Summary:
Missed while reviewing https://github.com/facebook/react-native/pull/34974 that flex gap props in Flow typings were added to ShadowStyle instead of LayoutStyle (directly above). The same issue is not present in the TS typings.
Changelog:
[General][Fixed] - Move flex gap props to the correct type
Reviewed By: yungsters
Differential Revision: D41736652
fbshipit-source-id: de0db1676464fbd962b2c7e7e9ef62b795332f1b
Summary:
Pull Request resolved: https://github.com/facebook/react-native/pull/35342
This is a native implementation of the JS shimmed layout-specific properties in https://github.com/facebook/react-native/pull/35316.
There is an experiment splitting the prop splitting codepath in Fabric, so this change effectively has two implementations depending on whether `enablePropIteratorSetter` is enabled.
None of these changes make sense to propagate Yoga. `inlineEnd`, etc are already mapped to `YGEdgeStart` and `YGEdgeEnd`, but RN's mapping used a different name. Then `blockStart`, `blockEnd`, map directly to existing edges in all cases since we don't support a writing mode.
On web, the last value in the style which computes the given dimension is given precedence. E.g. if "left" comes after "start" it will be chosen. Yoga stylesheets are unordered, and precedence for edges is given based on specificity (left > start > horizontal > all).
We give precedence to new renamings (e.g. start to inlineStart), but to preserve consistent behavior, we give precedence to specific edges before overwriting them with flow relative ones (e.g. marginTop has precedence over marginBlockStar).
Changelog:
[General][Added] - Add Fabric implementation of flow-relative padding and margin
Reviewed By: javache
Differential Revision: D41267765
fbshipit-source-id: 896e2ed71fe8bf83aef00b0a9d70fd20b2ce47a7
Summary:
This PR adds React native binding for https://github.com/facebook/yoga/pull/1116
## Changelog
[General] [Added] - Flex gap yoga bindings
<!-- Help reviewers and the release process by writing your own changelog entry. For an example, see:
https://reactnative.dev/contributing/changelogs-in-pull-requests
-->
Pull Request resolved: https://github.com/facebook/react-native/pull/34974
Test Plan:
Run rn tester app and go to view example. You'll find a flex gap example. Example location - `packages/rn-tester/js/examples/View/ViewExample.js`
### Tested on
- [x] iOS Fabric
- [x] iOS non-fabric
- [x] Android Fabric
- [x] Android non-fabric
To test on non-fabric Android, I just switched these booleans. Let me know if there's anything else I might have missed.
<img width="674" alt="Screenshot 2022-10-14 at 3 30 48 AM" src="https://user-images.githubusercontent.com/23293248/195718971-7aee4e7e-dbf0-4452-9d47-7925919c61dc.png">
Reviewed By: mdvacca
Differential Revision: D40527474
Pulled By: NickGerleman
fbshipit-source-id: 81c2c97c76f58fad3bb40fb378aaf8b6ebd30d63
Summary:
This adds support for the `verticalAlign` style attribute, mapping the already existing `textAlignVertical` attribute as requested on https://github.com/facebook/react-native/issues/34425. This PR also updates the TextExample.android on the RNTester in order to facilitate the manual QA of this.
## Changelog
[Android] [Added] - Add support for verticalAlign style
Pull Request resolved: https://github.com/facebook/react-native/pull/34567
Test Plan:
1. On Android open the RNTester app and navigate to the Text page
2. Check the text alignment through the `Text alignment` section
https://user-images.githubusercontent.com/11707729/188051914-bf15f7eb-e53f-4de5-8033-d1b572352935.mov
Reviewed By: jacdebug
Differential Revision: D39771237
Pulled By: cipolleschi
fbshipit-source-id: d2a81bec1edd8d49a0fcd36a42fea53734909739
Summary:
React Native's TS definitions are currently mostly stored in one monolithic file. This change splits the definitions up to correspond to the source files they came from, and are placed next to the source files. I think this should help inform, and make it easy to update the TS declarations when touching the Flow file.
I noticed as part of the change that the typings have not yet removed many APIs that were removed from RN. This is bad, since it means using the removed/non-functional API doesn't cause typechecker errors. Locating typings next to source should prevent that from being able to happen.
The organization here means individual TS declarations can declare what will be in the RN entrypoint, which is a little confusing. Seems like a good potential next refactor, beyond the literal translation I did.
Changelog:
[General][Changed] - Place TS Declarations Alongside Source Files
Reviewed By: lunaleaps, rshest
Differential Revision: D39796598
fbshipit-source-id: b36366466fd1976bdd2d4c8f7a4104a33c457a07
Summary:
This updates the `transform` property to support string values as requested on https://github.com/facebook/react-native/issues/34425. This also updates the existing unit tests of the `processTransform` function ensuring the style processing works as expected and updates the TransformExample on RNTester in order to facilitate the manual QA of this.
## Changelog
[General] [Added] - Add string support to the transform property
Pull Request resolved: https://github.com/facebook/react-native/pull/34660
Test Plan:
1. Open the RNTester app and navigate to the Transforms page
2. Check the transform style through the `Transform using a string` section
https://user-images.githubusercontent.com/11707729/189550548-ee3c14dd-11c6-4fd1-bd74-f6b52ecb9eae.mov
Reviewed By: lunaleaps
Differential Revision: D39423409
Pulled By: cipolleschi
fbshipit-source-id: 0d7b79178eb33f34ae55a070ce094360b544361f
Summary:
Keeping the lowercase values but keeping the conversion values the same.
D39478951 (https://github.com/facebook/react-native/commit/ea1ec29ba67c837c82c74357e313bd4505b81eb8) reverted some changes that moved it back to uppercase but needed to add new values to `____FontWeight_Internal`. This diff removes the need for the uppercase values
Changelog: [Internal]
Differential Revision: D39506944
fbshipit-source-id: 079f73c1adcf2db28b961523b05562e21fcf3630
Summary:
This task has been created T131775291 that blames D39268920 (https://github.com/facebook/react-native/commit/f1c1f8116ba1cfa9d10c5b8c30b98b796047b9c2). I reverted part of the changes and added the support of capital letters for the font weight. It should make the test pass.
However, I am a bit puzzled: I tried to change the title of the `GemstoneTitleBar` and the test was not showing the changed value. I think I'm missing something.
Changelog: [Internal]
Reviewed By: GijsWeterings
Differential Revision: D39478951
fbshipit-source-id: d3e28336fe52c5c58b49872c3f5b6e63e1e37ca5
Summary:
This updates `fontVariant` to support space-separated string values, i.e., `'small-caps common-ligatures'`, thus aligning it with the [CSS Fonts Module Level 4](https://drafts.csswg.org/css-fonts/#font-variant-prop) specification as requested on https://github.com/facebook/react-native/issues/34425. This also adds unit tests to the `processFontVariant` function ensuring the style processing works as expected.
## Changelog
[General] [Added] - Add space-separated string support for fontVariant
Pull Request resolved: https://github.com/facebook/react-native/pull/34641
Test Plan:
This can be tested either through `processFontVariant-tests` or by using the following code:
```js
<Text
style={{
fontVariant: 'small-caps common-ligatures',
}} />
```
Reviewed By: javache
Differential Revision: D39423317
Pulled By: cipolleschi
fbshipit-source-id: ad971addb423ed338e178528a11fe9d456c03e6e
Summary:
This PR adds support for number values for `fontWeight` as requested in https://github.com/facebook/react-native/issues/34425.
## Changelog
<!-- Help reviewers and the release process by writing your own changelog entry. For an example, see:
https://reactnative.dev/contributing/changelogs-in-pull-requests
-->
[General] [Added] - Added support for number values in fontWeight.
Pull Request resolved: https://github.com/facebook/react-native/pull/34598
Test Plan:
```js
<Text style={{ fontWeight: 900, color: 'red' }}>
Hello World
</Text>
```
Reviewed By: jacdebug
Differential Revision: D39268920
Pulled By: cipolleschi
fbshipit-source-id: 9bb711677bf173f9904b74f382659042856efd83
Summary:
This PR aims to add support for objectFit a partial equivalent to the resizeMode style and prop of Image.
## Changelog
[General] [Added] - Add support for objectFit style of Image.
Pull Request resolved: https://github.com/facebook/react-native/pull/34576
Test Plan:
1. Open the RNTester app and navigate to the Image page
2. See the Object Fit section.
Reviewed By: rickhanlonii
Differential Revision: D39261176
Pulled By: jacdebug
fbshipit-source-id: 1eefd76b6c11ed5fc52b2c524ad78c91051077f6
Summary:
This adds support for the `userSelect` style attribute, mapping the already existing selectable attribute as requested on https://github.com/facebook/react-native/issues/34425. This PR also updates the TextExample.android and TestExample.ios on the RNTester in order to facilitate the manual QA of this.
## Changelog
[General] [Added] - Add support for `userSelect` style
Pull Request resolved: https://github.com/facebook/react-native/pull/34575
Test Plan:
- open the RNTester app and navigate to the Text page
- Check the `Selectable Text` through the Selectable text section
<Image src="https://user-images.githubusercontent.com/22423684/188112863-65acd145-76b0-47ba-8bc6-f72298077096.png" height="600" width="300" />
Reviewed By: yungsters
Differential Revision: D39252798
Pulled By: jacdebug
fbshipit-source-id: f7fabf20ee68778d75461f511c56f94d0d756d9c
Summary:
This adds `pointerEvents` style which is equivalent to `pointerEvents` prop as requested in https://github.com/facebook/react-native/issues/34425
## Changelog
<!-- Help reviewers and the release process by writing your own changelog entry. For an example, see:
https://reactnative.dev/contributing/changelogs-in-pull-requests
-->
[General] [Added] - Added pointerEvents style equivalent to pointerEvents prop
Pull Request resolved: https://github.com/facebook/react-native/pull/34586
Test Plan:
```
<View
style={{
pointerEvents: 'none'
}}
>
</View>
```
Reviewed By: cipolleschi
Differential Revision: D39252830
Pulled By: jacdebug
fbshipit-source-id: 94f265a6b6940a4371e7985d5de3b8143693e069
Summary:
from the original design of `StyleSheet.setStyleAttributePreprocessor()` in https://github.com/facebook/react-native/issues/11138, the overwriting warning shows when the existing preprocess is be overwritten. the behavior changes from https://github.com/facebook/react-native/commit/33b385825c72. This PR revises the logic back to original design.
## Changelog
[Internal] [Fixed] - Show warning only when overwriting existing preprocessor in `StyleSheet.setStyleAttributePreprocessor()`
Pull Request resolved: https://github.com/facebook/react-native/pull/34479
Test Plan:
Unit Test
```
PASS Libraries/StyleSheet/__tests__/StyleSheet-test.js
setStyleAttributePreprocessor
✓ should not show warning when set preprocessor first time (2 ms)
✓ should show warning when overwrite the preprocessor (1 ms)
```
Reviewed By: dmitryrykun
Differential Revision: D38940676
Pulled By: cipolleschi
fbshipit-source-id: 80cf30fff62f4a02c17f7f42b3260a6011d5fc82
Summary:
Currently both iOS and Android send over the list of transforms as an array. But there is an if statement that causes other platforms to get a matrix. This prevents other platforms from being able to use the fabric ViewProps class and the conversion functions as they exist in core, as those expect the transforms to be an array.
Stop special casing iOS and android. - Which will allow for example Windows to be able to share more fabric code.
## Changelog
[Internal] [Changed] - All platforms should get transform sent to native as an array of transform operations instead of a matrix
Pull Request resolved: https://github.com/facebook/react-native/pull/33579
Test Plan:
Similar change made in react-native-windows.
https://github.com/microsoft/react-native-windows/issues/9797
Reviewed By: NickGerleman
Differential Revision: D38615676
Pulled By: cortinico
fbshipit-source-id: 8861afe6bf34bebb09dd82f7365faf007dd79cbf
Summary:
Sometime over the past few months (and with changes such as migrating to the `hermes-eslint` parser), a bunch of lint warnings crept into the codebase.
This does a pass to clean them all up, ignore generated files, and refactor some code to be... better.
There should be no observable behavior changes as a result of this.
Changelog:
[Internal]
Reviewed By: NickGerleman
Differential Revision: D38646643
fbshipit-source-id: a7b55d1e4cd5700340cc5c21f928baf3ea1d5a58
Summary:
This diff upgrades xplat to 0.178.1 and pre-suppresses errors from turning on constrained writes.
To generate this diff I:
* Modified every `env_mode=constrain_writes` to `env_mode=ssa` and made a commit (this is so our upgrade script will work)
* Ran scripts/flow/upgrade.sh 0.178.1 to upgrade all the flowconfigs to 178.1 and suppress new-env errors
* Modified arvr/js/flowconfig.ejs to use 0.178.1 and ran `scripts/gen-flowconfig/gen-flowconfig --project arvr`
* Modified xplat/js/flowconfig.ejs to use 0.178.1 and ran `scripts/gen-flowconfig/gen-flowconfig --project xplat`
* Unstacked from the commit in point 1
Reviewed By: SamChou19815
Differential Revision: D36676019
fbshipit-source-id: c3032f18ed838afc327f00de563e7f20713bdc26
Summary:
We are working on making the empty object literal `{}` have the type `{}` - i.e. exact empty object - rather than being unsealed.
Making this change exposes a variety of errors. We can prevent these errors by annotating what we want the type of the empty object to be.
Reduces Xplat error diff to 2.3k
- Announcement: [post](https://fb.workplace.com/groups/flowlang/posts/903386663600331)
- Support group: [Flow Support](https://fb.workplace.com/groups/flow)
drop-conflicts
Format:
```
arc f
```
Sort imports
```
hg l -n | xargs js1 lint --fix --rule 'fb-tools/sort-requires'
```
Changelog: [Internal]
Reviewed By: samwgoldman
Differential Revision: D36086696
fbshipit-source-id: 90447279f2e6e38f44189b74ec0297719f7adf58
Summary:
Adds `number` to the `ColorValue` union type.
Per our docs, React Native supports specifying colours as RGBA values packed into ints: https://reactnative.dev/docs/colors#color-ints. It looks like this case was missed in D6226807 (https://github.com/facebook/react-native/commit/da047966e4c2064a48e02ff74830c99808d8194b) when we started typing the `StyleSheet` API with Flow.
Changelog: [General][Fixed] - Support numeric color values in StyleSheet's Flow types
Reviewed By: yungsters
Differential Revision: D34140748
fbshipit-source-id: 5bfe2995a473260926fa3c8b6926bb841615d393
Summary:
Changelog: [Internal]
Fixes `normalizeColor` to always return the normalized color. Previously, when normalization was delegated to `normalizeColorObject`, we would return the *original* color object, which is a bug.
Reviewed By: javache
Differential Revision: D34048595
fbshipit-source-id: 083cbe36be2311ea9cffe8ef61e6a986840aec71
Summary:
This diff runs the codemod to add type annotations to function parameters in preparation for Flow's local type inference (LTI) project. I ran the codemod over xplat/js and reverted any files that had flow errors in them. See the list of commands run to see the regeneration of various files.
Changelog:
[Internal][Changed] - Added type annotations
Reviewed By: yungsters
Differential Revision: D32075270
fbshipit-source-id: 6a9cd85aab120b4d9e690bac142a415525dbf298
Summary:
Changes `react-native/normalize-color` to be useable from Node.js by making the following changes:
1. Rename `base.js` to `index.js` so importing is more convenient.
2. Move Flow definitions into a seprate library definition flow so `index.js` can be consumed directly.
I also made a few improvements to the actual implementation:
1. Avoid allocating `matchers` for non-strings.
2. Avoid allocating an object of all the color keywords. This will reduce memory usage (in exchange for slightly larger compiled bytecode).
Changelog:
[General][Changed] - react-native/normalize-color now supports Node.js
Reviewed By: lunaleaps
Differential Revision: D30595908
fbshipit-source-id: e6279e9ff815d8d1f489811187deabfdf53b8fbf
Summary:
Simplifies the Flow type for `ReactNativeStyleAttributes`, an internal module.
Changelog:
[Internal]
Reviewed By: TheSavior
Differential Revision: D29019311
fbshipit-source-id: cf95dac4b8c2261812cc1d753255dfb905540759
Summary:
Deletes `StyleSheetValidation` because it is `prop-types` in disguise.
Changelog:
[General][Removed] - `StyleSheet.create` will no longer do DEV-time validation.
Reviewed By: TheSavior
Differential Revision: D29019310
fbshipit-source-id: bfe886d8dc09a1aa8dac4a73bfd62f481e3eb9e9
Summary:
Allow you to harvest the `UIAccessibilityContrastHigh` trait from iOS to show accessible colors when high contrast mode is enabled.
```jsx
// usage
PlatformColorIOS({
light: '#eeeeee',
dark: '#333333',
highContrastLight: '#ffffff',
highContrastDark: '#000000',
});
// {
// "dynamic": {
// "light": "#eeeeee",
// "dark": "#333333",
// "highContrastLight": "#ffffff",
// "highContrastDark": "#000000",
// }
// }
```
This is how apple's own dynamic system colors work under the hood (https://developer.apple.com/design/human-interface-guidelines/ios/visual-design/color/#dynamic-system-colors)
---
The react native docs mention that more keys may become available in the future, which this PR is adding:
> In the future, more keys might become available for different user preferences, like high contrast.
https://reactnative.dev/docs/dynamiccolorios
## Changelog
<!-- Help reviewers and the release process by writing your own changelog entry. For an example, see:
https://github.com/facebook/react-native/wiki/Changelog
-->
[iOS] [Added] - High contrast dynamic color options for dark and light mode.
Pull Request resolved: https://github.com/facebook/react-native/pull/31651
Test Plan: Added unit tests for `normalizeColor` to pass the high contrast colors downstream to RCTConvert
Reviewed By: lunaleaps
Differential Revision: D28922536
Pulled By: p-sun
fbshipit-source-id: f81417f003c3adefac50e994e62b9be14ffa91a1
Summary:
If an invalid color is supplied to a native component that expects `Array<ColorValue>`, it is currently possible to produce an array that contains null or undefined elements. This is problematic because the native component may not know what to do with the null or undefined value.
This changes `processColorArray` to always return an array with valid color values. Any invalid color values will fallback to being transparent black, `0x00000000`.
Changelog:
[General][Fixed] - For native components that accept color arrays, invalid elements will now fallback to transparent with a console error.
Reviewed By: JoshuaGross
Differential Revision: D27542291
fbshipit-source-id: efa5d130644b3aee68d2b9fad6fdb61af11a2966
Summary:
ES Modules implicitly enable strict mode. Adding the "use strict" directive is, therefore, not required.
This diff removes all "use strict" directives from ES modules.
Changelog:
[Internal]
Reviewed By: motiz88
Differential Revision: D26172715
fbshipit-source-id: 57957bcbb672c4c3e62b1db633cf425c1c9d6430
