fragment features. So I moved this into Fiber. However,
since some Fragments don't have Fibers, I do the validation in
ChildFiber instead of beginWork where it would normally happen.
For `type` validation we already do validation when rendering. By
leaving it to the renderer we don't have to hard code an extra list.
This list also varies by context. E.g. class components aren't allowed
in RSC but client references are but we don't have an isomorphic way to
identify client references because they're defined by the host config so
the current logic is flawed anyway. I kept the early validation for now
without the `enableOwnerStacks` since it does provide a nicer stack
frame but with that flag on it'll be handled with nice stacks anyway. I
normalized some of the errors to ensure tests pass.
For `key` validation it's the same principle. The mechanism for the
heuristic is still the same - if it passes statically through a parent
JSX/createElement call then it's considered validated. We already did
print the error later from the renderer so this also disables the early
log in the `enableOwnerStacks` flag.
I also added logging to Fizz so that key warnings can print in SSR logs.
Flight is a bit more complex. For elements that end up on the client we
just pass the `validated` flag along to the client and let the client
renderer print the error once rendered. For server components we log the
error from Flight with the server component as the owner on the stack
which will allow us to print the right stack for context. The factoring
of this is a little tricky because we only want to warn if it's in an
array parent but we want to log the error later to get the right debug
info.
Fiber/Fizz has a similar factoring problem that causes us to create a
fake Fiber for the owner which means the logs won't be associated with
the right place in DevTools.
Vitali Zaidman
Sebastian Markbåge
Josh Story
Jan Kassens
Ruslan Lesiutin
Dmytro Rykun
Batuhan Tomo
Ricky
Jiachi Liu
Andrew Clark
Timothy Yung
Sophie Alpert
Hendrik Liebau
Jack Pope