Summary:
changelog: [internal]
If nodesManager has the information if animated node is managed by Fabric, we can't decide if the operation queue should be flushed before it is flushed. Therefore, keep the information about animated nodes inside a set instead of nodesManager.
For simplicity, I will refer to class `RCTNativeAnimatedTurboModule` as *NativeAnimated* and to `RCTNativeAnimatedNodesManager` as *NodesManager*
Notice that each call to *NativeAnimated* is queued up in `_operations` or `_preOperations`. When the queues are flushed, only then methods are called on `RCTNativeAnimatedNodesManager`.
There are two mechanisms that flush operations.
One is triggered by `RCTMountingManager` before mounting operations are applied and after they are applied. This works fine but is important to paint the picture.
The second mechanism is inside `[RCTNativeAnimatedTurboModule startAnimatingNode]`. It flushes the queues for Fabric nodes only (not sure why Fabric nodes only, I couldn't find any explanation in old diffs). It checks with *NativeAnimated* if a node is managed by Fabric. Keep in mind, *NodesManager* only knows about the nodes when the queues have been flushed.
Exampe:
JavaScript calls methods on *NativeAnimated*.
For example:
1. `createNode`
2. `connectAnimatedNodeToView`
3. `startAnimatingNode`. (here, the queues should be flushed, since we are in Fabric)
All of these operations are queued up and for as long as `RCTMountingManager` executes mounting, all proceeds as expected.
But if those operations happen after mounting phase, `startAnimatingNode` will not flush the operations queues, because it can't tell if nodeTag is managed by fabric or it isn't. This is because *NodesManager* hasn't been notified about any new nodes.
Reviewed By: JoshuaGross, p-sun
Differential Revision: D30053890
fbshipit-source-id: b7fe24861d5300f9cfefa813a53df8330fa56d86
Summary:
Merges the Facebook-internal Buck target definitions in `Libraries/` into the BUCK file at the root of the repo (which is currently not synced to GitHub at all). This does not affect how React Native is built in open source.
Changelog: [Internal]
Reviewed By: GijsWeterings
Differential Revision: D27967499
fbshipit-source-id: 39c51a544b3868242598072d24cb6cfb5a6e2d8c
Summary:
Changelog: [internal]
Make sure the order of call is preserved for `NativeAnimatedModule`. The order of calls to NativeAnimatedModule needs to be preserved because its internals depend on it. For example, if you `getValue` is called before `createAnimatedNode`, it causes a crash.
To resolve it, we need to enqueue `getValue` onto operationQueue.
Reviewed By: JoshuaGross
Differential Revision: D30035911
fbshipit-source-id: bbd698a96cada5d2b1312a1a689ca99b04a07cdc
Summary:
This small PR updates the Flow types used in Dimensions. The following changes has been made:
* generic types has been replaced with types from `NativeDeviceInfo` (which already were used in event subscription update)
* ~simplification of `DisplayMetricsAndroid` by spreading via intersection with `DisplayMetrics` type and removing shared properties~
> I have tried both notations, but according to the lint, it looks like a Native Modules typing limitation which requires redundancy / code duplication in cases like this.
## Changelog
<!-- Help reviewers and the release process by writing your own changelog entry. For an example, see:
https://github.com/facebook/react-native/wiki/Changelog
-->
[Internal] [Changed] - update Dimensions API Flow types
Pull Request resolved: https://github.com/facebook/react-native/pull/31898
Test Plan: Running `yarn flow` in the workspace yields no errors.
Reviewed By: yungsters
Differential Revision: D29932940
Pulled By: GijsWeterings
fbshipit-source-id: bf97bb972964c585207e2450ccf71d932555e291
Summary:
Changelog: [Internal]
If generators are provided natively, that should suggest that the JS source
code did not go through the regenerator-transform (e.g. in Metro Hermes profile),
then there is no need to set up the regenerator runtime.
This should save some work during the Core initialization.
Reviewed By: motiz88
Differential Revision: D29986751
fbshipit-source-id: 129f5122e8e4c05535ee2aa5da6970a66843e8cd
Summary:
Changelog: [Internal]
This diff only extracted the `isNativeFunction` used in `setUpTimers`
into the `FeatureDetection` utility, but later we will add more functions
in it and reuse them in other places.
Reviewed By: RSNara
Differential Revision: D29986750
fbshipit-source-id: 6e48e38d92ceccb35eead3c52e00e1eecb81b5b0
Summary:
preferred instead of preffered
## Changelog
<!-- Help reviewers and the release process by writing your own changelog entry. For an example, see:
https://github.com/facebook/react-native/wiki/Changelog
-->
[CATEGORY] [TYPE] - Message
Pull Request resolved: https://github.com/facebook/react-native/pull/29858
Reviewed By: charlesbdudley
Differential Revision: D29998754
Pulled By: sota000
fbshipit-source-id: f13fef58e9154ddf8087944d53e022fb9afa6b1b
Summary:
occured -> occurred
## Changelog
<!-- Help reviewers and the release process by writing your own changelog entry. For an example, see:
https://github.com/facebook/react-native/wiki/Changelog
-->
[Internal] [Fixed] - Fixed typo in VirtualizedList-test.js
Pull Request resolved: https://github.com/facebook/react-native/pull/31756
Test Plan: NONE
Reviewed By: lunaleaps
Differential Revision: D29975153
Pulled By: charlesbdudley
fbshipit-source-id: 966d90df0bf015b4a6a2e3b1bf88c66b61161a7a
Summary:
Changelog: [Internal]
Historically, Immediate API is implemented upon the React Native's
internal microtask-y queue (known as "immediate queue"), which
is the same queue Promise polyfill is operating on.
To make React Native suitable of using the built-in Promises from JSVMs,
which usually enqueues to the JSVM internal microtask queue and has no
access to React Native microtask-y queue, we need to migrate the
Immediate API to use the JSVM microtask queue as well to preserve the
semantics of code relies on the interleaving of promises and immediates.
To do that, this diff implement a shim layer for immediate APIs via the
new `global.queueMicrotask` API (which enqueues to JSVM) in JS, by wrapping
the immediate callback into a "microtask callback", which validate the
`immediate ID` against `clearedImmediate` Set before invoking it.
Reviewed By: RSNara
Differential Revision: D29845305
fbshipit-source-id: c2ed3fed426a5316b1e0dfbfaad51706d1765d4d
Summary:
Changelog:
[General][Added] - Add global.queueMicrotask
`queueMicrotask` is a relatively recent API defined in the WHATWG HTML spec
and it's been widely adopted by all web browsers and Node.js.
This diff introduced it to React Native by polyfilling it via a lazily-allocated
resolved Promise, or calling directly into a fast path provided by Hermes.
Reviewed By: RSNara
Differential Revision: D29838852
fbshipit-source-id: 8c4378b1b713fb8b0da5e67f92ba2ea9838766f7
Summary:
Changelog: [Internal]
This diff replaced all the internal occurrences of "Immediate" with
"ReactNativeMicrotask" in the legacy bridge and then polyfilled the
original immediate APIs during the timer setup phases as aliases of them.
Note that this diff is part of a larger refactoring.
Reviewed By: RSNara
Differential Revision: D29785430
fbshipit-source-id: 7325d2a7358a6c9baa3e9abb8acf90414de5072f
Summary:
Fixed a link in a comment that lead to dead link
whatwg-url changed the source directory from `lib` to `src`
## Changelog
<!-- Help reviewers and the release process by writing your own changelog entry. For an example, see:
https://github.com/facebook/react-native/wiki/Changelog
-->
[INTERNAL] [FIXED] - fix dead link in a comment
Pull Request resolved: https://github.com/facebook/react-native/pull/31902
Test Plan: - [ ] Changed URL opens properly
Reviewed By: charlesbdudley
Differential Revision: D29915170
Pulled By: lunaleaps
fbshipit-source-id: 00b69db82f51d16cf887cd4540a159132ad7d771
Summary:
* it says focusTextInput but the function name is blurTextInput
* probably the message was copy-pasted from `focusTextInput` where is the same error message.
Changelog: [Internal]
Reviewed By: arhelmus
Differential Revision: D29845922
fbshipit-source-id: 21fd3e572c32779c13f6909556153d07dc7a416f
Summary:
Fix for https://github.com/facebook/react-native/issues/27952.
Noticed more than just `AUTOFILL_HINT_NEW_PASSWORD` were missing, this PR will support every `AUTOFILL_HINT_*` type.
## Changelog
[Android] [Added] - Added all autofill types to TextEdit
Pull Request resolved: https://github.com/facebook/react-native/pull/28008
Reviewed By: sturmen
Differential Revision: D29766235
Pulled By: mdvacca
fbshipit-source-id: d5171aef8092d37716fddcb6f3443637a4af8481
Summary:
Changelog:
[General][Added] - Added data field to markerPoint to allow callers to add additional arbitrary string data to logged points
Reviewed By: dmitry-voronkevich
Differential Revision: D29764274
fbshipit-source-id: b0d21e3b20a5353351424afb10c950f3e8689887
Summary:
This change adds a series of snapshot tests to validate the render output of VirtualizedList in mixed scenarios. Jest timer mocks are used to measure rendering at different ticks. These test cases mostly center around realization logic, to help prevent regressions when chaning internal state representation.
## Changelog
<!-- Help reviewers and the release process by writing your own changelog entry. For an example, see:
https://github.com/facebook/react-native/wiki/Changelog
-->
[Internal] [Added] - Add unit tests for VirtualizedList render quirks
Pull Request resolved: https://github.com/facebook/react-native/pull/31401
Test Plan: Ran the added UTs locally.
Reviewed By: lunaleaps
Differential Revision: D28017750
Pulled By: rozele
fbshipit-source-id: df9684c4ac80a8732f3e88e7496815127213832e
Summary:
1. [ios] upgrade folly to 2021.06.28.00 which aligned to android.
2. folly compile setting from c++14 -> c++17: _this folly requires c++17 for `std::unordered_map::insert_or_assign`._
3. boost 1.63.0 -> 1.76.0: _the old boost does not support c++17._
4. deprecating react-native-community/boost-for-react-native: _by cocoapods installer, we could download the official target._
## Changelog
[iOS] [Changed] - Upgrade folly to 2021.06.28.00 and boost to 1.76.0
Pull Request resolved: https://github.com/facebook/react-native/pull/31840
Test Plan: CI passed
Reviewed By: fkgozali
Differential Revision: D29668480
Pulled By: yungsters
fbshipit-source-id: 98eae9ca47f489dcea91974e6f5e9dcb4d66c40c
Summary:
Android react-native `TextInput` component does nothing if prop `keyboardType` is `url` value. This PR solves that problem.
## Changelog
[Android] [Added] - Add support to URI keyboard type in Android
Pull Request resolved: https://github.com/facebook/react-native/pull/31781
Test Plan:
Before change:
{F630980679}
After Change:
{F630986399}
Reviewed By: lunaleaps
Differential Revision: D29517822
Pulled By: sshic
fbshipit-source-id: 1bda29584a3799570f34e772b5589b59ac80c524
Summary:
Updates documentation in React Native to reference `main` (or `HEAD` for URLs) instead of `master`.
Part of https://github.com/facebook/react-native/issues/31788.
Changelog:
[General][Changed] - Update documentation reference from `master` to `main` or `HEAD`.
Reviewed By: JoshuaGross
Differential Revision: D29717128
fbshipit-source-id: 0b0babd8407c6fd3d0e5431f6eaf976059731d6f
Summary:
Issue https://github.com/facebook/react-native/issues/30964 .When using a screen reader, flatlist does not announce entrance/ exit from the flat list.
## Changelog
[Android] [Changed] - Added support for accessibility role of "list" for flatlist and sectioned list
Pull Request resolved: https://github.com/facebook/react-native/pull/31630
Test Plan: I have added accessibility role prop in flatlist and sectioned list in rntester app, that will announce entrance/ exit from flatlist and sectioned list.
Reviewed By: kacieb
Differential Revision: D29599351
Pulled By: blavalla
fbshipit-source-id: e16ec69a694780d12f15f88a1e6bb5d7d77ac15f
Summary:
Add animation queuing back into createAnimatedComponent_EXPERIMENTAL.js, which is a concurrent-safe version of createAnimatedComponent.
T93269035 for details on why this is needed.
# How does this work?
In the old createAnimatedComponent, Animations were queued by calling `setWaitingForIdentifier` before render, and then calling `unsetWaitingForIdentifier` after render.
In this diff, instead we are calling `setWaitingForIdentifier` in an `useLayoutEffect` before calling `useAnimatedProps`, and we are calling `unsetWaitingForIdentifier` in a `useEffect` after `useAnimatedProps`. So the ordering for the effects are:
1. `useLayoutEffect` with `setWaiting`
2. `useLayoutEffect`s in `useAnimatedProps`
3. `useEffect`s in `useAnimatedProps`
4. `useEffect` with `unsetWaiting`.
There's a React guarantee that **if one effect is called, all of them will be called**, so we don't have a concern about the queue getting locked.
## **Main concerns:**
1. This works in my test cases, but it's not the same behavior as the old createAnimatedComponent (which is wait before and unset wait after render). This may still be ok because the relevant side effects in render from that component have been moved to `useLayoutEffect` or `useEffect` in `useAnimatedProps` (so the ordering is still the same?).
2. I'm not sure about the ordering of `onLayoutEffect`, `onLayout` callbacks, and `useEffect`. createAnimatedComponent_EXPERIMENTAL doesn't use `onLayout`, but with this new method of queuing, **`onLayout` calls will likely be called before the animation queue has been flushed**. It's not clear to me whether this is bad.
Changelog: [Internal]
Reviewed By: yungsters
Differential Revision: D29467458
fbshipit-source-id: 2be23a8968404526d0fa394a7879fda8b5ffbfdc
Summary:
iOS 13 added a new property to `UIScrollView`: `automaticallyAdjustsScrollIndicatorInsets`, which is `YES` by default. The property changes the meaning of the `scrollIndicatorInsets` property. When `YES`, any such insets are **in addition to** whatever insets would be applied by the device's safe area. When `NO`, the iOS <13 behavior is restored, which is for such insets to not account for safe area.
In other words, this effects ScrollViews that underlay the device's safe area (i.e. under the notch). When `YES`, the OS "automatically" insets the scroll indicators, when `NO` it does not.
There are two problems with the default `YES` setting:
1. It means applying `scrollIndicatorInsets` to a `ScrollView` has a different effect on iOS 13 versus iOS 12.
2. It limits developers' control over `scrollIndicatorInsets`. Since negative insets are not supported, if the insets the OS chooses are too large for your app, you cannot fix it.
Further explanation & sample code is available in issue https://github.com/facebook/react-native/issues/28140 .
This change sets the default for this property to `NO`, making the behavior consistent across iOS versions, and allowing developers full control.
## Changelog
<!-- Help reviewers and the release process by writing your own changelog entry. For an example, see:
https://github.com/facebook/react-native/wiki/Changelog
-->
[iOS] [Changed] - ScrollView scrollIndicatorInsets to not automatically add safe area on iOS13+
Pull Request resolved: https://github.com/facebook/react-native/pull/29809
Test Plan:
Updated the RNTester example to explain what to expect. Also removed the `pageScreen` modal example for now as mentioned in my Github comment.
{F628636466}
Here are screenshots of the demo app (from the original bug) before (with safe area applied to insets) & after (without safe area applied to insets):


Reviewed By: p-sun
Differential Revision: D28229603
Pulled By: lunaleaps
fbshipit-source-id: 2e774ae150b1dc41680b8b7886c7ceac8808136a
Summary:
A CellRenderMask helps track regions of cells/spacers to render. It's API allows adding ranges of cells, where its otput be an ordered list of contiguous spacer/non-spacer ranges.
The implementation keeps this region list internally, splitting or merging regions when cells are added. This output will be used by the render function of a refactored VirtualizedList.
## Changelog
<!-- Help reviewers and the release process by writing your own changelog entry. For an example, see:
https://github.com/facebook/react-native/wiki/Changelog
-->
[Internal] [Added] - Add "CellRenderMask" Region Tracking Structure
Pull Request resolved: https://github.com/facebook/react-native/pull/31420
Test Plan: Validated via UTs.
Reviewed By: lunaleaps
Differential Revision: D28293161
Pulled By: rozele
fbshipit-source-id: a5e4e2144a90387aabe0974650429018440abf67
Summary:
Changes the `ImageURISource` Flow type into an interface.
- This enables both objects and class instances to be subtypes of `ImageURISource`.
- This makes it invalid to spread `ImageURISource` as a type, so `interface X extends ImageURISource` can instead be used.
- This makes it invalid to spread `ImageURISource` as a value, so `getImageSourceProperties(x)` can instead be used.
- This makes it invalid to use `$Exact` with `ImageURISource`.
Changelog:
[General][Changed] - `ImageURISource` Flow type is now an interface instead of an object.
Reviewed By: timrc
Differential Revision: D29323508
fbshipit-source-id: 647c2f9b0bfead6d7e56bdb7108e623cbf8b6c89
Summary:
This was causing an upload error in FB Dating, will need to re-land with the fix.
Changelog: [Internal]
Reviewed By: fkgozali
Differential Revision: D29320144
fbshipit-source-id: 5d09dd2171b5696afe89cffa064947f0a0bb413d
Summary: Changelog: [Internal] - Animated.event from my limited understanding attaches Animated.Values to native views. In terms of animation, Animated.Values are already handled by AnimatedMock to skip interpolation.
Reviewed By: GijsWeterings
Differential Revision: D29241590
fbshipit-source-id: 98650883dad53d6f77dbc398ba0cac903194deca
Summary:
This diff refactors the Image component in order to log the component hierarchy stacktraces for images rendering non-fb sources
changelog: [internal] internal
Reviewed By: yungsters
Differential Revision: D29266451
fbshipit-source-id: 826230b1a18a5809b340ef0767d80a281e20477a
Summary:
This diff adds logging to uncover what are the ReactNative screens that are rendering images using NON-Facebook domains
changelog: [internal] internal
Reviewed By: yungsters
Differential Revision: D29179990
fbshipit-source-id: 85f6380848d1ac1461419bc29c4666be389fb87a
Summary:
Changes `ImageURISource` back to an object type.
It was changed to an interface by D27193522 (https://github.com/facebook/react-native/commit/05418f8fcc566fb9e394e5843f8680aaed35b8fa), but that is not the right direction for this type.
Changelog:
[Internal] - There was no changelog entry for this initially, so the revert can also be omitted.
Reviewed By: lunaleaps
Differential Revision: D29205798
fbshipit-source-id: 727ef70bbf47d14b163ecf5d6f31184da51c894a
Summary:
## Context
In dev mode, Metro hijacks the JavaScript `console`, and prints all logs into the terminal running the Metro server.
## Problem
We have no way to distinguish between Bridge mode and Bridgeless mode logs. This makes it hard to tell catch warnings and errors are coming from bridgeless mode.
## Changes
- This diff adds a "NOBRIDGE" prefix to all React Native Metro logs coming from Bridgeless mode.
- Bridge mode console logs/warnings/errors are **unaffected**.
Changelog: [Internal]
Reviewed By: PeteTheHeat
Differential Revision: D29152292
fbshipit-source-id: 257b8140327cfd7a0a10aa229bcb88117231e452
Summary:
Fixes https://github.com/facebook/react-native/issues/27099
When you upload a local file using XHR + the `FormData` API, RN uses `RCTNetworkTask` to retrieve the image file data from the local filesystem (request URL is a file:// URL) ([code pointer](https://github.com/facebook/react-native/blob/master/Libraries/Network/RCTNetworking.mm#L398)). As a result, if you are uploading a local image file that is in the app's directory `RCTNetworkTask` will end up using `RCTLocalAssetImageLoader` to load the image, which reads the image into a `UIImage` and then re-encodes it using `UIImageJPEGRepresentation` with a compression quality of 1.0, which is the higest ([code pointer](https://github.com/facebook/react-native/blob/4c5182c1cc8bafb15490adf602c87cb5bf289ffd/Libraries/Image/RCTImageLoader.mm#L1114)). Not only is this unnecessary, it ends up inflating the size of the jpg if it had been previously compressed to a lower quality.
With this PR, this issue is fixed by forcing the `RCTFileRequestHandler` to be used when retrieving local files for upload, regardless of whether they are images or not. As a result, any file to be uploaded gets read into `NSData` which is the format needed when appending to the multipart body.
I considered fixing this by modifying the behavior of how the handlers were chosen, but this felt like a safer fix since it will be scoped to just uploads and wont affect image fetching.
## Changelog
[iOS] [Fixed] - Avoid re-encoding images when uploading local files
Pull Request resolved: https://github.com/facebook/react-native/pull/31457
Test Plan:
The repro for this is a bit troublesome, especially because this issue doesn't repro in RNTester. There is [some code](https://github.com/facebook/react-native/blob/master/packages/rn-tester/RNTester/AppDelegate.mm#L220) that is to be overriding the handlers that will be used, excluding the `RCTImageLoader`. I had to repro this in a fresh new RN app.
1. Create a blank RN app
2. Put an image in the folder of the app's install location. This would be similar to where files might be placed after an app downloads or captures an image.
3. Set up a quick express server that accepts multipart form uploads and stores the files
4. Trigger an upload via react native
```
const data = new FormData();
data.append('image', {
uri:
'/Users/arthur.lee/Library/Developer/CoreSimulator/Devices/46CDD981 (https://github.com/facebook/react-native/commit/d0c8cb12f21604fd9730e275a52816d7fd00a826)-9164-4925-9025-1A76C0D9 (https://github.com/facebook/react-native/commit/1946aee3d9696384d38890269ea705cafd472827)F0F5/data/Containers/Bundle/Application/B1E8A764-6221-4EA9-BE9A-2CB1699FD218 (https://github.com/facebook/react-native/commit/1c92b1cff623ea3f3b78238b146ab001626ef305)/test.app/test.bundle/compressed.jpg',
type: 'image/jpeg',
name: 'image.jpeg',
});
fetch(`http://localhost:3000/upload`, {
method: 'POST',
headers: {'Content-Type': 'multipart/form-data'},
body: data,
}).then(console.log);
```
5. Trigger the upload with and without this patch
Original file:
```
$ ls -lh
total 448
-rw-r--r-- 1 arthur.lee staff 223K Apr 29 17:08 compressed.jpg
```
Uploaded file (with and without patch):
```
$ ls -lh
total 1624
-rw-r--r--@ 1 arthur.lee staff 584K Apr 29 17:11 image-nopatch.jpeg
-rw-r--r--@ 1 arthur.lee staff 223K Apr 29 17:20 image-withpatch.jpeg
```
Would appreciate pointers on whether this needs to be tested more extensively
Reviewed By: yungsters
Differential Revision: D28630805
Pulled By: PeteTheHeat
fbshipit-source-id: 606a6091fa3e817966548c5eb84b19cb8b9abb1c
Summary:
If function name is an empty string then it would fail to parse the line. And not only that, it would cause the entire stack to be lost. This fixes the issue by replacing `.+?` with `.*?`.
For example this line fails to parse:
```
at global (:2:4)
```
Changelog:
[General][Fixed] - Fixed bug parsing hermes call stacks when the file name is empty
Reviewed By: yungsters
Differential Revision: D29063192
fbshipit-source-id: 604e457af51f852fe547e6424283631ae148897d
Summary:
Rewrites `ReactNativeStyleAttributes` so that it is statically defined.
This means it will no longer require a handful of modules that defines `prop-types` only to use their keys.
Functionally, this should be equivalent to what was there before.
Changelog:
[Internal]
Reviewed By: TheSavior
Differential Revision: D29019308
fbshipit-source-id: 47f85a8c7703a133c68c20c7f3e14e1026ce4ff2
Summary:
Simplifies the Flow type for `ReactNativeStyleAttributes`, an internal module.
Changelog:
[Internal]
Reviewed By: TheSavior
Differential Revision: D29019311
fbshipit-source-id: cf95dac4b8c2261812cc1d753255dfb905540759
Summary:
Deletes `StyleSheetValidation` because it is `prop-types` in disguise.
Changelog:
[General][Removed] - `StyleSheet.create` will no longer do DEV-time validation.
Reviewed By: TheSavior
Differential Revision: D29019310
fbshipit-source-id: bfe886d8dc09a1aa8dac4a73bfd62f481e3eb9e9
Summary:
Removes the unnecessary dependency from `DeprecatedTextInputPropTypes` on `Text`. Just use `DeprecatedTextPropTypes` directly.
Changelog:
[Internal]
Reviewed By: TheSavior
Differential Revision: D29017596
fbshipit-source-id: b816c2261bf473e02473d84984cfb3d5a63ec8c1