Summary:
Adds support for Animated.Color with native driver for iOS. Reads the native config for the rbga channel AnimatedNodes, and on update(), converts the values into a SharedColor.
Followup changes will include support for platform colors.
Ran update_pods: https://www.internalfb.com/intern/wiki/React_Native/Preparing_to_Ship/Open_Source_Pods/
Changelog:
[iOS][Added] - Support running animations with AnimatedColor with native driver
Reviewed By: sammy-SC
Differential Revision: D33860583
fbshipit-source-id: 990ad0f754a21e3939f2cb233bcfa793ef12eb14
Summary:
changelog: [internal]
`_rootTag` is never assigned to and never read, let's remove it.
Reviewed By: RSNara
Differential Revision: D30667860
fbshipit-source-id: f4b89ebe6b6d26559188b0e19682f5ac765d40b6
Summary:
changelog: [internal]
If nodesManager has the information if animated node is managed by Fabric, we can't decide if the operation queue should be flushed before it is flushed. Therefore, keep the information about animated nodes inside a set instead of nodesManager.
For simplicity, I will refer to class `RCTNativeAnimatedTurboModule` as *NativeAnimated* and to `RCTNativeAnimatedNodesManager` as *NodesManager*
Notice that each call to *NativeAnimated* is queued up in `_operations` or `_preOperations`. When the queues are flushed, only then methods are called on `RCTNativeAnimatedNodesManager`.
There are two mechanisms that flush operations.
One is triggered by `RCTMountingManager` before mounting operations are applied and after they are applied. This works fine but is important to paint the picture.
The second mechanism is inside `[RCTNativeAnimatedTurboModule startAnimatingNode]`. It flushes the queues for Fabric nodes only (not sure why Fabric nodes only, I couldn't find any explanation in old diffs). It checks with *NativeAnimated* if a node is managed by Fabric. Keep in mind, *NodesManager* only knows about the nodes when the queues have been flushed.
Exampe:
JavaScript calls methods on *NativeAnimated*.
For example:
1. `createNode`
2. `connectAnimatedNodeToView`
3. `startAnimatingNode`. (here, the queues should be flushed, since we are in Fabric)
All of these operations are queued up and for as long as `RCTMountingManager` executes mounting, all proceeds as expected.
But if those operations happen after mounting phase, `startAnimatingNode` will not flush the operations queues, because it can't tell if nodeTag is managed by fabric or it isn't. This is because *NodesManager* hasn't been notified about any new nodes.
Reviewed By: RSNara
Differential Revision: D30099010
fbshipit-source-id: d3fc021dd4346d1cbbda3b49ecd9d982c543e705
Summary:
Pull Request resolved: https://github.com/facebook/react-native/pull/29800
I changed this line in D23272735 (https://github.com/facebook/react-native/commit/700960c9f1a27a12d703b4f0a17673690799f019), to conform to normal ObjC semantics: impl files can import their header by file name.
I forgot that their's some special linking logic happening in this directory that doesn't allow for this import type.
This diff just reverts one line to fix CircleCI builds.
Changelog: [Internal]
Reviewed By: shergin
Differential Revision: D23399893
fbshipit-source-id: 976199c659522effd632aaeb38616d0d6c962f1f
Summary:
`RCTPropsAnimatedNode` uses the bridge to access it's current surface presenter to perform animations.
In bridgeless mode, the surface presenter is not owned by the bridge. Instead, pass the surface presenter through the ownership chain:
`RCTNativeAnimated*Module` -> `RCTNativeAnimatedNodesManager` -> `RCTPropsAnimatedNode`
`RCTSurfacePresenter` should not be strongly held by any of these animation internals. If it gets destroyed at a higher level, animations should not be completed.
Changelog: [Internal]
Differential Revision: D23272735
fbshipit-source-id: ce08ee3b59ac2ba70e31cebb7ba8e9f3a644c848
Summary:
Changelog: [Internal]
# Problem
Before every update, restoreDefaults is called on animated nodes. In paper this makes sure no stale properties are on animated nodes. In paper it works fine because restoreDefaults is called before mounting and animations are triggered after mounting within single commit.
Details: https://github.com/facebook/react-native/pull/11819
In Fabric however it is called outside of other mounting operations and it applies default values to the view and then re-applies animated values.
Reviewed By: JoshuaGross
Differential Revision: D21786765
fbshipit-source-id: a2cb6d6d9cbd39d4c403c97c2f51e7d92078102f
Summary: The previous rename from RCT->RN prefix ended up causing some confusions on which prefix to use for which files and under what circumstances. To avoid further confusion before we're done with the re-architecture project, let's keep them as RCT.
Reviewed By: mdvacca
Differential Revision: D16705566
fbshipit-source-id: 395bff771c84e5ded6b2261a84c7549df1e6c5e5
Summary: Fabric ObjC(++) files will be prefixed by RN* for the time being, this codemod is a simple rename. This includes `interface` and `protocol` definition
Reviewed By: PeteTheHeat, yungsters
Differential Revision: D16611524
fbshipit-source-id: 868d2571ea2414dde4cbb3b75b1334b779b5d832
Summary:
This is my proposal for fixing `use_frameworks!` compatibility without breaking all `<React/*>` imports I outlined in https://github.com/facebook/react-native/pull/25393#issuecomment-508457700. If accepted, it will fix https://github.com/facebook/react-native/issues/25349.
It builds on the changes I made in https://github.com/facebook/react-native/pull/25496 by ensuring each podspec has a unique value for `header_dir` so that framework imports do not conflict. Every podspec which should be included in the `<React/*>` namespace now includes it's headers from `React-Core.podspec`.
The following pods can still be imported with `<React/*>` and so should not have breaking changes: `React-ART`,`React-DevSupport`, `React-CoreModules`, `React-RCTActionSheet`, `React-RCTAnimation`, `React-RCTBlob`, `React-RCTImage`, `React-RCTLinking`, `React-RCTNetwork`, `React-RCTPushNotification`, `React-RCTSettings`, `React-RCTText`, `React-RCTSettings`, `React-RCTVibration`, `React-RCTWebSocket` .
There are still a few breaking changes which I hope will be acceptable:
- `React-Core.podspec` has been moved to the root of the project. Any `Podfile` that references it will need to update the path.
- ~~`React-turbomodule-core`'s headers now live under `<turbomodule/*>`~~ Replaced by https://github.com/facebook/react-native/pull/25619#issuecomment-511091823.
- ~~`React-turbomodulesamples`'s headers now live under `<turbomodulesamples/*>`~~ Replaced by https://github.com/facebook/react-native/pull/25619#issuecomment-511091823.
- ~~`React-TypeSaferty`'s headers now live under `<TypeSafety/*>`~~ Replaced by https://github.com/facebook/react-native/pull/25619#issuecomment-511040967.
- ~~`React-jscallinvoker`'s headers now live under `<jscallinvoker/*>`~~ Replaced by https://github.com/facebook/react-native/pull/25619#issuecomment-511091823.
- Each podspec now uses `s.static_framework = true`. This means that a minimum of CocoaPods 1.5 ([released in April 2018](http://blog.cocoapods.org/CocoaPods-1.5.0/)) is now required. This is needed so that the ` __has_include` conditions can still work when frameworks are enabled.
Still to do:
- ~~Including `React-turbomodule-core` with `use_frameworks!` enabled causes the C++ import failures we saw in https://github.com/facebook/react-native/issues/25349. I'm sure it will be possible to fix this but I need to dig deeper (perhaps a custom modulemap would be needed).~~ Addressed by https://github.com/facebook/react-native/pull/25619/commits/33573511f02f3502a28bad48e085e9a4b8608302.
- I haven't got Fabric working yet. I wonder if it would be acceptable to move Fabric out of the `<React/*>` namespace since it is new? �
## Changelog
[iOS] [Fixed] - Fixed compatibility with CocoaPods frameworks.
Pull Request resolved: https://github.com/facebook/react-native/pull/25619
Test Plan:
### FB
```
buck build catalyst
```
### Sample Project
Everything should work exactly as before, where `use_frameworks!` is not in `Podfile`s. I have a branch on my [sample project](https://github.com/jtreanor/react-native-cocoapods-frameworks) here which has `use_frameworks!` in its `Podfile` to demonstrate this is fixed.
You can see that it works with these steps:
1. `git clone git@github.com:jtreanor/react-native-cocoapods-frameworks.git`
2. `git checkout fix-frameworks-subspecs`
3. `cd ios && pod install`
4. `cd .. && react-native run-ios`
The sample app will build and run successfully. To see that it still works without frameworks, remove `use_frameworks!` from the `Podfile` and do steps 3 and 4 again.
### RNTesterPods
`RNTesterPodsPods` can now work with or without `use_frameworks!`.
1. Go to the `RNTester` directory and run `pod install`.
2. Run the tests in `RNTesterPods.xcworkspace` to see that everything still works fine.
3. Uncomment the `use_frameworks!` line at the top of `RNTester/Podfile` and run `pod install` again.
4. Run the tests again and see that it still works with frameworks enabled.
Reviewed By: PeteTheHeat
Differential Revision: D16465247
Pulled By: PeteTheHeat
fbshipit-source-id: cad837e9cced06d30cc5b372af1c65c7780b9e7a
Summary:
Add example showing regression before this fix is applied.
https://github.com/facebook/react-native/pull/18187 Was found to introduce a regression in some internal facebook code-base end to end test which couldn't be shared. I was able to create a reproducible demo of a regression I found, and made a fix for it. Hopefully this will fix the internal test, such that the pr can stay merged.
## Changelog
[GENERAL] [Fixed] - Fix connection of animated nodes and scroll offset with useNativeDriver.
Pull Request resolved: https://github.com/facebook/react-native/pull/24177
Reviewed By: rickhanlonii
Differential Revision: D14845617
Pulled By: cpojer
fbshipit-source-id: 1f121dbe773b0cde2adf1ee5a8c3c0266034e50d
Summary:
Main change is to the property diffing - we now use the last known props set on the view rather than the default props to compute the diff. This requires exposing a `getProps` method on all view components which should be fine I think.
I also realized that in more complex animations with multiple nodes, the node that the animation starts on might not be connected to a view, so we don't know if it's fabric just based on that, so we have to do a recursive search through the children to find if there are any that are associated with a fabric view to decide we should start the animation immediately. Unfortunately there can still be a timing gap here since the animated API is async and the uimanager API is sync - I'll need to change the animated API to be sync to completely fix this.
Reviewed By: shergin
Differential Revision: D14732028
fbshipit-source-id: 882c056b0b63aa576f8e42439be405cf7fb3147a
Summary:
Allow interpolation of strings with useNativeDriver. This allows animating much more of react-native-svg. This PR adds support for native animation of lengths with units, path data, colors etc. Plus, fixing the redundantly created nodes and (and thus, previously incorrect) connection of native animated nodes, improving performance.
Docs will need to change, specifying that string interpolation works with the native driver as well.
[GENERAL] [Added] Add support for native driven string interpolation in Animated
[GENERAL] Fix exception: Expected node to be marked as "native"
[GENERAL] Fix connection of AnimatedNodes and creation of redundant AnimatedNodes
Pull Request resolved: https://github.com/facebook/react-native/pull/18187
Differential Revision: D14597147
Pulled By: cpojer
fbshipit-source-id: 82a948a95419236be7931a8cc4ff72f41e477e9c
Summary:
Right now we rely on the Paper UIManager to update animated node graphs - this hooks us into `RCTSurfacePresenter` in the same way so we are no longer reliant on Paper. Should also help with complex ordering corner cases with pre vs. post operations and restoring defaults when nodes are removed. More info:
https://github.com/facebook/react-native/pull/11819/files
Note that we don't have a way to differentiate animation nodes related to fabric views vs. paper views, so if paper and fabric are both rendering updates simultaneously it's possible they could get processed by the wrong callback. That should be very rare, rarely cause problems even if it does happen, and won't be a problem at all in a post-Paper world.
Reviewed By: shergin
Differential Revision: D14336760
fbshipit-source-id: 1c6a72fa67d5fedbaefb21cd4d7e5d75484f4fae
Summary:
We currently rely on the Paper UIManager calling `uiManagerWillPerformMounting` to flush the animated operations queue, which includes starting and stopping animations. This mostly works right now because Fabric always starts after Paper, but sometimes Paper doesn't fire `uiManagerWillPerformMounting` for a while, which can delay an animation starting.
To fix this, I force a flush of the queues on the UIThread whenever start or stop is called. This should be safe because the order of animation operations is still preserved, and start/stop are (almost?) always called in dedicated event handler loops, so any other updates like changing the way nodes are attached should already have been processed from a previous JS execution loop.
Reviewed By: JoshuaGross
Differential Revision: D14313502
fbshipit-source-id: 2a2b0c614fd1a591bd04b6b3fafcc09ff6c9d6e7
Summary:
Not super clean, but not terrible.
Unfortunately this still relies on the old Paper UIManager calling delegate methods to flush the operations queues. This will work for Marketplace You since Paper will be active, but we need to fix this, along with Animated Events which don't work at all yet.
Random aside: it seems like taps are less responsive in fabric vs. paper, at least on iOS. There is a sporadic delay between the touches event coming in nativly to the JS callback invoking the native module function to start the animation - this will need some debugging.
Reviewed By: shergin
Differential Revision: D14143331
fbshipit-source-id: 63a17eaafa1217d77a532a2716d9f886a96fae59
Summary: This change drops the year from the copyright headers and the LICENSE file.
Reviewed By: yungsters
Differential Revision: D9727774
fbshipit-source-id: df4fc1e4390733fe774b1a160dd41b4a3d83302a
Summary:
Some files have crept into the repo with the old license header. These are usually from PRs that were opened prior to the re-licensing of the project.
Let the script run, prior to fixing the errant files. The script outputs the following:
```
PATENTS crept into some new files?
--- /dev/fd/63 2018-03-01 01:42:48.250153746 +0000
+++ /dev/fd/62 2018-03-01 01:42:48.250153746 +0000
@@ -1 +1,9 @@
+Libraries/NativeAnimation/Nodes/RCTTrackingAnimatedNode.h
+Libraries/NativeAnimation/Nodes/RCTTrackingAnimatedNode.m
+ReactAndroid/src/main/java/com/facebook/react/animated/TrackingAnimatedNode.java
+ReactAndroid/src/main/java/com/facebook/react/views/text/CustomLetterSpacingSpan.java
+ReactCommon/yoga/yoga/YGLayout.cpp
+ReactCommon/yoga/yoga/YGLayout.h
+ReactCommon/yoga/yoga/YGStyle.cpp
+ReactCommon/yoga/yoga/YGStyle.h
scripts/circleci/check_license.sh
Exited with code 1
```
Fix the headers in these files and run the script again. No output, exit code 0.
Closes https://github.com/facebook/react-native/pull/18143
Reviewed By: sophiebits
Differential Revision: D7119356
Pulled By: hramos
fbshipit-source-id: d238e4d4a3ae320a2c8e625c2fa29690057a4814
Summary:
Includes React Native and its dependencies Fresco, Metro, and Yoga. Excludes samples/examples/docs.
find: ^(?:( *)|( *(?:[\*~#]|::))( )? *)?Copyright (?:\(c\) )?(\d{4})\b.+Facebook[\s\S]+?BSD[\s\S]+?(?:this source tree|the same directory)\.$
replace: $1$2$3Copyright (c) $4-present, Facebook, Inc.\n$2\n$1$2$3This source code is licensed under the MIT license found in the\n$1$2$3LICENSE file in the root directory of this source tree.
Reviewed By: TheSavior, yungsters
Differential Revision: D7007050
fbshipit-source-id: 37dd6bf0ffec0923bfc99c260bb330683f35553e
Summary:
This PR adds support for Animated tracking to Animated Native Driver implementation on Android and iOS.
Animated tracking allows for animation to be started with a "dynamic" end value. Instead of passing a fixed number as end value we can pass a reference to another Animated.Value. Then when that value changes, the animation will be reconfigured to drive the animation to the new destination point. What is important is that animation will keep its state in the process of updating "toValue". That is if it is a spring animation and the end value changes while the previous animation still hasn't settled the new animation will start from the current position and will inherit current velocity. This makes end value transitions very smooth.
Animated tracking is available in JS implementation of Animated library but not in the native implementation. Therefore until now, it wasn't possible to utilize native driver when using animated tracking. Offloading animation from JS thread turns out to be crucial for gesture driven animations. This PR is a step forward towards feature parity between JS and native implementations of Animated.
Here is a link to example video that shows how tracking can be used to implement chat heads effect: https://twitter.com/kzzzf/status/958362032650244101
In addition this PR fixes an issue with frames animation driver on Android that because of rounding issues was taking one extra frame to start. Because of that change I had to update a number of Android unit tests that were relying on that behavior and running that one additional animation step prior to performing checks.
As a part of this PR I'm adding three unit tests for each of the platforms that verifies most important aspects of this implementation. Please refer to the code and look at the test cases top level comments to learn what they do.
I'm also adding a section to "Native Animated Example" screen in RNTester app that provides a test case for tracking. In the example we have blue square that fallows the red line drawn on screen. Line uses Animated.Value for it's position while square is connected via tracking spring animation to that value. So it is ought to follow the line. When user taps in the area surrounding the button new position for the red line is selected at random and the value updates. Then we can watch blue screen animate to that position.
You can also refer to this video that I use to demonstrate how tracking can be linked with native gesture events using react-native-gesture-handler lib: https://twitter.com/kzzzf/status/958362032650244101
[GENERAL][FEATURE][Native Animated] - Added support for animated tracking to native driver. Now you can use `useNativeDriver` flag with animations that track other Animated.Values
Closes https://github.com/facebook/react-native/pull/17896
Differential Revision: D6974170
Pulled By: hramos
fbshipit-source-id: 50e918b36ee10f80c1deb866c955661d4cc2619b
Summary:
There was an edge case where sometimes a view could be added and removed in the same batch so this caused issues because we ran `disconnectAnimatedNodeFromView` before `connectAnimatedNodeToView`. This separates restoring default values from `disconnectAnimatedNodeFromView` so we can run only `restoreDefaultValues` on the pre-operations queue and just do nothing in case the view doesn't exist (it is fine because we know it will be removed immediately).
**Test plan**
Tested that native animations still work properly in RNTester and tested that the edge case crash was fixed.
Closes https://github.com/facebook/react-native/pull/14114
Differential Revision: D5128989
Pulled By: javache
fbshipit-source-id: 9f47a2d3aafeb06d8ed1a4dd1800b8af225edb7d
Summary:
Adds unit tests to the Native Animated implementation on iOS. This pretty much mirrors the tests we currently have on Android.
It also fixes 2 bugs I've found when adding the tests and pass the current time in `stepAnimation` instead of using `CACurrentMediaTime` to make testing easier.
- `stopListeningToAnimatedNodeValue` did not actually work at all, it should set the listener to nil.
- The finished value in the animation end callback was always true, this simplifies the `RCTAnimationDriver` interface to get rid of `removeAnimation` and fixes the end callback value.
**Test plan**
- Run the tests
- Make sure the UIExplorer example still works
Closes https://github.com/facebook/react-native/pull/13068
Differential Revision: D4786701
Pulled By: javache
fbshipit-source-id: a4f07e6eec1f363ca47b6f27984041793c915bfc
Summary:
This fixes a bug that causes properties to keep stale values because they were not restored to their default after being removed when their value was controlled by native animated.
To fix this we restore default values in `disconnectFromView` by updating views with null values for all props that we modified previously. However this causes another issue where we lose any props that were set by the normal process because NativeAnimated operations are always executed after UIManager operatations. To fix this I added a way to hook into UIManager view updating process to be able to execute NativeAnimated operations either before or after updating native views.
In the case of disconnecting we want to do it before updating views so that it does: Value changed by native animated -> value restored to default -> (optional) value updated by normal prop.
This PR also depends on #10658.
**Test plan**
Tested that this fixed a particular bug in an app that uses ex-navigation + native animations where a navbar w
Closes https://github.com/facebook/react-native/pull/11819
Differential Revision: D4752566
Pulled By: javache
fbshipit-source-id: 68ee28200ffeba859ae1b98ac753bd7dcb8910f0
Summary:
In theory, we should be able to animate any non-layout property, including custom ones. While there is still work to be done on the native side to fully enable this, we should start by dropping the prop whitelist.
Closes https://github.com/facebook/react-native/pull/10658
Differential Revision: D4379031
Pulled By: ericvicenti
fbshipit-source-id: fe9c30ea101e93a8b260d7d09a909fafbb82fee6
Summary:
This diff attempts to fix a number of iOS native animation bugs related to improper node invalidation and a race with view creation. The major issues were presented in #9120 as problems 3 and 3b, but I'll recap here:
The invalidation model we use is overly complicated and incomplete. The proper combination of `_needsUpdate` and `_hasUpdated` will result in nodes values being recomputed. However, we do not invalidate nodes in all the places we should, e.g. if we create a new view and attach it to an existing value node (see example in #9120). This diff chooses to remove the `_hasUpdated` flag, and simply relies on the `_needsUpdate` flag to mark a node as dirty.
We mark nodes as dirty when they are:
- created
- updated
- attached to new parents
- detached from old parents
- attached to a view
Calling `updateNodeIfNecessary` will, if necessary, compute all invalidated parent values before recomputing the node value. It will then apply the update, and mark the no
Closes https://github.com/facebook/react-native/pull/10663
Differential Revision: D4120301
Pulled By: mkonicek
fbshipit-source-id: e247afcb5d8c15999b8328c664b9f7e764d76a75
Summary:
To make React Native play nicely with our internal build infrastructure we need to properly namespace all of our header includes.
Where previously you could do `#import "RCTBridge.h"`, you must now write this as `#import <React/RCTBridge.h>`. If your xcode project still has a custom header include path, both variants will likely continue to work, but for new projects, we're defaulting the header include path to `$(BUILT_PRODUCTS_DIR)/usr/local/include`, where the React and CSSLayout targets will copy a subset of headers too. To make Xcode copy headers phase work properly, you may need to add React as an explicit dependency to your app's scheme and disable "parallelize build".
Reviewed By: mmmulani
Differential Revision: D4213120
fbshipit-source-id: 84a32a4b250c27699e6795f43584f13d594a9a82
Summary:
`flattenOffset` has proven extremely useful, especially when dealing with pan responders and other gesture based animations, but I've also found a number of use cases for the inverse. This diff introduces `extractOffset`, which sets the offset value to the base value, and resets the base value to zero. A common use case would be to extractOffset onGrant and flattenOffset onRelease.
Closes https://github.com/facebook/react-native/pull/10721
Differential Revision: D4145744
fbshipit-source-id: dc2aa31652df0b31450556f611db43548180c7dd
Summary:
Support static values (non-animated) in transform config like Android already does.
**Test plan**
Tested in UIExplorer native animated example by adding a transform with a static value and comparing with JS.
Closes https://github.com/facebook/react-native/pull/10664
Differential Revision: D4109515
fbshipit-source-id: 2d7de17d51d6df835c569fd45d2de8fc170bf928
Summary:
This diff adds support for native spring animations on iOS. This overlaps some spring work done by kmagiera on the Android side of things.
**Test plan (required)**
Run UIExplorer NativeAnimated examples before and after - compare the results. Pay special attention to the spring examples.
Closes https://github.com/facebook/react-native/pull/9048
Differential Revision: D4056088
Pulled By: foghina
fbshipit-source-id: a593408cb61cb850572bab4a0884f7157cece656
Summary:
This diff adds support for clamping on iOS. It separates out code originally submitted in #9048.
Test plan (required)
Run UIExplorer NativeAnimated examples before and after - compare the results. Pay special attention to the new clamped spring example.
Closes https://github.com/facebook/react-native/pull/9625
Differential Revision: D4053231
fbshipit-source-id: 29048de444ff5f6d7fe7dce7897399b483ee6d2d
Summary:
Combining 2 animated values via addition, multiplication, and modulo are already supported, and this adds another one: division.
There are some cases where an animated value needs to invert (1 / x) another animated value for calculation. An example is inverting a scale (2x --> 0.5x), e.g.:
```
const a = Animated.Value(1);
const b = Animated.divide(1, a);
Animated.spring(a, {
toValue: 2,
}).start();
```
`b` will then follow `a`'s spring animation and produce the value of `1 / a`.
The basic usage is like this:
```
<Animated.View style={{transform: [{scale: a}]}}>
<Animated.Image style={{transform: [{scale: b}]}} />
<Animated.View>
```
In this example, the inner image won't get stretched at all because the parent's scaling gets cancelled out.
Also added this to native animated implementation.
Reviewed By: foghina, mmmulani
Differential Revision: D3922891
fbshipit-source-id: 32508956c4b65b2deb7574d50a10c85b4809b961
Summary:
This diff adds support for value offsets on iOS. It separates out code originally submitted in #9048.
Test plan (required)
Set up an animation with an offset, and `useNativeModule: true`. Compare results with `useNativeModule: false`.
Closes https://github.com/facebook/react-native/pull/9627
Differential Revision: D3924410
fbshipit-source-id: 8177a25a5f6b9e33f00ea66143c782aeea24507d
Summary:
Add native support on iOS and Android for `Animated.diffClamp` that was added in #9419.
**Test plan**
Tested that it works properly using the native animations UIExplorer example.
Closes https://github.com/facebook/react-native/pull/9691
Differential Revision: D3813440
fbshipit-source-id: 48a3ecddf3708fa44b408954d3d8133ec8537f21
Summary:
This diff adds ModuloAnimatedNode on iOS. It separates out code originally submitted in #9048.
Test plan (required)
Set up an animation with a modulo node, and `useNativeModule: true`. Compare results with `useNativeModule: false`.
Closes https://github.com/facebook/react-native/pull/9626
Differential Revision: D3799636
fbshipit-source-id: 594499f11be41bf3ee709249056a3feedeace9eb
Summary:
Adds support for `Animated.Value#addListener` for native driven animated values. Same as #8844 but for iOS. This depends on some JS code in #8844 so only review the 2nd commit and let's wait for #8844 to land first.
**Test plan**
Tested using the UIExplorer example.
Closes https://github.com/facebook/react-native/pull/9194
Differential Revision: D3681749
fbshipit-source-id: 521a61e2221c1ad1f6f40c75dd2dc957361d0271
Summary:
This adds support for the `transform` animated node. This brings feature parity with the iOS implementation and allows running the NativeAnimated UIExplorer example that was created with the iOS implementation on Android. This is based on some work by kmagiera in the exponent RN fork.
This also adds support for mixing static values with animated ones in the same transform as well which is not supported on iOS at the moment. It is also implemented in a way that rebuilds the transform matrix the same way as we build it in JS so it will be easy to remove some of the current limitations like forcing the transforms order and only supporting one of each type.
**Test plan (required)**
Tested with the NativeAnimated example on Android and iOS. Also tested mixing in static values in a transform (`[{ rotate: '45deg' }, { translateX: animatedValue }]`).
Closes https://github.com/facebook/react-native/pull/8839
Differential Revision: D3682143
fbshipit-source-id: 5e6fd4b0b8be6a76053f24a36d1785771690a6f8
Summary:
The `NativeAnimationsExample` in Android can not work due to inputRange and outputRange were limited to double array type, which is different from iOS.
So we need let android version to support string array type.
Closes https://github.com/facebook/react-native/pull/8900
Differential Revision: D3674754
fbshipit-source-id: e7844f00940bf0fdd6f7f5003dd4eeefa0c317a0
Summary:
This diff addresses the issues raised by kmagiera in https://github.com/facebook/react-native/pull/7884. Transforms should be applied in the order they are defined, just like in `processTransform.js`. A scale applied before a translation, for instance, should give a different result than a translation applied before a scale.
We leverage CATransform3D to do the heavy lifting. A concatenated transform is passed all the way to `RCTViewPropertyMapper`. It is compared with the transform currently applied to the view, and if different, applied. The same approach is used for opacity.
I think it makes the most sense to do this diffing in `RCTViewPropertyMapper`, as opposed to creating and cleaning up an `_updatedPropsDictionary` each frame in `RCTTransformAnimatedNode` and `RCTStyleAnimatedNode`. The node should keep its full value; applying a minimal set of altered props is an optimization. The higher up this optimization is implemented, the more assumptions it makes. e.g. that there will only ever be a sing
Closes https://github.com/facebook/react-native/pull/9050
Differential Revision: D3658139
fbshipit-source-id: ad6286762ef734084cbdf83c9bd9241190302d34
Summary:
`Animated.parallel` among other functions expects the `start(callback)` function to be invoked with an `endState` object. Currently natively driven animations call the handler with `null`, this PR changes that to `{ finished: true }`.
**Test plan**
This should not throw any errors:
```js
Animated.parallel([
Animated.timing(
new Animated.Value(0),
{
toValue: 1,
useNativeDriver: true
}
),
Animated.timing(
new Animated.Value(0),
{
toValue: 1,
useNativeDriver: true
}
)
]).start();
```
Closes https://github.com/facebook/react-native/pull/8567
Differential Revision: D3517291
Pulled By: javache
fbshipit-source-id: 0056a5b4261546b061451c0b1b249718739086bc
Summary:
Currently on iOS animations are being performed on the JS thread. This ports animations over to the native thread and performs them natively. A lot of this work has already been done on Android, but this PR enables a few animation nodes that Android doesn't yet support such as Transform, Multiplication, and Addition nodes.
Also there is a demo of the native animations added to the UIExplorer app.
Closes https://github.com/facebook/react-native/pull/7884
Reviewed By: javache
Differential Revision: D3409179
Pulled By: nicklockwood
fbshipit-source-id: ef2d8840032e0c32f49e4a16ba86d448662e1751
Summary:
Currently on iOS animations are being performed on the JS thread. This ports animations over to the native thread and performs them natively. A lot of this work has already been done on Android, but this PR enables a few animation nodes that Android doesn't yet support such as Transform, Multiplication, and Addition nodes.
Also there is a demo of the native animations added to the UIExplorer app.
Closes https://github.com/facebook/react-native/pull/7884
Differential Revision: D3401811
Pulled By: nicklockwood
fbshipit-source-id: 709e533243130153febef03ddd60d39e9fe70e3e
Summary:
Currently on iOS animations are being performed on the JS thread. This ports animations over to the native thread and performs them natively. A lot of this work has already been done on Android, but this PR enables a few animation nodes that Android doesn't yet support such as Transform, Multiplication, and Addition nodes.
Also there is a demo of the native animations added to the UIExplorer app.
Closes https://github.com/facebook/react-native/pull/7884
Differential Revision: D3401811
Pulled By: nicklockwood
fbshipit-source-id: c8d750b75e4410923e17eaeb6dcaf079a09942e2
Genki Kondo
Andres Suarez
Samuel Susla
Peter Argany
Anatolii Shevchenko
Kevin Gozali
James Treanor
Min ho Kim
Mikael Sand
Spencer Ahrens
Christoph Nakazawa
Max Komarychev
Héctor Ramos
Vladislav Pilgasov
Sophie Alpert
Krzysztof Magiera
Janic Duplessis
Ryan Gomba
Pieter De Baets
leeight
Joel Arvidsson
Brandon Withrow
