* Revert ReacRevert React from 19 to 18.3.1 due to React 19 not being out as stable
\## Changelog
[General][Changed] - Revert from React 19 RC to React 18.3.1
* Revert from React 19 RC to React 18.3.1
\## Changelog
[General][Changed] - Revert from React 19RC to React 18.3.1
* Fix ruby tests
Summary:
Pull Request resolved: https://github.com/facebook/react-native/pull/44990
Upgrades React Native and Relay to depend on React 19, which is currently published as release candidates. This is in preparation for React Native 0.75.
This will depend on updating open source renderers after [facebook/react#29903](https://github.com/facebook/react/pull/29903) is merged.
Changelog:
[General][Changed] - Upgrade to React 19
Reviewed By: robhogan
Differential Revision: D58625271
fbshipit-source-id: f9ad95b18716a9ce02f7cfbcc7248bdfb244c010
Summary:
Pull Request resolved: https://github.com/facebook/react-native/pull/45002
There are a couple Jest unit test cases for `VirtualizedList-test.js` that require further investigation.
We believe that these are problems with Jest fake timers in the test and not with the component itself, so for now let's skip them so as to unblock the upgrade to React 19.
Changelog:
[Internal]
Reviewed By: robhogan
Differential Revision: D58656948
fbshipit-source-id: d52f3ad8277def6eae20cbbc11751d73b769d929
Summary:
Pull Request resolved: https://github.com/facebook/react-native/pull/44997
Wrap `VirtualizedList-test` uses of `react-test-renderer` in `act` as appropriate, so as to pass under current React and mostly pass under React 19, with further fixes to come.
Changelog: [Internal]
Reviewed By: robhogan
Differential Revision: D58649295
fbshipit-source-id: 5e0fa791d581fbf004a2ca7eaa5c4b4d9a15ddfe
Summary:
Migrate `VirtualizedSectionList-test` to use `act`-wrapping in prepation for React 19.
Avoid the `react-native/jest/renderer` abstractions as this is a separate package.
Changelog: [Internal]
Reviewed By: yungsters
Differential Revision: D58653558
fbshipit-source-id: 0e19fff5c3998fb00b71c3d07100a2064682cb4c
Summary:
Stacked on top of #28498 for test fixes.
### Don't Rethrow
When we started React it was 1:1 setState calls a series of renders and
if they error, it errors where the setState was called. Simple. However,
then batching came and the error actually got thrown somewhere else.
With concurrent mode, it's not even possible to get setState itself to
throw anymore.
In fact, all APIs that can rethrow out of React are executed either at
the root of the scheduler or inside a DOM event handler.
If you throw inside a React.startTransition callback that's sync, then
that will bubble out of the startTransition but if you throw inside an
async callback or a useTransition we now need to handle it at the hook
site. So in 19 we need to make all React.startTransition swallow the
error (and report them to reportError).
The only one remaining that can throw is flushSync but it doesn't really
make sense for it to throw at the callsite neither because batching.
Just because something rendered in this flush doesn't mean it was
rendered due to what was just scheduled and doesn't mean that it should
abort any of the remaining code afterwards. setState is fire and forget.
It's send an instruction elsewhere, it's not part of the current
imperative code.
Error boundaries never rethrow. Since you should really always have
error boundaries, most of the time, it wouldn't rethrow anyway.
Rethrowing also actually currently drops errors on the floor since we
can only rethrow the first error, so to avoid that we'd need to call
reportError anyway. This happens in RN events.
The other issue with rethrowing is that it logs an extra console.error.
Since we're not sure that user code will actually log it anywhere we
still log it too just like we do with errors inside error boundaries
which leads all of these to log twice.
The goal of this PR is to never rethrow out of React instead, errors
outside of error boundaries get logged to reportError. Event system
errors too.
### Breaking Changes
The main thing this affects is testing where you want to inspect the
errors thrown. To make it easier to port, if you're inside `act` we
track the error into act in an aggregate error and then rethrow it at
the root of `act`. Unlike before though, if you flush synchronously
inside of act it'll still continue until the end of act before
rethrowing.
I expect most user code breakages would be to migrate from `flushSync`
to `act` if you assert on throwing.
However, in the React repo we also have `internalAct` and the
`waitForThrow` helpers. Since these have to use public production
implementations we track these using the global onerror or process
uncaughtException. Unlike regular act, includes both event handler
errors and onRecoverableError by default too. Not just render/commit
errors. So I had to account for that in our tests.
We restore logging an extra log for uncaught errors after the main log
with the component stack in it. We use `console.warn`. This is not yet
ignorable if you preventDefault to the main error event. To avoid
confusion if you don't end up logging the error to console I just added
`An error occurred`.
### Polyfill
All browsers we support really supports `reportError` but not all test
and server environments do, so I implemented a polyfill for browser and
node in `shared/reportGlobalError`. I don't love that this is included
in all builds and gets duplicated into isomorphic even though it's not
actually needed in production. Maybe in the future we can require a
polyfill for this.
### Follow Ups
In a follow up, I'll make caught vs uncaught error handling be
configurable too.
---------
DiffTrain build for commit https://github.com/facebook/react/commit/6786563f3cbbc9b16d5a8187207b5bd904386e53.
Changelog:
[Internal]
Reviewed By: kassens
Differential Revision: D55408481
Pulled By: yungsters
fbshipit-source-id: 598aa306369e21cb3e93ad6041a87bfbaa9eef9e
Co-authored-by: Ricky Hanlon <rickhanlonii@gmail.com>
Summary:
Now that RN is providing TS type information, many of those .d.ts files depend on types from react. In modern packagemanagers (Ex: pnpm) types/react will not be available to RN since it does not declare it as a dependency.
I also noticed that the types for react-native-popup-menu-android appear to be pointing to the wrong location.
Add types/react as a peerDependency on the packages that have .d.ts files that import from React.
Add types/react to peerDependencyMeta with optional:true to prevent users not using TS from requiring types/react.
## Changelog:
[GENERAL] [ADDED] Added types/react as an optional peerDependency
Pull Request resolved: https://github.com/facebook/react-native/pull/43509
Reviewed By: cortinico
Differential Revision: D55225940
Pulled By: NickGerleman
fbshipit-source-id: 4cbab071928cb925baec45f55461559acc9a54e6
Summary:
Minor fix to package.json which newer version of npm warn about when publishing, after running `npm pkg fix -ws` on the workspace.
{F1470070110}
## Changelog: [Internal] npm pkg fix -ws
Pull Request resolved: https://github.com/facebook/react-native/pull/43519
Test Plan: eyescloseddog
Reviewed By: cortinico
Differential Revision: D55012872
Pulled By: blakef
fbshipit-source-id: ff3c63a3eefaf56d369219a3d4b32d44d6d842c9
Summary:
Pull Request resolved: https://github.com/facebook/react-native/pull/43458
The React sync in D54783723 was failing because some tests were relying on `console.error` being called as `console.error('Some message')` but it was refactored as `console.error('%s..', 'Some message')`, making them fail.
This fixes the tests by formatting the arguments passed to the console functions and checking against that instead.
Changelog: [internal]
Reviewed By: sammy-SC
Differential Revision: D54849485
fbshipit-source-id: 0648263614725ea3f9c95b9f9bb13005adae46eb
Summary:
Pull Request resolved: https://github.com/facebook/react-native/pull/43377
Fixes `VirtualizedList-test.js`, which assumes fake timers (e.g. using `jest.runAllTimers()` and `jest.runOnlyPendingTimers()`) but did not actually use fake timers.
Changelog:
[Internal]
Reviewed By: yungsters
Differential Revision: D54668281
fbshipit-source-id: b14757744bb7a21a4e5573053549c36178826021
Summary:
In setups with `pnpm` `react-native/virtualized-lists` gets bundled incorrectly because of the following error:
`Module not found: Error: Can't resolve 'react'`
As 'react' is used inside of the package, it should declared explicitly, instead of being a phantom dependency.
## Changelog:
[GENERAL] [FIXED] - Declare missing peer dependency `react`
Pull Request resolved: https://github.com/facebook/react-native/pull/42947
Test Plan: not needed
Reviewed By: NickGerleman
Differential Revision: D53617462
Pulled By: cortinico
fbshipit-source-id: 19a8fed94263646b0af93339d5c014e629dfa6b1
Summary:
Currently if the virtualized list content is small `onStartReached` won't be called initially when the list is mounted. This is because when the content is small `onEndReached` will be called initially preventing `onStartReached` from being called. In `_maybeCallOnEdgeReached` calling `onEndReached` and `onStartReached` are in the same conditional so they cannot both be triggered at once. To improve the consistency of `onStartReached` we should call both `onEndReached` and `onStartReached` if needed.
## Changelog:
[GENERAL] [FIXED] - Call onStartReached initially when list is small and `onEndReached` is called
Pull Request resolved: https://github.com/facebook/react-native/pull/42902
Test Plan:
I used this code to test in RN Tester (replace content of RNTesterAppShared.js)
```ts
import React, { useState, useEffect } from "react";
import { StyleSheet, FlatList, View, Text, TouchableOpacity } from "react-native";
function App() {
const [data, setData] = useState(generatePosts(4));
const [idCount, setIdCount] = useState(1);
const renderItem = ({ item }) => <Item data={item} />;
const keyExtractor = (item) => item.id.toString();
console.log("-------")
return (
<View style={{ flex: 1, marginVertical: 20 }}>
<FlatList
key={idCount}
data={data}
renderItem={renderItem}
keyExtractor={keyExtractor}
onEndReachedThreshold={0.05}
onEndReached={() => console.log("onEndReached")}
onStartReachedThreshold={0.05}
onStartReached={() => console.log("onStartReached")}
inverted
/>
<TouchableOpacity style={{height: 50, width: '100%', backgroundColor: 'purple'}} onPress={()=>{
setIdCount(state => state + 1)
setData(generatePosts(2))
}}><Text> Press</Text></TouchableOpacity>
</View>
);
}
function Item({ data }) {
return (
<View style={styles.item}>
<Text style={styles.title}>
{data.id} - {data.title}
</Text>
</View>
);
}
const styles = StyleSheet.create({
item: {
backgroundColor: "#f9c2ff",
padding: 20,
marginVertical: 8,
marginHorizontal: 16,
},
title: {
fontSize: 24,
},
});
const generatePosts = (count, start = 0) => {
return Array.from({ length: count }, (_, i) => ({
title: `Title ${start + i + 1}`,
vote: 10,
id: start + i,
}));
};
export default App;
```
Before the change only onEndReached is called, after the change both onStartReached and onEndReached is called.
Reviewed By: sammy-SC
Differential Revision: D53518434
Pulled By: cipolleschi
fbshipit-source-id: bc34e0d4758df6d5833be7290e5a66efaf252ffd
Summary:
The previous typing of FlatList and VirtualizedList did not convey any information on the type of the items passed in to `onViewableItemsChanged`, but instead the type was set to `any`. This PR adds the type information.
I set a default type `any` for thy ViewToken, because the type is exported and not having it would be a breaking change if that type is used. Like this it gracefully falls back to the default behavior of the `any` type.
Notice: I don't know how typing in "flow" works, but the same "issue" seems to be in there as well. Maybe someone with more flow experience can fix that as well:
https://github.com/facebook/react-native/blob/ae42e0202de2c3db489caf63839fced7b52efc5d/packages/virtualized-lists/Lists/ViewabilityHelper.js#L19-L20
## Changelog:
[GENERAL] [FIXED] - Add type information for items of VirtualizedList in `onViewableItemsChanged` signature
[GENERAL] [FIXED] - Add type information for items of FlatList in `onViewableItemsChanged` signature
Pull Request resolved: https://github.com/facebook/react-native/pull/42773
Test Plan:
Without the changes, typecheck of the project was fine, but with the changes applied to the node_modules/react-native copy a type error was found:
```
$ npm run typecheck
> my-project@1.0.0 typecheck
> tsc --skipLibCheck
src/MyComponent.tsx:385:29 - error TS2345: Argument of type '(string | number)[]' is not assignable to parameter of type 'number[]'.
Type 'string | number' is not assignable to type 'number'.
Type 'string' is not assignable to type 'number'.
385 viewableItems
~~~~~~~~~~~~~
386 .filter(
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
Reviewed By: rozele
Differential Revision: D53276749
Pulled By: NickGerleman
fbshipit-source-id: 3fa5c65b388a59942c106286ac502a85c583da50
Summary:
The logic to constrain the last spacer size is incorrect in some cases where the spacer is the last spacer, but not the last section in the list.
For more context, the role of spacer constraining is explained in this comment:
```
// Without getItemLayout, we limit our tail spacer to the _highestMeasuredFrameIndex to
// prevent the user for hyperscrolling into un-measured area because otherwise content will
// likely jump around as it renders in above the viewport.
```
For example it is incorrect in the case where we have:
ITEMS
SPACER
ITEMS
In this case the spacer is not actually the tail spacer so the constraining is incorrectly appied.
This causes issues mainly when using `maintainVisibleContentPosition` since it will cause it to scroll to an incorrect position and then cause the view that was supposed to stay visible to be virtualized away.
## Changelog:
[GENERAL] [FIXED] - Fix last spacer constrain logic in VirtualizedList
Pull Request resolved: https://github.com/facebook/react-native/pull/41846
Test Plan:
Tested using https://gist.github.com/janicduplessis/b67d1fafc08ef848378263208ab93d4c in RN tester, before the change content will jump on first click on add items.
Tested using the same example and setting initial posts to 1000, then we can see our content view size is still constrained properly (see scrolling indicator as reference).
Reviewed By: yungsters
Differential Revision: D51964500
Pulled By: NickGerleman
fbshipit-source-id: 4465aa5a36c95466aef6571314973c1e2c9a0f2c
Summary:
Pull Request resolved: https://github.com/facebook/react-native/pull/41381
Noticed that when scrolling VirtualizedList's CellRenderer was re-rendering due to `onCellFocusCapture` not having a stable identify. Change the interface to CellRenderer to pass in the `cellKey` in the callback to save on creating new callbacks.
Changelog: [Internal]
Reviewed By: sammy-SC
Differential Revision: D51112928
fbshipit-source-id: 3fcb974d9b5585403895746fbc45f2cf5a9fa6b1
React Native Bot
Riccardo Cipolleschi
Nicola Corti
Tim Yung
Rob Hogan
Sam Zhou
Fabrizio Cucci
sebmarkbageandRicky Hanlon
Andrew Coates
Blake Friedman
Rubén Norte
Rick Hanlon
Alex Hunt
Biki-das
Jakub Romanczyk
Janic Duplessis
Michael Lohmann
Pieter De Baets
Moti Zilberman
